Jump to content
SAU Community

Recommended Posts

Victorian Drift Club Practice Day

~ Sunday 21st March 2010 ~

This is an OPEN event for all (VDC membership not required), with no comp.

The beginners area will be open with tutors to help out the newbies.

Location

Winton Racway

Benalla

Victoria

Entry Prices:

$15 gate fee (Applicable to all inc spectators)

$20 - Passenger ride (Please note Passengers must adhere to the same dress standards as drivers, eg long sleeve top, pants, closed footwear and helmet)

Driver Prices:

$130 Members

$140 Non Members

Other Prices:

VDC membership $85 (Once off $20 admin fee incorporated)

VDC membership renewal $65

Please note : From 2010, VDC will run the practice day in group sessions, each group consists of drivers at the same skill level. It is the drivers responsibility to choose their group according to their skill level. The groups are:

A – Expert,

B – Intermediate,

C- Novice,

L – Beginners (Restricted to beginners section of track).

VDC reserves the right to move a driver up or down a level depending on group size and/or if their level does not match the group standard

Payment Options and pre-entry forms can be found here:

http://www.vicdrift.com/forums/index.php?showtopic=981

Pre-Entry and Pre-pay is now compulsory to reserve your spot for the day.

Entries will be capped at 75 drivers.

Not only does it save you money, it also saves time in the morning as you only have to show your cams/aasa license and collect your arm bands! How easy is that!

Please encourage your mates to pre-enter too!

Pre-entries are now being taken. No direct deposits will be taken after the 17th of March.

Acceptable Licenses are: AASA or Cams L2NS - No license means no going on the track!

On the day purchase of AASA license:

AASA license $50

(Can be purchased at the Winton office on the morning of the drift day. This needs to be done before you come into the scrutineering bay to register and have your car scrutineered as entries will not be accepted without proof of license or receipt of payment from Winton)

Please note : VDC board members will be checking aasa and cams licenses, this year we will be checking everyone. Please ensure all your licenses and memberships are valid.

The usual requirements as always are:

*Long sleeve and long pants of non flammable materials i.e. No Nylon

*Closed footwear

*Helmet that complies to Australian Standards (has ASA or Snell Sticker)

*Car needs to be in a good condition, no oil leaks, no loose items in the car and battery secure. It must pass scrutineering to be allowed on the track!

*Working seat belt/s (give it a pull and make sure it locks)

*Passengers will only be permitted in cars with half/full roll cages. Passengers must also be wearing the appropriate clothing, footwear and helmet. They must also abide by the track rules or they will not be allowed to go on the track. Drivers will also be held accountable for their passengers following the track rules!

* Every car must have the correct amount of wheel nuts:wheel studs. Get it right before you get to the track!

* All cars must run some form of muffler/resonator/catalytic converter on their car. You only have to run one of the mentioned forms of a spark arrester.

* All forms of wastegates on turbocharged vehicles are ALLOWED

* All cars must ensure their exhaust exits past the perimeter of the car, "dropped pipes" are NOT ALLOWED

Basic Scrutineering Guide can be found here:

http://www.vicdrift.com/forums/index.php?showtopic=674

* FIRE EXTINGUISHERS ARE COMPULSORY AND MUST BE FITTED CORRECTLY IN THE CAR AND WITHIN EASY REACH OF THE DRIVER!

Can't make this one, see below for the rest of 2010 events:

http://www.vicdrift.com/forums/index.php?showtopic=946

Edited by YNOTSX
Link to comment
https://www.sau.com.au/forums/topic/309684-victorian-drift-club-practice-day/
Share on other sites

Looks awesome!

Sooooooooooooo much track time. Most other racing events dont get the kind of track time these drift days get! So if you want value for money, get your drift on!

There is a beginner section as well, so you don;t have to be stressed about being in the way of other drivers! Tutoring is available

here is last years members day event!

http://vimeo.com/8905585

Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
    • Yeah mate, never miss it.
×
×
  • Create New...