Jump to content
SAU Community

Recommended Posts

Hiya,

Currently there is an Interclub supersprint series running in NSW between 4 cars clubs SSCC,WRX,HSV & Aroca.

Come join the fun and mingle with a whole range of different cars

You need a minimum CAMS L2s Licence to run and a good attitude.The car needs to be equiped with the normal track day/supersprint requirements..I.E Fire Extinguisher..check the sup regs for more info

We also now use Dorian Timing. It is a more accurate way of timing and you can hire them from us for the day.

Its $200 with the Dorain Timing Hire.. You must Hire one or you wont be able to be timed.

Please see the attached forms.

The Colour Groups are:

Green

Yellow

Blue

White

If you have any questions please dont hesitate to ask!

Jessica Nicholson

Secretary

Southern Sporting Car Club

Eastern_Creek_18_April_Entry_Form.pdf

Eastern_Creek_Sup_Regs_18_April__3_.pdf

Link to comment
https://www.sau.com.au/forums/topic/314818-interclub-supersprint/
Share on other sites

  • Replies 67
  • Created
  • Last Reply

Top Posters In This Topic

a month? thats nuts for a driveway man - and i used to make them. You should be able to drive over them in under a week!

i dont have a cams licence, but would like to get one so i can come to this. What do I need to do to get one and how much does it cost?

Ah! GD2ILA is trapped in my Garage while I get my driveway fixed. I won't be able to drive across the new concrete for a month.

Bugger! This sound like a great event.

Go SAU!

Take your wife's MX-5. I'm sure she won't mind :D

Take your wife's MX-5. I'm sure she won't mind :)

hmmm... Honey I just need to run a few errands, can I borrow your car?

Well might be fun at Wakefield but not going to be as fun at EC in a bone stock MX5 vs. GD2ILA.

Jez you need to obtain a L2s licence..go to the cams website and download the form fill it out and send them the money..tear off the 30day licence on the back page and bring it with you on the day! Please read the sup regs so you what is required in the car..You must also be a member of an affiliated Cams car club like SAU..

Yes Gunnar its been open up to other CAMS car clubs

Pez thats a crack up..Not fair have to wait a whole month..I would go crazy lol

hope to see some of you out there

I wont be there :laugh: at this rate I have no idea when I'll be back out there.

Pez - you'll be suprised how the '5 will go out there! I beat quite alot of other cars in my nugget when it worked!

well, ok busted on dis'n the 5.

But Wifey says no, I'm not allowed to take her car above 6k revs to keep it nice and toight like a tiger.

All the MX-5s I have been in redline at 6500 rpm so a limit of 6000 doesn't sound unreasonable :(

whats doing there brus, are you married yet ? once the formalities are over you should be back on the track. :(

let me know if you need me to build that engine, ill do it on the side at work..........cheeeeep. but good lol.

I wont be there :) at this rate I have no idea when I'll be back out there.

Pez - you'll be suprised how the '5 will go out there! I beat quite alot of other cars in my nugget when it worked!

Jez you need to obtain a L2s licence..go to the cams website and download the form fill it out and send them the money..tear off the 30day licence on the back page and bring it with you on the day! Please read the sup regs so you what is required in the car..You must also be a member of an affiliated Cams car club like SAU..

Yes Gunnar its been open up to other CAMS car clubs

Pez thats a crack up..Not fair have to wait a whole month..I would go crazy lol

hope to see some of you out there

OK thanks - I'm already entered through the wrx club but good to know I can get mates with CAMS licences in there. The club was not 100% sure if it had been opened to everyone.

I sent away to be a member of SAU around 2 weeks ago, So i can get my cams lic, I havnt got my Lic back from CAMS yet and i havnt got my SAU card and info yet ether, is there anyway i can do this trackday? I have tryed to do it all right its just the paper work thats stoping me, i do have the pink slip off the bottom on the CAMS paperwork and i got Nick from SAU to sign it for me last thursday nite. Can anyone help me out????

i dont want to enter and lose 200bux

cheers

Deano : )




  • Latest Posts

    • sold listed as a Tomei LSD 1.5 Way For 1998+ Nissan Skyline ER34 25GT RB25DE w/Open R200 https://www.ebay.com/itm/174006114594?campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=&mkrid=711-53200-19255-0&loc_physical_ms=108689&loc_interest_ms=&campid=5338967980&mkevt=1&mkcid=1&toolid=10050&customid=71883f2ccc571356e0a757bc7adfdde2&mkrid=710-53481-19255-0&loc_physical_ms=108689&loc_interest_ms= it went in like butter all gears, alignment, back lash etc, rotation and clearances correct, and if rolling all rotates smooth and free when coasting down road , clutch in or out over 10 mph smooth... its the binding, clunking and jerking from a stop that is most concerning, also seems like its going to tear the tires off in 10 miles of normal road driving. 
    • What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...