Jump to content
SAU Community

Who In Vic Has Motorbikes Post Up What You Got!

ylwgtr2

By ylwgtr2,
in Victoria

 Share

Recommended Posts

ylwgtr2 Grand Master

ylwgtr2

Posted
Posted

a recent thread shows me we have a few bike people here and has prompted me to start this one to see who has what type of bikes...i will kick off with some of the things ive collected over the years.

This one is a honda ATC250RF fitted standard with a CR250 engine

gallery_2711_155_37422.jpg

This one is a yamaha TRI-Z fitted standard with a YZ250 engine

gallery_2711_155_12759.jpg

This is my CR500E motard with RVF400 single arm(not finished yet)

gallery_2711_155_24649.jpg

RGV250 Fitted with RG500 engine(not finished yet again!)

gallery_2711_155_57335.jpg

gallery_2711_155_57335.jpg

CRF450X 2009 fitted with CR500 engine (almost finished!)

gallery_2711_155_260883.jpg

gallery_2711_155_50330.jpg

LT500 twostroke quadzilla

gallery_2711_155_16972.jpg

RG500

gallery_2711_155_41200.jpg

TDR250 this thing it fkn cool and fast!

gallery_2711_155_31639.jpg

This poor old thing is as rare as and needs a restoration(one day)...its a KXT250 factory fitted with a KX250 engine

gallery_2711_155_128814.jpg

Ive got more maybe i post some later :(

Priestley Rising Star

Priestley

Posted
Posted (edited)

You've got some f**king dangerous bikes there! 3 wheelers are a good way to die :(

Like the RG500. Did you import it from Japan or buy it here? I was the test rider dummy for an RG500 that we got from Japan a few years back... Didn't die, so it was all good.

More info/pics on the CR500 please :( Also, MC28 fairings on an RGV? Looks like they fit pretty well.

At the moment I only have a 1981 XR200. Previous bikes were a CR80, YZ100, KX125, CBX250, 2XCBR250s, another CR80, TS250X and a VFR400.

post-4688-1271468048_thumb.jpg

Edited by Priestley
ylwgtr2 Grand Master

ylwgtr2

Posted
  • Author
Posted (edited)

gallery_2711_155_28041.jpg

i posted the same pic of the rgv/rg500 hybrid twice...this is the other one i meant to post

its not finished aswell :)You want more info on the motard 500 or the dirt one?Th RG500 is an aus delivered one that pretty much sits under covers on top of the spray booth,i break the old cnt out every now and then...its one people love thats for sure...

Edited by ylwgtr2
Cowboy1600 Grand Master

Cowboy1600

Posted
Posted
All this talk of motorbikes has got me wanting one. Badly lol.

This is what I want. '09 Kawasaki ZX-6R.

I think they go for about 15kish brand new?

An ex-gf of mine is selling her immaculate '05 model if you're interested.

http://www.cbr250.com/cbr250/forum/topic.asp?TOPIC_ID=64309

It's in seriously great nick with a heap of nice extras.

Birds Grand Master

Birds

Posted
Posted
An ex-gf of mine is selling her immaculate '05 model if you're interested.

http://www.cbr250.com/cbr250/forum/topic.asp?TOPIC_ID=64309

It's in seriously great nick with a heap of nice extras.

Tut tut, should have bought a litre bike straight up :P

JEPPE Mentor

JEPPE

Posted
Posted
An ex-gf of mine is selling her immaculate '05 model if you're interested.

http://www.cbr250.com/cbr250/forum/topic.asp?TOPIC_ID=64309

It's in seriously great nick with a heap of nice extras.

Thats a really nice bike, my gf has one and its pretty awesome.

Cowboy1600 Grand Master

Cowboy1600

Posted
Posted
Tut tut, should have bought a litre bike straight up :P

She had a CBR250 then a CBR900 then went overseas for about 6 months then bought the ZX when she got back.

So as a matter of fact she did buy a litre bike straight up (well, 919ccs).

Priestley Rising Star

Priestley

Posted
Posted
You want more info on the motard 500 or the dirt one?

Very interested in the motard. What are your plans for it? Will it be a race bike or street bike? Are you keeping the original front end? You need to do a build thread on that thing.

Most people avoid 2 strokes these days, its good to see someone keeping them going. I'm hoping direct injection 2 strokes bikes will come out over the next few years. A 500cc 2 stoke road bike would be great...

ylwgtr2 Grand Master

ylwgtr2

Posted
  • Author
Posted (edited)
Very interested in the motard. What are your plans for it? Will it be a race bike or street bike? Are you keeping the original front end? You need to do a build thread on that thing.

Most people avoid 2 strokes these days, its good to see someone keeping them going. I'm hoping direct injection 2 strokes bikes will come out over the next few years. A 500cc 2 stoke road bike would be great...

Ok then...i wont clutter up this thread too much but as a quick run down below is a trial chamber i made out of steel to make sure i get the cones/tapers right for fit then i made a stainless one and guess what?(yep...not finished yet :) ) then i knocked off the standard cast lower fork end/caliper mount and made these billet radial mount puppies up to take twin Brembo 1098 ducati calipers and front wheel is the mate to the rear one...the engine has has ported/air striker carb(but i have a EFI system in the making for this bike) V force reed block,fully mappable CDI unit,i also made some billet upper and lower triple clamps,billet one off suspension linkages,i have a VTR1000 SP1 digital dash for it also...and all brand new genuine 98 CR500 plastics,seat/tank..... plus i prob forgot a truck load of stuff...the bike is a road registered CR500E

gallery_2711_155_20711.jpg

gallery_2711_155_266906.jpg

gallery_2711_155_90963.jpg

gallery_2711_155_18353.jpg

gallery_2711_155_146940.jpg

gallery_2711_155_13481.jpg

gallery_2711_155_42544.jpg

gallery_2711_155_290529.jpg

Edited by ylwgtr2
Russman Grand Master

Russman

Posted
Posted

I have an 03 YZF450.

post-10715-1271723462_thumb.jpg

Also had an '04 CRF250 but sold that after about 2 months coz it would wear out valves in about 2 hours. Piece of crap.

And a 97 KDX200 was my first bike.

Lots of 2 strokes in there!

ylwgtr2 Grand Master

ylwgtr2

Posted
  • Author
Posted (edited)

ok ive been saving the best till last...... i have 2 KSR50's and a KSR80......One of the 50's will get a 2007 kx100 engine i have here and an aluminium frame with i am about to start making....these things are soooo fkn cool

gallery_2711_155_285745.jpg

gallery_2711_155_201642.jpg

Edited by ylwgtr2

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...