Jump to content
SAU Community

Recommended Posts

G'day, Shane, Chad, Martin, Matty, Brendan, Ryan, Steve, Vu, Krishy, lads, many thanks for all your kind words.

The article turned out really well, a few minor technical spec's and details lost in translation but all in all it turned out better than I could have hoped for. In all honesty, the thanks goes to Guy Bowden, Jason Round and the writer - who's name escapes me at the moment.

And Shane, mate I have not forgotten my EH trophy, not at all ! I've been trying to get some spare time to head down to the workshop (assuming it's still there and they haven't got sick of it gathering dust :)) for the last couple of months. I'm hoping I can get away from work early tomorrow and will head that way in an effort to pick it up.

If any of you are heading down to the Adelaide Hills Tarmac Rally, I'll be marshalling at the Myponga stage on Saturday morning - don't you just love 5am starts. If you are down that way be sure to say g'day.

Hey mate,

Thanks. I popped into the shop a month or so back and saw your beast there, the other beast that is. Hopefully it's finished sooner rather than later mate.

Not yet. I just went with a basic upgrade, slotted rotors, pads, lines etc. Down the track a bit I'll put aside some dollars and when I do, it will be a set-up like you have access to that I will go for!

How is 34 coming along?

Hey stranger, not seen you for long time! Saw you at meet for 6am cruise but thought you were coming

so could catch up later, oh well, next time. Got all your wheel nuts on tight now? ha ha......

Good to see some of the original members still on here, you are one of the rare few who joined before me!

Cheers, John

Hey mate,

Thanks. I popped into the shop a month or so back and saw your beast there, the other beast that is. Hopefully it's finished sooner rather than later mate.

Not yet. I just went with a basic upgrade, slotted rotors, pads, lines etc. Down the track a bit I'll put aside some dollars and when I do, it will be a set-up like you have access to that I will go for!

How is 34 coming along?

Well im waiting for the Supra to be finished bloody picked it up around christmas, took it back for 30 psi tune and we found out the head had broken springs and stuff. So when that one is finished the 34 can get the necessary cooling system and engine rebuild done.

But yeh when your ready man on the brakes, i gotta say i have no complaints about them whatsoever, and the Supra will be getting the same package, i also have knowledge that my set came out of the same factory that builds the Patented Greddy Grex package.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You're not the first person that's said that about this car lol. A Touring wagon GT in Spark yellow mica would be the dog's danglies 😆 I will keep an eye out for a future purchase for sure. The seats are almost like the OEM Recaros... electric adjustment for fore/aft and tilt movements except reclining.   
    • Yes!! I love these! It's a shame its not the wagon though!   Thank everything that's holy that it doesn't have the interior of the Aussie delivered ones. Those seats are so much nicer.  
    • I'm both sorry and thankful that you do that. 
    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
×
×
  • Create New...