Jump to content
SAU Community

Recommended Posts

This is f**king hot...

I guess that front bar's pretty rare?

that is hot but is not a masasports one might be custom

WTF dude? We know its not a masasports one...Its Nismo!

are you talking about the front bar or bonnet , so you reckon thats a nismo bonnet then ?

im talking about the bonnet

if so please post a link to that bonnet on a nismo site .......

At no point did you mention the bonnet when you were lamenting about how hot it looks, Dust.

So again, just to summarise for yourself (As everyone else is alreayd on the same page)

Front bar = Nismo

Bonnet = Masasports

Bonnet MAY be the now defunct Dolphin item.

I have emailed RHD for a clear picture of the NM35 and PM35 Masa bonnet and will post here if I receive said pic.

I assumed the Masa image on RHD was a stock image; they say they stock bonnets for a bunch of models - so I figured the venting pattern may well be different for the Stag compared ot the image.

Now that you mention Dolphin, I do recall seeing one on their site - but yeah, that was discontinued yeaaaaaars ago :(

I assumed the Masa image on RHD was a stock image; they say they stock bonnets for a bunch of models - so I figured the venting pattern may well be different for the Stag compared ot the image.

Now that you mention Dolphin, I do recall seeing one on their site - but yeah, that was discontinued yeaaaaaars ago :(

Yep same, which is why I requested a picture of the NM and PM bonnets.

The rims are 19x8.5 +22 Enkie GTC01

But thats too skinny, I ordered them online before anyone had done any real experimenting and wanted to be safe. We have worked out with my brothers M35 that 9.5 +35/30 is the ideal fitment - no scrubbing and no rolling necessary.

Although if I were to do it all again I would probably to a little flair/roll and run 9.5 +22

Its only the fronts that are an issue, you can easily fit 11" on the back! haha

What rubber did you end up getting?

I'm ordering wheels, same specs as yours (different brand). Thinking a 235/40-19 would fit the best. Thoughts?

What rubber did you end up getting?

I'm ordering wheels, same specs as yours (different brand). Thinking a 235/40-19 would fit the best. Thoughts?

Check http://www.1010tires.com/TireSizeCalculator.asp

235 is a rare width I think.

245 is more common.

yeah 225 and 245 are more common. I remember the Tyre guy telling me that the only car they can think of with 235 was the M3 so there arent any cheap options.

245 looks a bit big on 8.5J

Here is another pic of the tyre and fitment.

_MG_7823.jpg

_MG_7824.jpg

At no point did you mention the bonnet when you were lamenting about how hot it looks, Dust.

So again, just to summarise for yourself (As everyone else is alreayd on the same page)

Front bar = Nismo

Bonnet = Masasports

ye but bonnet = masasport isnt on there website they just have the twin vented bonnet

yeah 225 and 245 are more common. I remember the Tyre guy telling me that the only car they can think of with 235 was the M3 so there arent any cheap options.

245 looks a bit big on 8.5J

Here is another pic of the tyre and fitment.

_MG_7823.jpg

_MG_7824.jpg

the blue stag seems to be a rare colour compared to all the other colours they come in

mine is identicle colour and body style as this but with a nice wing and nsimo wedin i think its called exhaust

also undecided to black the headlights out

as the black loks awsome on the stagea expecially on the silver or white cars

yet with the blue colour im not sure as you need oposing colours light and dark so darker car means maybe keep silver lights to macth grill , still not sure

Bonnet MAY be the now defunct Dolphin item.

I have emailed RHD for a clear picture of the NM35 and PM35 Masa bonnet and will post here if I receive said pic.

Cam - you are correct. Bonnet is a very rare Freeway - Dolphin item. If anyone finds one - i'll take it!!

http://www.freeway-dolphin.co.jp/aeroform/stagea/nissan_stagea_m35st.htm

Scroll down and there is a small picture of it.

ye but bonnet = masasport isnt on there website they just have the twin vented bonnet

As above. Bonnet is Dolphin...

Ive watched YAJ for over a year now; havent seen one come up yet.. and I'll be bidding on it rather than palming it off sorry mate :P

Might make some enquiries... :whistling: Would hate to start a bdding war when one comes up....

Love the Dolphin stuff!!

Presuming this thread is simply a gallery of M35's

Was sent these by a friend in Japan.

SLAMMED!!!!! >_<

post-12229-0-37119600-1303254966_thumb.jpg

post-12229-0-71615100-1303254982_thumb.jpg

how are these guys running different widths?

I thought everything goes to shit for the 4wd.

how are these guys running different widths?

I thought everything goes to shit for the 4wd.

What makes you think that its an NM35? Doesn't look like the guy was really after performance over stance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...