Jump to content
SAU Community

Recommended Posts

Hey guys i've been looking for a gtr r33 series 3 and there was this one that i saw from a car dealer he told me it was a series 3 '97 model. It has the red trimmed interior red light on the rhs tail light where the reverse light is suppose to be. (sorry if it's the wrong term for it) and a black/greyish lip on the front bar. Thing is there's no xenon lights i wouldn't know if this is would actually be a series 1 with series 3 stuff or it's a series 3 that has had its lights swapped. Just wanna verify i'm getting a '97 instead of a '95 model before i buy the car.

p.s the dealer said that the dual air bag came as an option as where as for '98 models it was standard.

-thanks.

Edited by JnJ
Link to comment
https://www.sau.com.au/forums/topic/319771-gtr-r33-series-3-97-vspec-airbags/
Share on other sites

Should have dual airbags on late model R33. Dual airbags were a option on Series 1.

As for headlight, it could be swapped for compliance - If I recall factory xenons will fail compliance due them not being adjustable automatically.

Front lip, is it deeper than normal lips found on series 1 & 2?

Run the chassis on VIN FAST thread it'll tell you exactly what it is.

If you've got genuine S3, ask dealer for original xenons (worth roughly $3k with ballsats).

Hope this help you.

Yep check the VIN number first. The only thing that is strange is the fact it has one airbag....

Series 2 onward should have had dual airbags out of the factory.

Does it have red stitching on the seats/steering wheel?

yeah it does, red stitching on the steering wheel and on the seats.

Ok, another dead give-away would be the rear lights.

Is there 1 or 2 reverse lights?

And do you have the foglight switch under the steering wheel (not directly under but you know what I mean)

Series 3 have 1 reverse light and 1 fog light.

Ok, another dead give-away would be the rear lights.

Is there 1 or 2 reverse lights?

And do you have the foglight switch under the steering wheel (not directly under but you know what I mean)

Series 3 have 1 reverse light and 1 fog light.

yeah it has that too 1 white 1 red.

Hey guys i've been looking for a gtr r33 series 3 and there was this one that i saw from a car dealer he told me it was a series 3 '97 model. It has the red trimmed interior red light on the rhs tail light where the reverse light is suppose to be. (sorry if it's the wrong term for it) and a black/greyish lip on the front bar. Thing is there's no xenon lights i wouldn't know if this is would actually be a series 1 with series 3 stuff or it's a series 3 that has had its lights swapped. Just wanna verify i'm getting a '97 instead of a '95 model before i buy the car.

p.s the dealer said that the dual air bag came as an option as where as for '98 models it was standard.

-thanks.

Hi mate, I'm pretty sure the xenon lights came as a standard feature on all series 3 models. anyways something smells fishy. here are some possibilites

the car might of been in a front end accident where the owner didn't bother replacing back xenons. did you ask the dealer if its an accident vehicle?

some brokers/private importers/dealers purposely swap the xenons out before they send it off to compliance. they do it for the best interested of their clients.

get the vin and check it with NISSAN FAST for the build date.

Hope this helps

Edited by Mingy

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
    • You have a knack for photography my friend. It makes the 86 look like a complete bucket. The 34 went with you to Europe and back. It's special. (we all feel the same about our 'shitboxes' that every bystander seems to absolutely love)
×
×
  • Create New...