Jump to content
SAU Community

Recommended Posts

yo peeps

my mates RB25 (s2) is all of a sudden making a funny noise kinda sounds like a bearing

it was fine like a week ago, hasnt been driven.. now all of a sudden this noise

tried unplugging vvt but that didnt fix it, it feels like its coming from under the rocker cover

the engine is stock, unopened etc

<object width="480" height="385"><param name="movie" value="<A href='

name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="<A href="
type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>
Link to comment
https://www.sau.com.au/forums/topic/314501-rb25-making-funny-bearing-noise/
Share on other sites

take it to a mech. asap! i wish i had gone to see one earlier. i started hearing a similar noise, took it to my mech, turns out harmonic balancer had come loose... left it too long and had damaged my crank :D

hopefully this isnt your problem.

-trel

This is screwed... i have just changed the spark plugs... but i took it for a few drives and it never made any noise..

Then a couple days before i moved overseas i started the engine and it was fine no noises at all..... so i dno how a noise like that could suddenly come up?

worst of all is i now like in U.A.E and im trying to get rid of the car soon as possible.....

Could be valve guides in the head. :worship:

i dont see how the valve guides could make that noise?... i dont think its the valves themselves because i bent valves and it make a different sound to that..... so i dont think its bent valves.

if valve guide were stuffed... then oil would be getting into the cylinders and there would be smoke coming out the exhaust?

I hope it could just be the water pump?

otherwise what sort of bearings are in the head?

Idler pulley bro.

It sounds SO much worse than it is though huh? I crapped myself when mine started doing it. But with mine it went away after the car warmed up.

Check out my vid:

Same noise more or less. I changed my belts/idler/tensioner, goneburger :P

Idler pulley bro.

It sounds SO much worse than it is though huh? I crapped myself when mine started doing it. But with mine it went away after the car warmed up.

Check out my vid:

Same noise more or less. I changed my belts/idler/tensioner, goneburger :P

thanks for that man very helpful! i will get a gates kit and replace everything, its due for it anyway

let you guys know the results

if your not sure take it to a mechanic that is..... to me it sounds like it may be a few different things so best to take it to someone that can u tell u for sure and pinpoint the problem before it gets worse....

could me your lifters if u say it started doing it after sitting there for alittle while.

if your not sure take it to a mechanic that is..... to me it sounds like it may be a few different things so best to take it to someone that can u tell u for sure and pinpoint the problem before it gets worse....

could me your lifters if u say it started doing it after sitting there for alittle while.

the timing belt is due anyway so doesnt bother me or the owner to change it, he's giving me $100 to do it anyway :D

its not the lifters i know what they sound like

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Power steering is probably because someone has nuked the HICAS CU and you no longer have the variable power asist doing what it is supposed to. How much boost are you running? You are aware that any more than 10 psi on the stock ECU is just asking for it to go to full R&R (that's Rich & Retard, which is effectively Retarded and Retarded!) which kills all the power. Depending on the exact conditions, it can just be runnign on the fat and stupid end of the maps, then the conditions change, you make a little more boost and the ECU goes into panic.
    • @BuiltNotBought Just as GTSboy said.   If you want driveabilty and more low down torque..keep the stock runners. They are VERY good from a factory. I have them too on my RB25DET NEO and as a GTSboy i have fmic but with stock piping route(i have Blitz intercooler) Iam making around 320 BHP and the car pulls "hard" from like 2,5k all the way to 7k. I have it dyno tuned to mimic N/A power curve and making little less max torque due to the smallbox tranny. But driveability is very great. I had 350Nm below 3k so car feels very quick.   EDIT:  Not my channel but i saw this and i know that is what i want (and i have exactly this)  
    • Looking to sort out a couple of issues on my skyline  It recently was rebuilt, however rebuilder long story short did not give two flying effs about the work he did. So moving forward it's running but I have two persistent issues 1) it has a misfire / lag type of issue (was at higher RPMs but I had a dead piggy back ecu removed which improved it) now it's not as bad but still does it at random, I thought it may have been a boost issue I'm running an older turbosmart dual stage controller, turbosmart told me to try running off gate pressure however it still has a lag at random times. It has New MAF, maf plug, coil packs, sparks, CP harness.. injectors tested and cleaned. Factory ECU. 2) Power steering issue. It is tight as anything. Flushed power steering, rebuilt my pump because the bearing was shot. Flushed again still tight (mainly when parking and going slow into my driveway etc)  No kinks in hard lines, replaced the lines I could see had cracks. Still tough to steer.  I was told to shim a coin and place into the solenoid plug? Is there anything else. My steering angle sensor also has a issue. It's a used one I replaced, does it need to be calibrated? I feel like I've tried everything and this car is my voodoo doll.   
    • Holy shit... wow!!! I totally missed this
    • One main filter. Each tank has a prefilter to keep rocks and small children out, then the big main filter that also does water separation. Clogged the first one so bad it was like a rev limiter at 3200rpm. Literally just like dropping the throttle off and maintaining rpm!
×
×
  • Create New...