Jump to content
SAU Community

Recommended Posts

Hi everyone,

I just bought my 2005 v35 250GT and found that when i used the lock button switch, all doors locking fine except the driver door.

So i have to lock the driver door using the latch.

Is this normal?

When i press the lock button switch again, all doors will unlock no problem.

I dont have any problem lock/unlock the doors using the I-key / the switch on the door.

As i have warranty for car and if there is a problem, i'll take it back to the dealer and ask them to fix it.

Link to comment
https://www.sau.com.au/forums/topic/311627-2005-v35-locking-door-problem/
Share on other sites

Hi everyone,

I just bought my 2005 v35 250GT and found that when i used the lock button switch, all doors locking fine except the driver door.

So i have to lock the driver door using the latch.

Is this normal?

That is normal.

If you want all of the doors locked at once, just flick the latch on the drivers door and they all will lock

Edited by iamhe77

Thanks jamhe77!

As my old car when i use the door lock button, its locked all doors.

This is my first Nissan and didnt know its normal.

Also my unlce have a 1998 Maxima and his car does the same thing too when he used the door lock button to lock all doors.

Only the driver side doesnt lock.

Thanks guys.

on the BCM there are two wires. heavy purple and heavy yellow. clip the yellow and tie teh harness side of it to the purple wire. tape off the plug side of the yellow wire. job done 2/4 doors with the lock switch.

Hi Chris,

Here is a photo of the BCM in my car and i just need to join these purple and yellow wires together?

I also noticed when i unplug these harness, all doors will lock then unlock themselves!

IMG_4410_Medium.jpg

  • 6 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before starting any work, we attempted to adjust the tune. However even after adjusting it to certain extremes like completely stopping fuel, it had no effect. What fixed it was removing the Nistune Board and installing the original EPROM instead. This immediately fixed the issue. Everything should have been fine with the Nistune Board installation, so I am unsure why it has caused a problem. The soldered connector is also properly soldered. This worked when I first got the 550cc injectors, before cleaning, but that may have been a coincidence.  We ended up not installing the fuel pump hanger (at least for now). So currently running stock injectors, stock fuel pump, stock fuel pump hanger – Well everything stock except the exhaust. Now I have around €1400 in Nistune, Injectors, and Hanger collecting dust for the time being, perhaps I'll install them in the future. For now I'll enjoy the car as is 😁 Thanks a lot for all your assistance, I really appreciate all the help you have given me.
    • The turbo can’t be the issue. They’re proven to make much much power than you’re making. There is something in the setup that isn’t correct. - has the exhaust got any silly step downs? - what exhaust manifold?
    • Ok, just the way you wrote it made it look like you had the stagger the wrong way around 
    • I was getting anxious with the DVLA not knowing if the paperwork is fine or not, so I rang them. No update had been given, but I  was reassured that providing the box was ticked on the V750 then the application will go through fine. I've been checking the DVLA website pretty much every day, in the hope that it would have been done. Fast forward to Monday 29th  and I was greeted with a new screen on the check, and it finally showed as Taxed and MOT'd, woohoo! The car was in desperate need of a clean, not knowing when this day was coming it was put off. As far as I was concerned I had another 3 weeks  I'm not normally one for using snow foam, but I wanted to give it another try It hasn't cleaned up too bad considering it's 21 years old and lived on a boat for a number of weeks. The personalised number plate is J2 XBK, an illegally spaced number plate would have it read J2X BK. BK could either represent  the colour black or Baker, which is my surname. I filmed the first drive, the Youtube link will be at the end. I used the same driving route I did with the 323F V6 when I had a new exhaust installed, heres a couple of photos A few more since then Youtube video can be viewed here: https://www.youtube.com/watch?v=TjkFHPzjGDw
×
×
  • Create New...