Jump to content
SAU Community

Sti 22b

Kujotk

By Kujotk,
in General Automotive Discussion

 Share

Recommended Posts

Kujotk Grand Master

Kujotk

Posted
  • Author
Posted

dont get me started on just jap birds, if they don't like the way you look, the price goes up 10%.

Also i bought split fires from them, a whole box, through the window of the box it looked like there were six coils in there, 2 minutes after i left i stopped at a maccas around the corner from them and decided to open it up and there were only 5, and the 5 were used. after 30 minutes one of the guys there admitts he didnt check the box and regurlarly they get returns or sell individual coils where there may only be 5 coils in a box instead of six.

I boycot them ever since, imagine if you ordered it online, there goes $600.

I send for japan now anyway, everything is cheaper and never had a prob

Link to comment
https://www.sau.com.au/forums/topic/316303-sti-22b/page/2/#findComment-5177854
Share on other sites
mad082 Grand Master

mad082

Posted
Posted
dont get me started on just jap birds, if they don't like the way you look, the price goes up 10%.

Also i bought split fires from them, a whole box, through the window of the box it looked like there were six coils in there, 2 minutes after i left i stopped at a maccas around the corner from them and decided to open it up and there were only 5, and the 5 were used. after 30 minutes one of the guys there admitts he didnt check the box and regurlarly they get returns or sell individual coils where there may only be 5 coils in a box instead of six.

I boycot them ever since, imagine if you ordered it online, there goes $600.

I send for japan now anyway, everything is cheaper and never had a prob

ahahaha, ask munkyboy about the problems he has had with them

Link to comment
https://www.sau.com.au/forums/topic/316303-sti-22b/page/2/#findComment-5181504
Share on other sites
Kujotk Grand Master

Kujotk

Posted
  • Author
Posted
potential new car Kujotk?

Funny you should say that Nick, I actually picked up a new one yesterday and now my other cars are wasteing away in the driveway being destroyed by the elements.

PM me and i'll send you the link with some pics of it, lets just say comprehensive insurance is $6k/year and shannons/dawes ect... wouldnt touch me because i'm under 30 years old.

Edward lee has the worst rep for imports on Parramatta road (and thats pretty fkn bad).

Link to comment
https://www.sau.com.au/forums/topic/316303-sti-22b/page/2/#findComment-5182257
Share on other sites
  • 2 weeks later...
Gunnar_11 Enthusiast

Gunnar_11

Posted
Posted
From reliable sources around 4-6 were officially bought in the country by Subaru Australia. Subaru kept one and put the others for sale. Though I have personally seen 4+ private imported 22B's. Yes you are correct. 400 were made along with 3 prototypes numbered "000". The prototypes were given to David Lapworth, Colin McRae and Nicky Grist. From memory they made a extra 50 "Type UK" 22B which were only sold in Great Britain.

Where abouts do you live? You are lucky to spot a 22B is Australia. I personally have only seen 2 in the flesh (Both being at dealerships). I know of an owner who lives up near Woy Woy, Sydney.

Its hard to tell if its a Japanese or Australia delievered because 400 were made from 1998-1999. All of the 400 cars were sold in 48 Hours.You also mention it sounded better, potentially beacause the 22B had a unique 2.2L boxer engine rather than the usual 2.0L. It was the first Subaru to have a Intercooler water-spray button, adjustable rear wing and a changable Diff. Doesnt sound like much now but back in the late 90's these were very well above the current technology.

The 22B didn't have a radio, airbag or even ABS (IC waterspray taking up the space where the ABS was). Though it did have Blistein supension, STi struts, BBS Elektra wheels and a WRC-Spec wide body kit.

I don't think they were that high - I think it was only 3-4 Aust delivered ones. Most of the ones that are here are private imports

Link to comment
https://www.sau.com.au/forums/topic/316303-sti-22b/page/2/#findComment-5200644
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Latest Posts

    • PranK
      2001 R34DE

      By PranK · Posted

      R34DE as in R34 with an RB25DE? So did you get this? Or you planning to?  I'm not really sure what you're saying. 
    • Dose Pipe Sutututu
      What should I do next to hold the head on

      By Dose Pipe Sutututu · Posted

      Possibly avoid using a Cometic one unless the deck/head surface are perfectly flat. I did have a look just then and forgiving gaskets such as Tomei or Nitto don't exist for the FJ20, however the Bar-Tek or Kameari ones look good and might do the trick.
    • GTSBoy
      boost source Size Garrett gt28 gen2

      By GTSBoy · Posted

      Because pipe threads for pipe things. M threads for bolt things. Throw some teflon sealant onto it and dust your hands off knowing you did the right thing, instead of going twice around the block to achieve a result using the wrong things. Of course, all of these solutions are ignoring the fact that the minimum thread pitch we're talking about here is 1.25mm, with the 1/4" in NPT or BPS being out around 1.4mm. You will need to know that the boss you're tapping has enough thickness for at least a few threads. That's one of the reasons that 1/8" is commonly used - because the pitch is <1mm. And why would you look to use 1/4" NPT in a BSP country anyway? Ugh.
    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
×
×
  • Create New...