Jump to content
SAU Community

Recommended Posts

I think everyones circumstances are different. If you're debating whether to go N/A or turbo, no one can really tell you what's best for you - that's something you'll have to decide for yourself.

For me personally, I chose the N/A route because at the time power wasn't my highest priority. Choosing N/A mean't I could get a better car for my money, more importantly I could get THE car I wanted for my budget. With N/A I also got the added (and welcomed) bonus of:

Cheaper Insurance

cheaper on fuel

and it's less likely something will go BANG! :)

The downsides are obvious - less power and less modifying potential.

Do I regret going N/A? Nope. But my next car will be turbo'd...:)

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-642350
Share on other sites

Hmm my choice was based on looks more than power...when I bought my 34 back in 2002 the prices were still high...so N/A was as far as the budget could stretch. But it's getting a turbo put on next week, so I'm going to be happy with the end result anyway :P

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-642422
Share on other sites

i agree, there are plenty of reason to go N/A - Insurance, not so much initial purchase cost, but certainly the quality of the car you get for your money. of course, once your over the initial thrill of your first skyline, you come to realise why the make turbo cars... and then you gotta have one !

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-643363
Share on other sites

yeah i was wondering about that, because i got the feel from some of the posts that people bought an N/A skyline and that sticking a turbo in the engine was something to do when they have enough money.

but i was reading about this guy who as a project is trying to get as much power out of his skyline without using a turbo, so there must be fans.

i'm sure my first car will be naturally asperated, financially but also so i wont kill myself as easily........

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-643419
Share on other sites

also u get owned at the lights

probably find that NA is a favorite amongest younger drivers money wise (yes we want fast cars with big turbos) but in the end the insurance could quite possibly be more than the car. Also you find some people (like dan) end up putting turbo on it anyway, yes its cheaper just to sell the car and buy a turbo one but after owning it for so many months or years you just fall in love with the car and it would be hard to let it go.

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-643470
Share on other sites

I was keen to get a turbo but my parents stopped me. I'm happy with my n/a though :) Sure its a bit slow in a straight line but its still quick enough to rape my mates cars and it handles just as well as its turbo sibling (if not better; less weight). Insurance only marginally better than a turbo, it wasn't a deciding factor. Oh yeah and in Vic the n/a meets the power to weight ratio of 125kw per tonne for p platers, so its good to know you're legal!

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-644256
Share on other sites

You guys actually have restrictions on the power of cars p platers drive!? man, that is the best idea ive heard in a while - there aren't many p platers (or even after that) who can safely handle big horsepower cars. Should be a requirement to pass advanced driver training courses to be able to drive them - better for all of us then - don't kill people, but more important, no writen off cars ! :)

back to the point though, i know what you mean greg, about maybe losing out a bit in a straight line, but pretty much any other car (except the turbo guys of the same) gets left in the dust (or smoke) at the first corner. then again at the second.... and third.... and.... well, you get the point.

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-645323
Share on other sites

yep N/A certainly have distinctive note - specially intake draw. Exhaust can become a bit tiresome on long trips though - Dan, what is that baffle your talking about. I'd have thought you'd need to change entire zorst systems to get them quieter?

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-647074
Share on other sites

GenesisR32 - Yep the car is now in getting all the fruit stuck to the engine, I'll have it my hands by the long weekend...what a wait I can tell you!

pstanbis - Did you mean Dave when talking about the baffle? Either way I used to have the same exhaust as Dave, managed to pull 113db at 4500rpm....let's just say it's one mean exhaust, sounds damn good! The baffle just extends the exhaust pipe through the resonating tip, just tones it down a bit.

If you want to get noticed get this exhaust! LOL

Dan

Link to comment
https://www.sau.com.au/forums/topic/31921-choice/#findComment-647122
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Also build this EH ute with 370z motor and gearbox with a couple of turbos just for fun.  
    • Got the passenger door on plus the master cylinder and booster. Loaded up to take it home. At home, the colour changes a lot in the light.
    • Nothing cheap, but I have seen the AC Hydraulic DK13HLQ which is pretty close to what you're asking for. The problem is the hydraulic cylinder mandates that the back of the jack be a certain height and Skylines have fairly deep inset floor jack points. A more certain and cheap option is to get some nominal 2x10 inch lumber boards and have one board be 1.5 feet, the other board 3 feet. Glue it all together with lots of clamps to maintain pressure. Make two of these. The ramp suggested above is a good idea, it takes quite a bit of clutch slip to get over each of the boards. I only need the first ~1.5 inches for my low profile jack on a standard ride height car but a lowered car you want to go up to the full ~3-3.5 inches. Paint it or store indoors if you want it to last.
    • Ok. And Nistune? I read (here too) mainly on Stagea threads that it can by "turn off" with Nistune. But they say they still had the sensor plug in. Next week iam going to the Nistune(and other ECUs) tuner so i can finally make it work. I drove the car home and apart from the cut it drove great. No misfire no smoke no hesitation or rough start...so hoping it is this sensor that is missing  
    • I just stack 2 pieces of 200x50 timber on top of each other. Total length about 900mm, with the top one being a little shorter and both having a 45° angle cut on them to make the front edge a bit of a ramp. Put these in front of each front wheel, drive up on them, throw the trolley jack under. Takes 1 minute. Scissor jacks can eat a bowl of dicks. I never use on under my car unless desperate.
×
×
  • Create New...