Jump to content
SAU Community

Recommended Posts

i have a friend that lives in maroochydore, qld and he's yellow 1993' rb25det was stolen a while ago, not sure if asking on here is any help but its worth a try, is there anything i can do to possibly track down the car? it was a professional job a few cars got done in his street the same night.

Link to comment
https://www.sau.com.au/forums/topic/310126-how-to-find-a-stolen-car/
Share on other sites

  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Three reasons to steal a car.

# Joy ride

# Sell for parts

# Re-birth

Only 1 of those usually results in getting the car back. Guess which one. The answer is no, you can't do sh*t and odds are if it was a 'professional job' then he won't be seeing his car ever again.

+1 for insurance so long as it's 'Agreed Value' Comprehensive & all mods and updated rims noted.

Insurance companies tend to screw the policy holder if he/she only has 'Market Value'

Edited by CARSICK

lol musta been a kid or something, after working around cars for a while i realize they're really easy to steal.Not that i'd steal a car as i've always had my own so theres no need, i had a sunfire with PASSLOCK and installed an ignition from an older car that didnt have it but theres a way to bypass it with a resistor, well i had to use a multimeter first but when i put that on it did something to it and bypassed it lol.The theft light just flashed all the time after that.

gone in 60 seconds, best movie in the world :P, my mate is pretty aware that theres a very little chance of getting it back, i told him id just ask and see what other people say incase there was like a special investigator or something we could go to, but if it's been used for parts or something like that it could be on 50 different r33's around the world lol. im pretty sure the most professional person could not steal my car right now, they would have a fulty immobiliser, most of the turbo side pulled appart, electrical wires unplugged everywhere under the hood, it has no oil or coolant & on ramps with the front spoiler removed, ha.

to have more of a chance of someone not stealing ya car try,

Parking next to kerb and turning the wheels fullock into the kerb till the steering lock pops.

If you park your car out the front of your house try park it under a street light

If you park you car out side your house and its a daily, work out how much fuel u need to get to work each day, say it be 15L, Put 15-20L of fuel in each morning, instead of filling up at the start of the week, that why the dicks will

have to get fuel once they take off in ya car, or they will run out near by your house.

Always have a kill switch, even no they are stupid easy to get past, have a ignition kill switch and a fuel pump kill switch put em in random spots, anything to slow them down abit,

Alarm well thats the same as the switch its goin to slow em down....

Steering lock, they easy to, but i still like to put one on.

Other people ive seen with those biggass yellow Wheel locks that rap around your rear wheel, a bitch to put on everynite, but hey... they work.

Flame me as much as u want, i still think doin all these things would make it harder for somone to steel your car, i dont care what anyone says.

it took me and my dad 45 mins a really low car reailer & allot of sweat & tears to get my lowered skyline onto a car trainer not to mention i cracked the center muffler doing it, it also made a hell of a noise with chains and what not, im sure id hear it happen.

think tow truck.

meh, club lock, alarm, immobiliser, even take the coil pack loom off or the coilpacks if you're that paranoid, if they still take it they are likely pros and have been sussing it out for a while.

I've heard of people having D shackles set into concrete floors so that chains can be put through the wheels (have seen pics of this done in a garage which housed a VL Group A lol).

think tow truck.

meh, club lock, alarm, immobiliser, even take the coil pack loom off or the coilpacks if you're that paranoid, if they still take it they are likely pros and have been sussing it out for a while.

I've heard of people having D shackles set into concrete floors so that chains can be put through the wheels (have seen pics of this done in a garage which housed a VL Group A lol).

Ha ha ha... I like that.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...