Jump to content
SAU Community

Recommended Posts

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Currently, Redline 10w40. Change every 10,000kms.

The engine responds to it the best out of all oils I have put in there over the past 3+ years.

I used to change at 5000km intervals and have also used Motul 300v, Mobil 1, Fuchs, Amsoil, Shell Helix Ultra, Penrite Syn, Royal Purple.

Make sure you use a decent filter too (Veruspeed NIS-004 FTW! :3some: )

Edited by iamhe77

Every 40,000.

Have used Nulon 100% Synthetic ATF for the past year and a half or so.

Is compatible with Nissan Matic J oil. Gear changes feel fantastic under heavy or light load.

Have found that the PWR 6cyl trans cooler are pretty damn effective and help our RE5RO5A transmissions from getting too hot :(

Have found that the PWR 6cyl trans cooler are pretty damn effective and help our RE5RO5A transmissions from getting too hot :(

Quick note for those interested: the Davies Craig trans cooler kit (available at supacheap) is (usually) significantly cheaper than the PWR branded one. If you pull the DC sticker off, underneath you'll find a PWR etching: same cooler, waaaay cheaper.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...