garetb16 Posted March 14, 2010 Share Posted March 14, 2010 Hi guys. i have an Axis Autec. its an 02 with cloth interior, no nav/screen. reading a few of the older posts it refers to some of the differences etc between the RS-4 and the RX-4 and the ARX going on Carsales there are some Axis cars badged incorrectly for example this car advertised is clearly an Autec Axis but the wheels are missing. Autech Axis - missing wheels this car advertised is what you would consider an Autech Axis but is badged an ARX ARX Autech Axis? so i guess what im asking is did the NM35 Axis Autec come from a variety of different models or did they all start as a particular model ie, RS-4. or could you take your Stagea no matter the model to Autech and have it modified to be an Axis. its hard to distinguish as they all have different options etc. some with Sat Nav, some without, Some with elec Seats and some without, some with Leather some without. if you read the autech page listed in the M35 info sticky link it shows many different options. Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/ Share on other sites More sharing options...
andy65b Posted March 14, 2010 Share Posted March 14, 2010 Hi Garett It is a little hard to give you a straight answer to this question as you can see by the cars listed it is a little confusing. Most Autech Axis are from the RS/RX body and they are speced up but as you said, there are many different options that could be selected. The first car you listed is definitively an Axis with ARX wheels. As cars need to be complied as a factory car it is quite possible this car had non factory wheels when it was imported and they fitted wheels they had for compliance. The second car you listed started life as and ARX (can be determined by the interior trim) and seems to have been optioned up with and Axis body kit. I would say you could take any car to Autech and have it fitted with special options. Cheers Andy Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5132776 Share on other sites More sharing options...
nudsy Posted March 14, 2010 Share Posted March 14, 2010 i'd have to agree with you andy, mine came with the autech bodykit, wheels, satnav, leather as well as suspension and brake upgrades. Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5132834 Share on other sites More sharing options...
mxfly Posted March 14, 2010 Share Posted March 14, 2010 I've never seen an Axis without leather before. What colour is the cloth interior? Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5132967 Share on other sites More sharing options...
garetb16 Posted March 14, 2010 Author Share Posted March 14, 2010 I've never seen an Axis without leather before. What colour is the cloth interior? it's black. With a suede like charcoal in the centres, black carpet. The car is pearl white which correct me if I'm wrong only came on autech models Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133133 Share on other sites More sharing options...
scotty nm35 Posted March 14, 2010 Share Posted March 14, 2010 Im correcting you, Mine is the same. If you want to know the factory specs I can run the Vin for you, will show if anything has been modified since. Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133157 Share on other sites More sharing options...
Jetwreck Posted March 14, 2010 Share Posted March 14, 2010 Im correcting you, Mine is the same. If you want to know the factory specs I can run the Vin for you, will show if anything has been modified since. can you get me a pic of the front wheel barring assembly? Just use your Vin otherwise I have to get off my lazy arse and go downstairs to the car park!!! Andy tried but his is F$#king useless Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133212 Share on other sites More sharing options...
andy65b Posted March 14, 2010 Share Posted March 14, 2010 Useless you say......... Who does not know their own VIN and still can not look up FAST??? I think you will find my image was very accurate but perhaps you description of what you wanted was errrmm.."F$#king useless"... can you get me a pic of the front wheel barring assembly? Just use your Vin otherwise I have to get off my lazy arse and go downstairs to the car park!!! Andy tried but his is F$#king useless Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133228 Share on other sites More sharing options...
Jetwreck Posted March 14, 2010 Share Posted March 14, 2010 (edited) Useless you say......... Who does not know their own VIN and still can not look up FAST??? I think you will find my image was very accurate but perhaps you description of what you wanted was errrmm.."F$#king useless"... MATE! Whats your problem!!!....do you have a problem...me think's so.......I had a simple request your simple mind could not decipher! I don't use PC(because I hate Microsoft OS's)....therefore I cannot use FAST. And no I don't no my VIN# off the top of my head.....maybe I should....hey look if it really makes you happy I'll get it tattooed onto my arm. P.S. sorry....i'll stop the highjack now! Edited March 14, 2010 by Jetwreck Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133236 Share on other sites More sharing options...
andy65b Posted March 14, 2010 Share Posted March 14, 2010 that might be a good idea. At least you might know it if you remember which arse cheek you tattooed it to!! LOL Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133263 Share on other sites More sharing options...
iamhe77 Posted March 14, 2010 Share Posted March 14, 2010 The second car you listed started life as and ARX (can be determined by the interior trim) and seems to have been optioned up with and Axis body kit. I would say you could take any car to Autech and have it fitted with special options. Cheers Andy Not really optioned. Axis and ARX panels are interchangeable in models up 2001-2004 (the flares match up). So all the previous owner would have to have done was buy an Axis front bar and get it and the flares pained the same colour as the body Also, I believe that if you wanted Autech bits, you had to buy the Axis... Nismo can option up most models from the Nissan dealership (seems they didn't like touching the ARX though ), but Autech only did the complete car from what I can gather. Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133331 Share on other sites More sharing options...
andy65b Posted March 14, 2010 Share Posted March 14, 2010 Not really optioned. Axis and ARX panels are interchangeable in models up 2001-2004 (the flares match up). So all the previous owner would have to have done was buy an Axis front bar and get it and the flares pained the same colour as the body Also, I believe that if you wanted Autech bits, you had to buy the Axis... Nismo can option up most models from the Nissan dealership (seems they didn't like touching the ARX though ), but Autech only did the complete car from what I can gather. I don't think they wanted to mess with perfection of the ARX Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133345 Share on other sites More sharing options...
garetb16 Posted March 14, 2010 Author Share Posted March 14, 2010 well mine has nismo floor mats - i know they would probably be able to be bought at every corner shop in japan. and nismo suspension. it looks as old as the car so id suggest very early fittment or factory fitted. here are some pics. Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5133364 Share on other sites More sharing options...
zei20l Posted March 15, 2010 Share Posted March 15, 2010 can you get me a pic of the front wheel barring assembly? Just use your Vin otherwise I have to get off my lazy arse and go downstairs to the car park!!! Andy tried but his is F$#king useless dude, i have the service manual! come over and ill copy the pages you need Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5134414 Share on other sites More sharing options...
scotty nm35 Posted March 15, 2010 Share Posted March 15, 2010 dude, i have the service manual!come over and ill copy the pages you need Is that an open invitation? Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5134448 Share on other sites More sharing options...
iamhe77 Posted March 15, 2010 Share Posted March 15, 2010 dude, i have the service manual!come over and ill copy the pages you need ... still waiting for the PDF (when you have time of course ) Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5135222 Share on other sites More sharing options...
zei20l Posted March 15, 2010 Share Posted March 15, 2010 no that was to craig, but yes ill be scanning it (slowly) and selling copies. or maybe trading them for parts Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5135291 Share on other sites More sharing options...
iamhe77 Posted March 16, 2010 Share Posted March 16, 2010 no that was to craig Yep, I know but yes ill be scanning it (slowly) and selling copies. or maybe trading them for parts that's what I was referring to Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5135313 Share on other sites More sharing options...
zei20l Posted March 16, 2010 Share Posted March 16, 2010 that answer was to scotty mate Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5135378 Share on other sites More sharing options...
iamhe77 Posted March 16, 2010 Share Posted March 16, 2010 (edited) that answer was to scotty mate Smartarse... but I was actually referencing your "will scan some copies" statement from last year. Edited March 16, 2010 by iamhe77 Link to comment https://www.sau.com.au/forums/topic/311905-nm35-autec-axis-rs-4-rx-4-arx/#findComment-5135390 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now