Jump to content
SAU Community

Recommended Posts

No, just drive it gently (ie not high revs and full boost) for a few minutes before you get to your destination, or leave it running for a minute or 2 before you turn it off
spot on , no need for turb timers just stay with your car for a couple minutes
spot on , no need for turb timers just stay with your car for a couple minutes

Personally I love my turbo timer. They cost peanuts and worth every penny. When you stop your car the last thing you want to do is sit in it for 2 minutes twiddling your thumbs, especially after a late night, or arriving at a party, or anything really. Especially when you have passengers or family in the car, it's awkward to explain to them that you can't walk into the restaurant with them just yet because your car has to idle for 2 minutes. Don't be a tightass, buy one.

Also, make sure you check with your insurer and state regulations about the legality of having a turbo timer installed...

Good point, realistically they are not necessary. The last few minutes of your drive just take it easy & drive casually until your ready to park it.

Providing your not thrashing the pants until you turn the car off the air passing through engine bay & your oil pump pumping oil through the engine will be getting the temperature of the turbo down sufficiently.

If for some reason you are unable to do the said casual drive, then sitting at idle for a few minutes will achieve a similar result-however more temperature remains in engine bay due to it sitting still & still running-not enough to do damage on any of the 3 turbo'd cars I've owned & countless trucks I have driven by using this method.

Timers are handy tho-they can cover you for any unlisted situation above lol, but roadside laws can prevent their lawful use so best to spk to your local M.O.T about when & where they can be used if at all

For the record-I have one on my current car & use it as a back up

hope that helps

This question seems to come up a lot on here.

If you do a search you'll find several posts already....

I agree with most of the replies above saying the turbo timer is unnecessary. I had one on one of the 4 turbo cars I've owned and I must say its got to be the most annoying thing I ever did and it also makes you look like a tool IMO.

If you're on a public road etc its illegal to walk more than 1.5m from your car while its running, so its pretty much pointless. Not just that, but it will affect your immobiliser/alarm so your car is potentially not secure while the turbo timer is armed (depending on the setup). Mine was a pain in the neck because it messed with the central locking...which was tied into the alarm remote.

Secondly, you shouldn't need to run it for more than 1 minute after you stop (unless you've literally been redlining it up your street and then instantly pull over and stop). Most of the time if you're cruising along at the speed limit the turbo will be sitting idle. Its only when your revs go above say 2000rpm that its actually doing anything, and when you're cruising at constant speed it will already be starting to cool.

The reason for leaving the engine running is so that it still has oil & coolant flowing through it while it spins down and cools. These days with ball bearing turbos (incl factory one) its not as big a deal and like I said above, unless you're a leadfoot who is constantly on boost, it really is a waste of money. Even without one, it would take a lot of turning the car off while its red hot before it gets any damage. FWIW your engine also gets hot and will cool down just fine with no coolant running through it.

To put everything in perspective, if your driving style is such that your turbo is always hitting near max boost all the time, I really doubt the turbo timer will save your turbo. On the other hand, if you drive like most people, only hitting boost when accelerating and then cruising at the speed limit, you shouldn't ever need to think about it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hang on. Let me get this straight. The desire is to have coilovers, BC in particular, to be MORE comfortable on Sydney roads than stock suspension? Well, that's obviously not right. BCs have crude damping design at the very best, and typically hard spring rates. BC stands for Billy Cart. And then, the desire is to put in some shitty old worn out stockers, to get it blue slipped and then put the BCs back in? And then.....what? Not worry about getting pulled up by the Plod? Because you seem to have raised a worry about paying for engineering (which actually does solve all your legality problems) and still getting pulled up.... but the only problem there is that if/when that happens you have to show your paperwork at the inspection station. Whereas, if you just swap in borrowed shitty old stockers to get it slipped now, and then you get defected in the future, you have to go find more shitty old stockers then too. You course of action looks like this set of options: Buy brand new stock type dampers, and springs. probably cost a bit more than $1k all up, but will last for the remaining life of the car. Put them in, pass inspection, drive on them forever more. Hell, they could even be really nice Bilsteins and Kings or other lower&stiffer springs if you wanted. Get the car engineered as is. ~$1k. Buy new Shockworks coilvers (or MCA) and also pay for engineering. You're spending a lot more here. But these will be the best things that you could drive around on.
    • Might be worthwhile hitting up Facebook's groups, I know most of them contain terrible people and scammers - however you might be able to find someone that's in Sydney with factory suspension you could purchase and/or hire. Just do not send any form of money anywhere, in person cash only.
    • Thanks @Duncan Ride height is fine. I think it's almost stock tbh. Happy to share a pic. I don't actually have a regular mechanic as haven't lived in Sydney too long. Could you or anyone recommend any shops in Sydney?
    • You just need a different blue slip shop (preferably one you regularly use as a mechanic), and make sure the coil overs are as close as possible to standard height
    • yeah the sugar refining companies were pushing for the same in Oz originally, all fuels were going to have 10% ethanol to make them "cheaper" (noting, that the loss in l/100 might be greater than the decrease in price). I guess they won that fight in Canadia
×
×
  • Create New...