Jump to content
SAU Community

Recommended Posts

Hey guys, still have these leftover parts here for sale! Located in Sydney for pickup or I can post

Aftermarket:

Tomei Poncams - 256 in/ex, 8.5 lift. Good condition, suits late model S2 r33 rb25det skylines (with the black CAS) - $500/pair

post-35556-1271927556_thumb.jpg

Exedy button clutch. Push type for R32, R33 Gts-t, etc. Used for approx 5000 ks. Good for at least 250kw+

post-35556-1271927616_thumb.jpg

Walbro GSS-341 255 L/hr, 450HP fuel pump + R33 pump cradle, drops straight into R33 skylines - $100

post-35556-1271927696_thumb.jpg

Front strut brace, suits R33 - $80

post-35556-1271927730_thumb.jpg

Stock parts:

6x standard rb25 injectors, just over 101,000ks, good condition - $100

S2 engine loom, uncut / no damage or mods, great condition - $150

S2 ECU, standard computer - $100

R33 RB25 cam covers - $40

Turbo & manifold heatshields - $30

Rb25 Alternator - $80

R33 std turbo oil/water lines + banjo bolts - $40

Starter motor, suit all RBs - $40

Boost solenoid - $35

Manual tailshaft (inc yoke) - $100

Rear 5 stud hubs, $150 /pair

Rear handbrakes - $150 /pair

Door trims (S2 R33) set of 4, pickup only! - $100

post-35556-1271929177_thumb.jpg

R33 front lower control arms - $100/pair

post-35556-1271928479_thumb.jpg

Castor rods, good bushes - $80/pair

post-35556-1271928492_thumb.jpg

S2 A/C condenser - $120

post-35556-1271928509_thumb.jpg

S2 Steering wheel with airbag, great condition - $230

post-35556-1271928519_thumb.jpg

4x Standard 16" Skyline wheels with tyres. 2 are bald, other 2 have tread left with some inside camber wear - $150 pickup only!

post-35556-1271928533_thumb.jpg

Standard exhaust + cat + dump + front pipe, perfect for clearing defects - $150. $100 for the catback only

post-35556-1271928594_thumb.jpg

R33 weather shields - pair. Good condition, includes all the clips and stuff - $80

post-35556-1271927637_thumb.jpg

Front guards, BN6 colour code, great condition. Pickup only - $50 each

post-35556-1271928853_thumb.jpg post-35556-1271928843_thumb.jpg

  • 2 weeks later...
Hey bud. You replied to my thread on boost. I need an ecu to drive a series 3 motor... so I think I need a S3 ecu. cheers

By 'series 3', do u mean the 40th annv model ? I thought they had the same motor as the series 2 so a series 2 ECU would work, Im sure the Neo didnt come out until the R34.....

How long can you hold the exhaust for?

If u can wait until Wed for payment then consider it sold, i can pick up aswell.

RJ

0401658880 for in inquiries.

sorry - just saw this. Pm sent

$50 for the weather shields picked up?

looks like these are sold pending payment

Hey bud. You replied to my thread on boost. I need an ecu to drive a series 3 motor... so I think I need a S3 ecu. cheers

boostcruising? sorry mate I dont have an account there. but I sold this just last week sorry!

but yeah theres only 2 different types imo, the series 1 with the separate ignitor and series 2

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...