Jump to content
SAU Community

Recommended Posts

ok ive been instructed by the people that tune my car that i need a better cat on my car ( really big and very high flowing) as the one i have now is restricting the power output.

before people start saying just gut the one i have now, NO! the car is already loud enough as it is and draws enough attention already and ive done it to a previous car and im not polishing the rear bar every single week.

ive had a little bit of a search but nothing really helped me out

im after what brands that are proven to be very effective and where can i buy them.

looking for something like a 5-6" body with 3.5-4" inlet and outlets

Thanks in advance

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/
Share on other sites

Chris, I'd suggest looking at something like the 5" body Catco Metal Cat.

With most of the big body cat's you will need to have them flanged to suit your current exhaust.

yeh i kinda figured that it would need to be a custom job which i dont mind. where bouts can you get these 5" body catco metal cats? any links to websites would be great

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118040
Share on other sites

yeh i kinda figured that it would need to be a custom job which i dont mind. where bouts can you get these 5" body catco metal cats? any links to websites would be great

Try Just Jap, they may not stock the big ones (a lot of places don't) but they should be able to source the one you need from Catco.

Let me know how you go as I will be chasing one soon also.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118091
Share on other sites

I think this is about the cheapest you'll find one:

http://www.fordxr6turbo.com/forum/100Cpi-R...598#entry986598

If you dont want to join the forum you can email chris on [email protected]

Oh and standard xr6t cats usually get swapped out between 270 and 300rwkw. I wouldnt try to push much more through them.

Edited by gregor
Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118126
Share on other sites

I was recently quoted $340 for a naked (unflanged) 5" body ballistic CAT. I am going to mate these to 3.5" flanges

Refer to below link for flow results (having trouble inserting as hyperlink)

www.surefloexhaust.com.au/cc.htm

Edited by gtr fan
Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118230
Share on other sites

I was recently quoted $340 for a naked (unflanged) 5" body ballistic CAT. I am going to mate these to 3.5" flanges

Refer to below link for flow results (having trouble inserting as hyperlink)

www.surefloexhaust.com.au/cc.htm

Love a good naked cat - $340.00 seems reasonable.

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118235
Share on other sites

You can get 3 or 3.5" inlets and its a 5 inch body, they are unpolished but stainless steel. I'm a member on there so maybe thats why you can't see it but just email him at the address i listed or join the forum and the link above should work. Chris runs rapid systems, one of the xr6 forum sponsors and he usually gives pretty quick responses.

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118260
Share on other sites

I was recently quoted $340 for a naked (unflanged) 5" body ballistic CAT. I am going to mate these to 3.5" flanges

Refer to below link for flow results (having trouble inserting as hyperlink)

www.surefloexhaust.com.au/cc.htm

yeh i had a little bit of a look at these and they sound ok but everyone can claim what they want. what ever one i end up getting it has to be able to flow 450kw and above

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118390
Share on other sites

You can get 3 or 3.5" inlets and its a 5 inch body, they are unpolished but stainless steel. I'm a member on there so maybe thats why you can't see it but just email him at the address i listed or join the forum and the link above should work. Chris runs rapid systems, one of the xr6 forum sponsors and he usually gives pretty quick responses.

so what cats are you selling on your forums? xr6 ones or these ballistic cats???

also the link for the ballistic ones has no contact info for them, only product info, where can you buys these from?

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118396
Share on other sites

so what cats are you selling on your forums? xr6 ones or these ballistic cats???

also the link for the ballistic ones has no contact info for them, only product info, where can you buys these from?

surefloexhaust.com.au

Link to comment
https://www.sau.com.au/forums/topic/310712-cat-convertors/#findComment-5118466
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, I can recommend the partial AV system translation CD I ordered from Car Audio Workshop in NZ. Whilst it didn't address the date issue, it has conveniently translated on-screen menu items into English, and now allows the GPS-received time to be offset in hours rather than minutes, so I can display Eastern Australian time accurately ( and bump it by another hour when daylight savings starts ).
    • Yuh, if it's 45°C outside, my car is driving in it.
    • I'd be curious to hear more. Otherwise, have you driven a modern x-trail? I wonder how it compares. Here in Australia they are/were popular for rentals and fleet vehicles. I have been in some and my impression was they are bad. But, this may have been very different in the 2000s at a good trim level. Twenty years is plenty of time to make the model worse. I do very much agree with the 2 silver cars in the garage approach. But, not driving because it's too hot would not leave a lot of time in the year for many Australians. I don't think you need to worry too much unless the car has actual issues with overheating. 
    • Back again. I returned to Japan in Jul/Aug to spend time with the car on my birthday and remind myself what all the sacrifice and compromise is for. It happened to line up with the monthly morning meet in Okutama, which I have been wanting to go to for a long time. It's a unique event at a unique spot with really rare, interesting, and quirky cars. It's where all the oldheads and OGs gather. The nighttime scene at DKF certainly has its place and should be experienced if you're into cars, but there's too much bad attention and negativity around it now. IMO the better time is Sunday morning at DKF or Okutama; it's more chill and relaxed. I'm glad I was finally able to go, but not sure it's worth the drive from all the way from Nagoya immediately the day before, unless I was already staying in Tokyo for the days right before the meet, because you have to wake up quite early to make it in time. Funnily enough though I didn't drive the car all that much this trip because it was just too damn hot. While there were zero issues and running temps were nominal and the A/C was strong, RBs already run crazy hot as it is. Sure, it took it all like a champ but something about driving these cars in the ridiculous heat/humidity bothers me and makes me feel like I'm asking too much of it. I'm just me being weird and treating the car like a living thing with feelings; I'm mechanically sympathetic to a fault. Instead I was mainly driving something else around - a KX4(silver) 2001 X-Trail GT, that I acquired in May. There's a few different flavors to choose from with Xs, but visually it's the Nissan version of the Honda CR-V. Mechanically it's a whole different story as this, being the top-trim GT, has an SR20VET mated to a four-speed auto and full-time AWD! It was a very affordable buy in exceptional condition inside and out, with very low mileage...only 48k kms. Most likely it was owned by an older person who kept it garaged and well-maintained, so I'm really happy with how it all worked out. It literally needs zero attention at the moment, albeit except for some minor visual touch-ups. I wanted something quirky, interesting, and practical and for sure it handily delivers on all three of those aspects. I was immediately able to utilize the cargo and passenger capacity to its full extent. It's a lot of fun to drive and is quite punchy through 1st and 2nd. It's very unassuming -in the twisty bits it's a lot more composed than one would think at a glance- and it'll be even better once I get better tires on it(yes, it's an SUV but still a little boat-y for my liking). So...now I have two golden-era Nissans in silver. One sports car and one that does everything else; the perfect two-car solution I think👍 The rest of the trip...I was able to turn my stressed brain off and enjoy it, although I didn't quite get to do as much as I thought. I did some interesting things, met some interesting people, and happened into some interesting situations however, that's all for another post though only if people really want to know. Project-wise, I went back to Mine's again to discuss more plans and am hoping to wrap that up real soon; keep watching this space if that interests you. Additionally, while working in the tormenting sweatbox that is the warehouse, I was able to organize most of the myriad of parts that my friend is storing for me along with the cars, and the 34 has a nice little spot carved out for it: And since it can get so stupid hot in there, that made it all the more easy -after I was standing there looking at the car and said 'f**k it'- to finally remove all the damn gauges that have mostly been an eyesore all this time. Huzzah. The heat basically makes the adhesive backing on the gauge mounts more pliable to work with, so it was far less stressful getting this done. I didn't fully clean it up or chase the wiring though; that will happen once I have the car in closer possession. Another major reason to remove all that stuff is to give people less reasons to get in my car and steal s**t while it's being exported/imported when/if the time comes, which leads us to my next point... ...and that is even though it's time in Japan is technically almost up since it's a November car and the X would be coming in March, I'm still not entirely sure where my life and career is headed; I don't really know what the future looks like and where I'm going to end up. I feel there's a great deal of uncertainty with me and as a result of that, it feels like I'm at a crossroads moreso now than any point in my life thus far and there are some choices I need to make. Yes, I've had some years to consider things and prepare myself, however too much has happened in that time to maintain confidence and everything feels so up in the air; tenuous one might say. Simply put, there's just too much nonsense going on right now from multiple vectors. Admittedly, I'm struggling to stay in the game and keep my eyes on the prize. So much so in fact, that very recently I came the closest I ever have before to calling it quits outright; selling everything and moving on and not looking back. The astute among you will pick up on key subtext within this paragraph. In the meantime I've still managed to slowly acquire some final bits for the car, but it feels nice knowing there's not much left to get and I'm almost across that finish line; I have almost everything I'll ever want for my interpretation and expression on what it is I think an R34 should be. 'til later.
    • Thanks for that, hadn’t used my brain enough to think about that. 
×
×
  • Create New...