Jump to content
SAU Community

Recommended Posts

Hello boys, i have finally saved the money for a R33 GTR.

So i would just like to ask someone who owns or has previously owned an R33 GTR, and that could tell me what i should know when buying and when owning one, such as costs of maintaining it etc etc?

The GTR i get, ill be pumping it to 270-300KWs so it will have just light mods, exhaust and boost, keeping it street legal so police cant defect me.

Link to comment
https://www.sau.com.au/forums/topic/316301-owning-a-r33-gtr/
Share on other sites

Well first off, you won't make 300RWKW with just light mods, although given you have money for a GTR perhaps they would be classed as light money wise :D

The GTR only really differs in the engine compartment, most of the rest of it uses similar/same specced parts (read: same price to fix when broken), so it is really only the engine bay you have to worry about.

I've never owned, but considering the high similarity for engine components there shouldn't be much difference to a 33GTST or 32/34GTR for that matter.

Basically, you can abuse the engine and other parts more, but they will be 20-50% more expensive to fix if you break, mostly in parts cost, somewhat in labor (RB26DETT is a bit more time consuming to work with, dual turbos etc).

the whole drivetrain is different and so are the brakes and panels. getting it serviced will cost more than a gts-t, also tyres will be more expensive because they run fatter rubber. in my opinion everything about a gtr is more expensive than a gt-t or gts-t. forgot to add r33 and r33 gtr has the same gearbox but the r34 gtr is different.

Million dollar question... If you found something thats in very good condition, why would you be spending more? If something did break, of course it'll be more exp than a single turbo car. This applies to any twins. I dont have any issue with my 33gtr at all since buying it 1 year ago and running 250awkw now. You wouldnt be pushing 300awkw with stock gtr turbos at all. You'll be looking at 250awkw.

As BNCR33 said, changing turbos is an expensive process. GT-SS will be around 3.5k, dumps will be 500 and labour will be easily 1k. Thats 5k all up excluding your ecu, boost controller etc...

Maintenance wise it'll be the same as any other AWD cars if its mechanically A1.

300kw is piss easy in a gtr, as you say light mods.

I spend about $8K a year on mine all up (incl rego, insurance, fuel and everything else), but i'm always doing extra stuff to it. This year will be more like $12k due to turbo replacement...

My recipe for 300kw is;

Less than $2.6K for turbos (2860-7s)

$500 for seimens injectors

$400 for Nistune

$340 for modified xforce dumps (car already had dump back)

$850 for CRD tune (other places would be less)

Around $1K for labour

I'd do the turbos (and dumps if ever going to do them) straight away after getting the car. All the other stuff can wait.

I dont call fitting new turbo's light mods. To the OP, if you buy a GTR that is in good cond it wont cost you very much at all weekly wise. I budget $150 a week . That inc everything. And its my daily ride too. Look after it and it will look after you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Nice, thanks for sharing your progress....that's a pretty long list you are putting into it!
    • Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
×
×
  • Create New...