Jump to content
SAU Community

Recommended Posts

hey guys not sure if this is the right place to post this but i have recently picked up my R34 GTT with very minor modifications to the engine and for some reason for the past 3 days in a row as i am driving or stopped at traffic lights it has seems to stall...

at first i thought typical RB (random bullshit) ;)

but now im not sure. i know the batt is on its way out but i didnt think that could make it do this??

it on has a KN air filter on it and thats about it...

any help or ideas or if this has happen to anyone else please let me know.

thanks heaps in advance for any advice :)

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/
Share on other sites

Do you have an aftermarket atmospheric blow off valve? Put the stock one back on and your problem is fixed.

Or try cleaning the AAC(Auxiliary Air Control) valve... it bypasses some air through when your foot is off the throttle.

And maybe clean your air flow meter with some electrical contact cleaner.

There is a tutorial on how to clean the AAC valve in the DIY section of the forum, just search.

Edited by SKYRYAN
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5159213
Share on other sites

How do you know the battery is on it's way out? Could be the alternator...

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :D

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160944
Share on other sites

Could also be a bad earth..

My stag was having trouble starting in the mornings and would randomly cut out or stall at lights, thought the alternator was dying.. turned out it was one of the earth leads back to the battery, the wingnut that was holding it onto the clamp was loose :(

Very true.

If the battery is dying that could well be a symptom. Check the battery and alternator with a multimeter, make sure you aren't missing any volts between the alternator and the battery. If there are more volts at the alternator then there are at the battery, check your earth and positive wiring, could be a bad connection or corrosion.

Alternator should be producing 14.2v while charging

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5160976
Share on other sites

^^^ thanks for your thoughts, my fiance got home last night and the batt terminal for the power was corroded, so he cleaned it up and it found to be loose so that would explain things. it hasnt missed a beat today which is great :(

as for the wheels they came with the car, dont worry in the future there will be some jap rims on there :D

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5161274
Share on other sites

well here is an update. it was fine for nearly 2 days because he cleaned the terminals and tightly sercured the terminal as it was a little loose after getting rid of the corrosion and then last night as we were going for a drive it happened AGAIN :(

we were travelling at 60 in 5th in a residential area and then all of a sudden the car lost a little bit of power and the slip light came on.... but it was only that light!! it was weird cause we have already been driving for at least 1 or 2 hours...

any light in this would be great, now i know the batt is still not the best but thats getting replaced next week.

thanks guys :P

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163318
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5163437
Share on other sites

Take it to a specialist garage. If the slip light is coming on but you aren't breaking any traction then you could have error codes. They can run a scan for you and find out.

Oh and at least put stock GT-T wheels on instead of those massive heavy abortion bling things hanging off your nice car.

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Edited by dose_it
Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164629
Share on other sites

stop hatin the chicks wheels. she might like them get the f**k over it! or do u need another beating at a set of lights?

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164816
Share on other sites

Haha ooh big threat alert Ladies and Gentlemen! Because you driving someone elses built car is going to settle it? Or do you need a life rather than spending nights at traffic lights...?

Muppet.

I'm a muppet am I? Who cares If someone built my car it's a cefiro good luck findin a stock one and I'd hardly call it built when it's got a 250 horse sr20 coilovers and a bodykit that just manages to chirp 3rd. Ha yep that's it I just spend hours cruising from lights to lights hoping to race standard skylines I was honestly to busy perving on ur ex missus.

But seriously who cares if she has chrome wheels. Ur the only person who can relate a stall problem to rims so maybe in reality your the muppet

Link to comment
https://www.sau.com.au/forums/topic/314481-help-with-r34/#findComment-5164852
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not wrong but 5W30 at 100C is like 10 cSt vs 25 cSt for 10W60. If we think in terms of viscosity margin 10W60 will probably still be ok at 130C but 5W30 is probably too little. It's absolutely shocking how hot the oil gets in something like a stock FL5 from only ~3 minutes of use on the Nordschleife. I would not risk taking a car like that to anything remotely intense without a ton of work done for cooling. Heat shielding on the manifold/turbo/downpipe, oil coolers, etc. 
    • I think the concept is highlighting the various scenarios where thicker oil helps, and thicker oil potentially doesn't help and only generates heat and costs power, in turn for safety which isn't actually any safer (unless you're going real hot). If anything this does highlight why throwing Castrol 10w-60 for your track days is always a solid, safe bet. 
    • Jason should have shown a real viscosity vs temp chart. All the grades have very little viscosity difference at full operating temperature.
    • Oops... I meant to include the connector  view... BR/W - power from fuse L/W - motor negative to fan control amp (and off to HVAC pin19) OR/B - PWM signal (from HVAC pin20) B --  ground  
    • Yep, if you are applying filler it sounds like there is something wrong with the body lol. Safe to assume there is going to be a lot of sanding going on if your still applying fillers.  Picture a perfect bare metal panel, smooth as glass. You lay down your primer, it's perfect. (why are you going to sand it?) You lay down the colour and clear, it's perfect. No sanding at all took place and you've got a perfectly finished panel.  You won't be chasing your tail, sounds like you were prepping to start laying filler. If your happy with the body after the sanding, there is some bare metal exposed and some areas with primer, no issues at all, start laying the filler. You are safe to lay filler on bare metal or primer (of course check your technical data sheet as usual for what your filler is happy to adhere to).  This isn't a 100% correct statement. There is primer that is happy to adhere to smooth bare metal. There are fillers that are happy to adhere to smooth bare metal. Just make sure you're using the right materials for the job.  Typically if you are using filler, you would go primer, colour and clear. I've never seen any instances before where someone has laid colour over body filler (maybe this happens, but I haven't seen it before). So your plan sounds pretty normal to me. 
×
×
  • Create New...