Jump to content
SAU Community

Recommended Posts

buy here

you will pay more for the same thing if you import

plus it stimulates the australian economy cos it keeps the $$$ in aus rather than sending some of it to japland

i picked up my manual stag for 13k and it was originally listed at 19k

I agree with buying here. There are about 100 Stageas for sale around the country. You should be able to find a good one that satisfies.

In a word the market is stuffed!

Good time to buy one.

Edited by Appealing

it depends on the cash saving. if you can save a couple of grand by importing, import. otherwise, buying locally is the way to go.

buy here

you will pay more for the same thing if you import

plus it stimulates the australian economy cos it keeps the $$$ in aus rather than sending some of it to japland

i picked up my manual stag for 13k and it was originally listed at 19k

tbh, i find that the perfect reason to import. if car companies stopped giving us shit cars in teh ADM range to pick from, i wouldn't be importing. in my case/opinion, they've only got themselves to blame.

plenty of threads on this, try searching :devil:

yeah i did a search and had really random mixed reviews

I agree with buying here. There are about 100 Stageas for sale around the country. You should be able to find a good one that satisfies.

In a word the market is stuffed!

Good time to buy one.

i've had a look and theres none in VIC... and the price of 260RS over here is about 8k more than the landed and complied price for some importers..

Reckon its worth getting mates interstate to look at Stags for me?

yep

in NSW, http://www.nagoyamotors.com.au/ deliver Australia wide for free

be careful though, you WILL need someone to check out the car first :ermm:

yep

in NSW, http://www.nagoyamotors.com.au/ deliver Australia wide for free

be careful though, you WILL need someone to check out the car first :D

funnily enough, I have a mate who's just moved to Sydney.

I might get him to have a look around for me, but dont want to be a pain in the arse...

Some nice Stags on that site and reasonably priced!

Just wondering what your thoughts are on:

Importing a Stag (or any car really) vs Buying one in Aus?

What are the pros and cons?

I have done both and whilst my first Stag never gave me any problems, it was bought locally, it later became obvious that it had been clocked quite substanially. I bought my NM35 from a Japanese auction house through an agent and at least knew that the mileage was genuine. When I was looking for several weeks many Stags came up which were too expensive for me and now knowing what the cost of importing is I wonder what dealers are paying for Stags or where they are buying them from to be able to offer them so cheaply. During my search I was warned away from certain areas in Japan to look for cars due to several different reasons so I suppose in the end you pays your money you take your chances either locally or offshore, anyway good luck I hope you find what your looking for

yep

in NSW, http://www.nagoyamotors.com.au/ deliver Australia wide for free

be careful though, you WILL need someone to check out the car first :P

I can vouch for Alex and Dimitriy at Nagoya. I just bought my stagea from them and couldn't fault them. I was undecided on which one to buy (as they have quite a few in stock). They were prepared to swap wheels over for me as well, but I decided on a silver one with 17" work wheels.

I agree, get everything checked over first before you sign on the dotted line. If you aren't happy with something in particular I'm sure the guys at Nagoya will fix you up

Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
×
×
  • Create New...