Jump to content
SAU Community

Recommended Posts

hey... wtf

post-22269-1272806509.jpg

got any more info on the left-hand-drive conversion? That looks so clean, it almost looks factory. All the others I've seen look butchered.

hey... wtf

post-22269-1272806509.jpg

got any more info on the left-hand-drive conversion? That looks so clean, it almost looks factory. All the others I've seen look butchered.

Top Secret~~ha~~ i want to know how they make it as well~

:P

hey... wtf

got any more info on the left-hand-drive conversion? That looks so clean, it almost looks factory. All the others I've seen look butchered.

Wah, a first for me.

But it sure does play with mind.

For the LHD conversion (excluding the mechanical) - I'm guessing it's a

-> "cut-and-shot" and a leather/vinyl re-trim.

or

-> they may have got the whole lot and made up a reverse mould and remade the whole lot (dash and center console) - remember this is China - possibly the over could own some sort of pastics factory......

or

-> Middle East spec Nissan Bluebird dash.... (I've read about this - but not sure)

Quite interesting. But if you have a look around on youtube and google - I've seen a few left hand drive GT-Rs in the Philippines.

Some pic from where i come from~ :P

post-22269-1272806036_thumb.jpg

Bahahah Holy SHIT man that is a Hong Kong registered car with a China Cross-Boarder license plate....that PLATE costs more then the ENTIRE car!!!!! (FYI: a china cross-boarder license plate is 1 MILLION HK = ~140,000AUD)

Then again Hong Kong has 100% TAX on cars so maybe not lol

For the LHD conversion (excluding the mechanical) - I'm guessing it's a

-> "cut-and-shot" and a leather/vinyl re-trim.

lol has to be a cut and plastic-welded then retrimmed... cos it doesn't have the signature bubble on the dash where the glue gives.

I think it's just that, and the handbrake being on the other side, with a perfectly adapted centre console that makes it look so clean.

The UAE and Filo LHD swaps just look half arsed compared to this.

lol has to be a cut and plastic-welded then retrimmed... cos it doesn't have the signature bubble on the dash where the glue gives.

I think it's just that, and the handbrake being on the other side, with a perfectly adapted centre console that makes it look so clean.

The UAE and Filo LHD swaps just look half arsed compared to this.

i was going to say it was just a mirror image picture of a normal rhd, then saw the key barrel on the rhs of the steering wheel... very very neat

lol has to be a cut and plastic-welded then retrimmed... cos it doesn't have the signature bubble on the dash where the glue gives.

I think it's just that, and the handbrake being on the other side, with a perfectly adapted centre console that makes it look so clean.

The UAE and Filo LHD swaps just look half arsed compared to this.

Yeh.

Slightly off topic - this is one of the better Filo ones -> http://forums.evolutionm.net/other-cars/19...-vspec-nur.html

Bahahah Holy SHIT man that is a Hong Kong registered car with a China Cross-Boarder license plate....that PLATE costs more then the ENTIRE car!!!!! (FYI: a china cross-boarder license plate is 1 MILLION HK = ~140,000AUD)

Then again Hong Kong has 100% TAX on cars so maybe not lol

why would someone pay so much for a number plate :S

why would someone pay so much for a number plate :S

Because they figure if your going to drive back and fourth from Hong Kong and China your rich enough to be raped up the...yea

Bahahah Holy SHIT man that is a Hong Kong registered car with a China Cross-Boarder license plate....that PLATE costs more then the ENTIRE car!!!!! (FYI: a china cross-boarder license plate is 1 MILLION HK = ~140,000AUD)

Then again Hong Kong has 100% TAX on cars so maybe not lol

You sure it's worth that much? lol

I've seen em on shit cars and vans though :(

You sure it's worth that much? lol

I've seen em on shit cars and vans though :(

Haha lots of money in the smuggling business :) hahah yea but they actually are, I didn't know until my parents told me

why would someone pay so much for a number plate :S

i remmeber speaking to one of my old mans work colleages and he paid over 10million (1.3million aud) for a 2 digit number plate... he wanted to be in the top 20 elite list :D as most of the other owners of single and dual digit numbers are dignitaries or celebs. Status or perceived status is very important over there... hence the huge numbers of merc and BMWs

the number plate trade over there is big business it is around 33-40million (4.4 million aud) a MONTH.

On a different note I sure miss living there, one of the best places on earth.

You sure it's worth that much? lol

I've seen em on shit cars and vans though :P

Haha lots of money in the smuggling business :D hahah yea but they actually are, I didn't know until my parents told me

All good, us 3 Asian bros got the connections with the cashish... :D

i remmeber speaking to one of my old mans work colleages and he paid over 10million (1.3million aud) for a 2 digit number plate... he wanted to be in the top 20 elite list :P as most of the other owners of single and dual digit numbers are dignitaries or celebs. Status or perceived status is very important over there... hence the huge numbers of merc and BMWs

the number plate trade over there is big business it is around 33-40million (4.4 million aud).

On a different note I sure miss living there, one of the best places on earth.

that is fkn crazy :D! no wonder i always see asians at crown...too much money!

that is fkn crazy :D ! no wonder i always see asians at crown...too much money!

Haha no Asians have a big gambling problem when Macau turned into the new vegas there was reports of mothers leaving their <10 yr old children to go gamble for a few days. Police had to get involved and break into the house. One case was where a 12yr old girl was left with some money and her mother went to gamble and people only found out when the teachers found out at the school she goes too. An the worst one I've ever read about is that a lot of houses in HK have 2 doors a main door and a large metal sliding security gate one parent actually locked her child IN BETWEEN the two to go to Macau for the day. Seriously this world is messed

Haha no Asians have a big gambling problem when Macau turned into the new vegas there was reports of mothers leaving their <10 yr old children to go gamble for a few days. Police had to get involved and break into the house. One case was where a 12yr old girl was left with some money and her mother went to gamble and people only found out when the teachers found out at the school she goes too. An the worst one I've ever read about is that a lot of houses in HK have 2 doors a main door and a large metal sliding security gate one parent actually locked her child IN BETWEEN the two to go to Macau for the day. Seriously this world is messed

off topic - but wow - that is just f*cked - it is like locking a kid between the screen door and the main door.... :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...