Jump to content
SAU Community

Recommended Posts

Hey all,

Got a couple of well mannered friends together for a small cruise on Saturday the 6th of March. It's not going to be a long cruise, looking at 1-2 hours max. Have not yet decided on a destination. The starting point will be at Dan Murphy's car park in Rouse Hill, the starting time depends on where we are headed.

Everyone is welcome to come and throw some suggestions as to where we could take the cruise to.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/309649-saturday-6th-of-march-cruise/
Share on other sites

There is no reason why you couldn't have Unigroup as the destination!

For example Linky McLink Link of Linkertown

Meet at Rouse Hill at say 12 mid day, leave at 12:30, drive through Galston Gorge and wind up at Girraween :)

*Cassbo may or may not participate in any cruise before dyno day as he is a lazeh mofo* :D

not really, just going to meet up at uni-group (any time after 3) and hang out there for a while. If anyone wants to go for a cruise after that me and my mates are up for it. Doesn't matter where we go, maybe towards the city or something..? Where ever the wind takes us really - how a real cruise should be lol.

not really, just going to meet up at uni-group (any time after 3) and hang out there for a while. If anyone wants to go for a cruise after that me and my mates are up for it. Doesn't matter where we go, maybe towards the city or something..? Where ever the wind takes us really - how a real cruise should be lol.

where is uni group? lol

Im up for a cruise but is that mean we going through tolls if we go towards the city?

I was told some toll bridges dont have change gates?

where is uni group? lol

Im up for a cruise but is that mean we going through tolls if we go towards the city?

I was told some toll bridges dont have change gates?

There are plenty of ways to get to Unigroup (Unit 17/17a Amax Avenue, Girraween, 2145) and not hit a single toll. In fact, if you do go through a toll gate on the way from Richmond to Girraween, you probably went the super-long tourist way.

correct ^^. In terms of going for a drive afterwards we can iron out all those details at uni group. If you take victoria raod and anzac bridge you wont hit any tolls. There is no point taking expressways on saturdays anyway as there is barely any traffic.

not really, just going to meet up at uni-group (any time after 3) and hang out there for a while. If anyone wants to go for a cruise after that me and my mates are up for it. Doesn't matter where we go, maybe towards the city or something..? Where ever the wind takes us really - how a real cruise should be lol.

So in conclusion Ill just rock up anytime after 3pm at uni group ? lol

what about that idea of meeting at Rouse hill then going along this ROUTE ??



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...