Jump to content
SAU Community

Recommended Posts

Hi guys.

i have an Axis Autec. its an 02 with cloth interior, no nav/screen.

reading a few of the older posts it refers to some of the differences etc between the RS-4 and the RX-4 and the ARX

going on Carsales there are some Axis cars badged incorrectly for example

this car advertised is clearly an Autec Axis but the wheels are missing.

Autech Axis - missing wheels

this car advertised is what you would consider an Autech Axis but is badged an ARX

ARX Autech Axis?

so i guess what im asking is did the NM35 Axis Autec come from a variety of different models or did they all start as a particular model ie, RS-4.

or could you take your Stagea no matter the model to Autech and have it modified to be an Axis.

its hard to distinguish as they all have different options etc. some with Sat Nav, some without, Some with elec Seats and some without, some with Leather some without. if you read the autech page listed in the M35 info sticky link it shows many different options.

Link to comment
https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/
Share on other sites

Hi Garett

It is a little hard to give you a straight answer to this question as you can see by the cars listed it is a little confusing.

Most Autech Axis are from the RS/RX body and they are speced up but as you said, there are many different options that could be selected. The first car you listed is definitively an Axis with ARX wheels. As cars need to be complied as a factory car it is quite possible this car had non factory wheels when it was imported and they fitted wheels they had for compliance.

The second car you listed started life as and ARX (can be determined by the interior trim) and seems to have been optioned up with and Axis body kit.

I would say you could take any car to Autech and have it fitted with special options.

Cheers

Andy

I've never seen an Axis without leather before. What colour is the cloth interior?

it's black. With a suede like charcoal in the centres, black carpet. The car is pearl white which correct me if

I'm wrong only came on autech models

Im correcting you, Mine is the same. :(

If you want to know the factory specs I can run the Vin for you, will show if anything has been modified since.

can you get me a pic of the front wheel barring assembly? Just use your Vin otherwise I have to get off my lazy arse and go downstairs to the car park!!!

Andy tried but his is F$#king useless :(

Useless you say......... Who does not know their own VIN and still can not look up FAST??? :(:D

I think you will find my image was very accurate but perhaps you description of what you wanted was errrmm.."F$#king useless"... :(:(

can you get me a pic of the front wheel barring assembly? Just use your Vin otherwise I have to get off my lazy arse and go downstairs to the car park!!!

Andy tried but his is F$#king useless :P

Useless you say......... Who does not know their own VIN and still can not look up FAST??? :D:P

I think you will find my image was very accurate but perhaps you description of what you wanted was errrmm.."F$#king useless"... :(:(

MATE! Whats your problem!!!....do you have a problem...me think's so.......I had a simple request your simple mind could not decipher! :(

I don't use PC(because I hate Microsoft OS's)....therefore I cannot use FAST.

And no I don't no my VIN# off the top of my head.....maybe I should....hey look if it really makes you happy I'll get it tattooed onto my arm.

:rofl:

P.S. sorry....i'll stop the highjack now!

Edited by Jetwreck
The second car you listed started life as and ARX (can be determined by the interior trim) and seems to have been optioned up with and Axis body kit.

I would say you could take any car to Autech and have it fitted with special options.

Cheers

Andy

Not really optioned. Axis and ARX panels are interchangeable in models up 2001-2004 (the flares match up). So all the previous owner would have to have done was buy an Axis front bar and get it and the flares pained the same colour as the body :(

Also, I believe that if you wanted Autech bits, you had to buy the Axis... Nismo can option up most models from the Nissan dealership (seems they didn't like touching the ARX though :( ), but Autech only did the complete car from what I can gather.

Not really optioned. Axis and ARX panels are interchangeable in models up 2001-2004 (the flares match up). So all the previous owner would have to have done was buy an Axis front bar and get it and the flares pained the same colour as the body :(

Also, I believe that if you wanted Autech bits, you had to buy the Axis... Nismo can option up most models from the Nissan dealership (seems they didn't like touching the ARX though :( ), but Autech only did the complete car from what I can gather.

I don't think they wanted to mess with perfection of the ARX

well mine has nismo floor mats - i know they would probably be able to be bought at every corner shop in japan. and nismo suspension. it looks as old as the car so id suggest very early fittment or factory fitted.

here are some pics.

P1000513.jpgP1000514.jpg

can you get me a pic of the front wheel barring assembly? Just use your Vin otherwise I have to get off my lazy arse and go downstairs to the car park!!!

Andy tried but his is F$#king useless :)

dude, i have the service manual!

come over and ill copy the pages you need

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • hows it fellas, my first post here which seems crazy cos half the forums i read are like the same age as me haha. to make a long story short ive got an r34 sedan (rb25de neo auto) which im swapping to a s0/s1? rb25det, r33 big box and nismo gt pro lsd. i have the motor and gearbox all bolted up outside the car, old motor and trans out. i bought the motor with stock ecu and loom, do i switch over to that? or will it be easier to get a r34 manual ecu and keep the loom if thats even possible.  also engine mounts look different, anything else thats different or incompatible? cheers, hope this all makes sense Paddy
    • att.4QNbuJlz_gNZPFBGFqeEvxSUHXkGt7z40V59MrtXTPg.mp4    
    • Plan on the day will be to park trackside. Depending on space availability we will try put a small shade tent and a few of the cars on top of the hill inside turn 3, this is an easy to get to parking area with views of Turn 2, Turn 3, Turn 4 and Turn 5 and limited other pieces of the view around the track. IMPORTANT NOTE! One consideration from previous years is from memory the trackside parking sells out before the admission tickets, for that reason I encourage anyone planning on coming to buy tickets for parking now via the official website; https://www.worldtimeattack.com/ The type of parking you are looking for is 2 Day Park & View (Access Around Venue) Vehicle Pass Only Please note this does not include admission to the event itself, remember to grab that also, and kids under 12 get in for free!
    • This is going to be a mid week evening cruise. Come along and join us for a drive out to Palm Beach. This is a change of event plans after talking to some of the older members of the club. SAU NSW is planning on hitting Old Pac again shortly, stay tuned for details. When: Thursday 26th of June Time: 7:30pm meet/8:00pm departure/10:00pm finish Meet: Spit West Car Park / Spit Rd Mosman NSW 2088 Destination: Palm Beach Public Parking / 16 Ocean Rd Palm Beach NSW 2108 Up to date information as always can be found on the events page of our website, the link for this event is https://www.saunsw.com.au/events/palm-beach-cruise There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our track days. This is an official SAUNSW event and will be run under a Motorsport Australia permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU:NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave. Thanks guys and hope to see you there!
    • Good time for a carbon roof  
×
×
  • Create New...