Jump to content
SAU Community

Recommended Posts

This is f**king hot...

I guess that front bar's pretty rare?

that is hot but is not a masasports one might be custom

WTF dude? We know its not a masasports one...Its Nismo!

are you talking about the front bar or bonnet , so you reckon thats a nismo bonnet then ?

im talking about the bonnet

if so please post a link to that bonnet on a nismo site .......

At no point did you mention the bonnet when you were lamenting about how hot it looks, Dust.

So again, just to summarise for yourself (As everyone else is alreayd on the same page)

Front bar = Nismo

Bonnet = Masasports

Bonnet MAY be the now defunct Dolphin item.

I have emailed RHD for a clear picture of the NM35 and PM35 Masa bonnet and will post here if I receive said pic.

I assumed the Masa image on RHD was a stock image; they say they stock bonnets for a bunch of models - so I figured the venting pattern may well be different for the Stag compared ot the image.

Now that you mention Dolphin, I do recall seeing one on their site - but yeah, that was discontinued yeaaaaaars ago :(

I assumed the Masa image on RHD was a stock image; they say they stock bonnets for a bunch of models - so I figured the venting pattern may well be different for the Stag compared ot the image.

Now that you mention Dolphin, I do recall seeing one on their site - but yeah, that was discontinued yeaaaaaars ago :(

Yep same, which is why I requested a picture of the NM and PM bonnets.

The rims are 19x8.5 +22 Enkie GTC01

But thats too skinny, I ordered them online before anyone had done any real experimenting and wanted to be safe. We have worked out with my brothers M35 that 9.5 +35/30 is the ideal fitment - no scrubbing and no rolling necessary.

Although if I were to do it all again I would probably to a little flair/roll and run 9.5 +22

Its only the fronts that are an issue, you can easily fit 11" on the back! haha

What rubber did you end up getting?

I'm ordering wheels, same specs as yours (different brand). Thinking a 235/40-19 would fit the best. Thoughts?

What rubber did you end up getting?

I'm ordering wheels, same specs as yours (different brand). Thinking a 235/40-19 would fit the best. Thoughts?

Check http://www.1010tires.com/TireSizeCalculator.asp

235 is a rare width I think.

245 is more common.

yeah 225 and 245 are more common. I remember the Tyre guy telling me that the only car they can think of with 235 was the M3 so there arent any cheap options.

245 looks a bit big on 8.5J

Here is another pic of the tyre and fitment.

_MG_7823.jpg

_MG_7824.jpg

At no point did you mention the bonnet when you were lamenting about how hot it looks, Dust.

So again, just to summarise for yourself (As everyone else is alreayd on the same page)

Front bar = Nismo

Bonnet = Masasports

ye but bonnet = masasport isnt on there website they just have the twin vented bonnet

yeah 225 and 245 are more common. I remember the Tyre guy telling me that the only car they can think of with 235 was the M3 so there arent any cheap options.

245 looks a bit big on 8.5J

Here is another pic of the tyre and fitment.

_MG_7823.jpg

_MG_7824.jpg

the blue stag seems to be a rare colour compared to all the other colours they come in

mine is identicle colour and body style as this but with a nice wing and nsimo wedin i think its called exhaust

also undecided to black the headlights out

as the black loks awsome on the stagea expecially on the silver or white cars

yet with the blue colour im not sure as you need oposing colours light and dark so darker car means maybe keep silver lights to macth grill , still not sure

Bonnet MAY be the now defunct Dolphin item.

I have emailed RHD for a clear picture of the NM35 and PM35 Masa bonnet and will post here if I receive said pic.

Cam - you are correct. Bonnet is a very rare Freeway - Dolphin item. If anyone finds one - i'll take it!!

http://www.freeway-dolphin.co.jp/aeroform/stagea/nissan_stagea_m35st.htm

Scroll down and there is a small picture of it.

ye but bonnet = masasport isnt on there website they just have the twin vented bonnet

As above. Bonnet is Dolphin...

Ive watched YAJ for over a year now; havent seen one come up yet.. and I'll be bidding on it rather than palming it off sorry mate :P

Might make some enquiries... :whistling: Would hate to start a bdding war when one comes up....

Love the Dolphin stuff!!

Presuming this thread is simply a gallery of M35's

Was sent these by a friend in Japan.

SLAMMED!!!!! >_<

post-12229-0-37119600-1303254966_thumb.jpg

post-12229-0-71615100-1303254982_thumb.jpg

how are these guys running different widths?

I thought everything goes to shit for the 4wd.

how are these guys running different widths?

I thought everything goes to shit for the 4wd.

What makes you think that its an NM35? Doesn't look like the guy was really after performance over stance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Update Got turbo back from hypergear, installed everything etc. Bled coolant, wasn't smoking so I thought beauty she's sorted now. Went on a drive, car up to temp, let it idle for about 15 seconds, gave it some gas...nice puff of smoke again. Fml No doubt my turbo was pretty worn anyway but nonetheless frustrating that the problem persists.
    • Lol, yeh sure. But I'm not changing the head on this engine. Turbo is the current mod im looking at; as the VCT-2.6L  engine im building is getting the turbo setup i posted so the old built RB25DE needs a snail
    • New setup just needs a VCT enabled head and it will come on so much earlier. At least 500rpm of added response, if not more.
    • Wow, there's a user name I haven't seen for a while! Good to see you back @Sydneykid
    • Something to note, on an aftermarket BOV, it's quite possible to end up with the worst of both worlds, where on light throttle, there isn't enough force to open the BOV so you get small reversion and driveability issues, and with the venting to atmosphere, it dumps a lot of fuel on shifts. Realistically, dumping to atmosphere under power isn't a major driveability issues, compared to the issues of stalling from reversion. If you're getting up the throttle, then putting the clutch in, say on a shift up, but then don't release the clutch, yes, the engine can and will stall, but, just drive around it, and that's easy, let the clutch out in the next gear and the car rolling will keep it all running / going.who wants a hard hit of throttle and then to just let the motor idle anyway?   Main issue for driveability is blipping throttle and it wanting to stall, like when parking or trying to move in slow traffic.
×
×
  • Create New...