Jump to content
SAU Community

Recommended Posts

NPC make some of the best clutches around. Their twins are used in 1000+hp cars. I run an NPC single with 600hp no problems !

only a single.... launchs, drivability ?? do you know if they are like the Jim Berry ones which have mega clamp like the one I have now with 4200lbs clamp, feels like a sledgehammer hitting the drivetrain ?

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-5121815
Share on other sites

only a single.... launchs, drivability ?? do you know if they are like the Jim Berry ones which have mega clamp like the one I have now with 4200lbs clamp, feels like a sledgehammer hitting the drivetrain ?

Having used both Jim Berry single plate and NPC id have to say that both are excellent in high horsepower applications. My current NPC twin plate cops over 1000hp every launch and is nice and quiet unlike the Jap items that have that annoying rattle.

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-5121833
Share on other sites

thanks guys, sounds like NPC know what they are doing... will call Doug back and get me one....

still trying to get head around 9 seconds-------------- respect

the 9.4 was a piece of cake...car was not properly sorted...this time next week will see some real numbers :)

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-5122221
Share on other sites

  • 5 weeks later...
Has anyone had any good or bad experiences with the NPC range of twin plates..........

or what about nismo coppermix twins are they rebuildable ???

I had one in my rb30/26 running 580hp and the preasure plate smashed after a week and destroyed my gear box. I was only running the cluch in no launches at all. It was a single plate 5puk from npc

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-5167836
Share on other sites

ive used alot of clutch brands and my npc twin is by far the best drivability and ive never had any hint of slip with 600rwhp, 1750kg car and revlimiter drag launches with a dogbox. I have used an os giken quad and it was annoying to drive, on and off engagement which sucks. The NPC is so smooth to engage and its such a soft pedal feel considering the power it can hold. I would have no issue using it as a daily driver clutch its great.

Ive also used direct clutch twin plate, extreme singles as well to compare.

They are cheap too compared to the jap brand options so its definately got no compromises.

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-5167938
Share on other sites

  • 1 year later...

I had one in my rb30/26 running 580hp and the preasure plate smashed after a week and destroyed my gear box. I was only running the cluch in no launches at all. It was a single plate 5puk from npc

From the last time it shit its self I sent it back and had it rebuilt to handle even more power. Funny thing is I'm running less power then last time. Now 450hp and the piece of shit clutch let go yet once again but this time it smashed the box clean off the block. I was changing from 2nd to 3rd. I should of learnt work's the first time it let go. Now I will use what I know works. Hks or os or a orc so I don't have to pay labour to remove the gear box and pay for a new box and clutch because some price of shit clutch can't handle half of what it is built for. Buyers be warned. And customer service is f**ked when you send them back. They try anything to get out of it

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-6155365
Share on other sites

was this the NPC 10inch ceramic button sprung clutch? I'm having one installed in my GTR today (380awkw) - I hope to God that I don't have the issues that happened to you. I guess I'll find out soon enough lol

From the last time it shit its self I sent it back and had it rebuilt to handle even more power. Funny thing is I'm running less power then last time. Now 450hp and the piece of shit clutch let go yet once again but this time it smashed the box clean off the block. I was changing from 2nd to 3rd. I should of learnt work's the first time it let go. Now I will use what I know works. Hks or os or a orc so I don't have to pay labour to remove the gear box and pay for a new box and clutch because some price of shit clutch can't handle half of what it is built for. Buyers be warned. And customer service is f**ked when you send them back. They try anything to get out of it

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-6160728
Share on other sites

was this the NPC 10inch ceramic button sprung clutch? I'm having one installed in my GTR today (380awkw) - I hope to God that I don't have the issues that happened to you. I guess I'll find out soon enough lol

I have that clutch, no problems at all

Not as much power as you but

Can I ask why you didnt go for a twin plate NPC?

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-6160762
Share on other sites

basically I just wanted a quick swap over clutch so I didnt have to leave my car at a shop for a week or two while my OS Giken twin plate gets rebuilt. I was told this clutch can handle 600hp at the wheels - so I thought I would try it (cost were much cheaper than the NPC twin). At worst I can always get the OS Giken reinstalled (after rebuilt) if I'm not happy with the NPC 10" ceramic button sprung clutch.

I'll do a review on the NPC 10" ceramic button sprung clutch after I run it in - will post it on this website. Hopefully my pressure plate won't explode.

I have that clutch, no problems at all

Not as much power as you but

Can I ask why you didnt go for a twin plate NPC?

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-6160827
Share on other sites

basically I just wanted a quick swap over clutch so I didnt have to leave my car at a shop for a week or two while my OS Giken twin plate gets rebuilt. I was told this clutch can handle 600hp at the wheels - so I thought I would try it (cost were much cheaper than the NPC twin). At worst I can always get the OS Giken reinstalled (after rebuilt) if I'm not happy with the NPC 10" ceramic button sprung clutch.

I'll do a review on the NPC 10" ceramic button sprung clutch after I run it in - will post it on this website. Hopefully my pressure plate won't explode.

Ah fair enough

Not sure if theres any difference between the GTR and GTST clutches, but mine has a lighter pedal feel than my old exedy cushion button, isnt to much worse to live with every day (takes a little while to get used to but not so bad)

Bites damn hard, and has never slipped for me once. Going strong for over a year now.

I dunno what else to say about it lol

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-6160922
Share on other sites

that sounds positive - hopefully my new clutch performs like yours

Ah fair enough

Not sure if theres any difference between the GTR and GTST clutches, but mine has a lighter pedal feel than my old exedy cushion button, isnt to much worse to live with every day (takes a little while to get used to but not so bad)

Bites damn hard, and has never slipped for me once. Going strong for over a year now.

I dunno what else to say about it lol

Link to comment
https://www.sau.com.au/forums/topic/311033-npc-clutches/#findComment-6160975
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
    • Here's an idea, answer the questions I asked you as they are trying to work out WHY the LSD will be binding up in a straight line.
    • You haven't driven many modern cars then have you? Most of them have sfa steering feel with their stupid electric bullshit steering systems.
×
×
  • Create New...