Jump to content
SAU Community

Recommended Posts

Hi mates,

All parts removed from R32 RB26 engine with approx 80,000kms shown on clock, running great.

> Cam Shafts - $150

> 5 x Connecting Rods with Forged Pistons attached inc Caps and Bolts - $150

> Oil Pickup - $30

> Aluminium engine mounts (set) - $40

> Cam Belt lower pulley - $40

> Oil Sender unit c/w Water Cooler - $60

> CAS Aluminium Bracket - $25

> Cam Belt Idler/Tensioner inc Spring, Bolts, Nuts and Washers - $20

> Vacuum Tank - $40

> Vacuum/Boost/Water lines from underneath plenum - $50

> Auxillary Air Control Valve - $40

> Cold Start Air Bypass Regulator - $40

> Rear Main Seal Housing - $30

> Oil Pressure Sensor - $30

> ECU Water Temp Sensor - $30

> Intake Air Temp Sensor - $30

> Knock Sensors (set) - $80

> Thermostat Housing - $40

> Cam Gear Backing Plate - $50

> Dip Stick and Dipstick Tube - $25

Ive also got a heap of bolts and bits and pieces, so if you need anything like that just ask and I may have it.

Located in Melbourne, happy to post all items, just PM me with what youre after and your postcode.

Cheers,

Mat.

0400 558 030

Link to comment
https://www.sau.com.au/forums/topic/309515-rb26-engine-parts/
Share on other sites

Hi mates,

All parts removed from R32 RB26 engine with approx 80,000kms shown on clock, running great.

> Cam Shafts - $150

> 5 x Connecting Rods with Forged Pistons attached inc Caps and Bolts - $150

> Oil Pickup - $30

> Aluminium engine mounts (set) - $40

> Cam Belt lower pulley - $40

> Oil Sender unit c/w Water Cooler - $60

> CAS Aluminium Bracket - $25

> Cam Belt Idler/Tensioner inc Spring, Bolts, Nuts and Washers - $20

> Vacuum Tank - $40

> Vacuum/Boost/Water lines from underneath plenum - $50

> Auxillary Air Control Valve - $40

> Cold Start Air Bypass Regulator - $40

> Rear Main Seal Housing - $30

> Oil Pressure Sensor - $30

> ECU Water Temp Sensor - $30

> Intake Air Temp Sensor - $30

> Knock Sensors (set) - $80

> Thermostat Housing - $40

> Cam Gear Backing Plate - $50

> Dip Stick and Dipstick Tube - $25

Ive also got a heap of bolts and bits and pieces, so if you need anything like that just ask and I may have it.

Located in Melbourne, happy to post all items, just PM me with what youre after and your postcode.

Cheers,

Mat.

0400 558 030

Hi Mat,

Are they GTR parts?

Thanks

  • 2 weeks later...

pistons have no markings but build appears to be fully jap, they measured at an amazing 87.5mm, and considering there is only 4, theyre useless ;)

good for paperweights or ashtrays.

  • 4 weeks later...
oil and water lines for turbo's?

I have only the lines that bolt directly to the core of the turbos and mount off the comp cover. Nothing that bolts to the block. $20 for both.

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I don't know it is due to that. It could just be due to load on track being more than a dyno. But it would be nice to rule it out. We're talking a fraction of a second of pulling ~1 degree of timing. So it's not a lot, but I'd rather it be 0... Thicker oil isn't really a "bandaid" if it's oil that is going to run at 125C, is it? It will be thicker at 100 and thus at 125, where the 40 weight may not be as thick as one may like for that use. I already have a big pump that has been ported. They (They in this instance being the guy that built my heads) port them so they flow more at lower RPM but have a bypass spring that I believe is ~70psi. I have seen 70psi of oil pressure up top in the past, before I knew I had this leak. I have a 25 row oil cooler that takes up all the space in the driver side guard. It is interesting that GM themselves recommend 0-30 oil for their Vette applications. Unless you take it to the track where the official word is to put 20-50w oil in there, then take that back out after your track day is done and return to 0-30.
    • Nice, looks great. Nice work getting the factory parts also. Never know when you'll need them.
    • Thanks @jtha7 I will have a look around tomorrow but it is a prick of a spot. These are some photos i tried taking 
    • I take it that the knock retard is from bearings tapping a little tune? Thicker oil is a fragile bandaid. You need a much bigger oil cooler and probably the bigger pump being discussed.
    • Hi @Chupapy i had several leaks from coolant pipes being corroded, i also had one leak on back of the head onto transmission. For me that leak was from the turbo water line. Follow the line to the back of the head The hose and metal pipe had perished these are the best pics I took of it at the time
×
×
  • Create New...