Jump to content
SAU Community

Recommended Posts

Guys i was looking into some pod yesterday, was thinking of which pod actually suit me better for my 33 until i saw an article about 3A racing pod. I believe you guys know its a cheap pod and probably can get it from supercheap or repco. amazingly the 3A racing pod do better than any pod that we are using today like apexi, hks, and more famous brands. below is a link to show you the magic of these pod! Its a short article but with fancy pictures so will not be boring, starting today change your pod filters to 3A racing pod lol.

Go to

http://www.3aracing.com.au/HTML%20Folder/0...erShootOut.html

Click

Read Article

Link to comment
https://www.sau.com.au/forums/topic/321542-unbelieveable-3a-racing-pod/
Share on other sites

what a joke .

what is the piont of a FILTER . to FILTER particles out of the air that damage your engine . get something that filters properly and if you can prove on the dyno it is a restriction get a bigger filter untill it is not

having plenty of experience with filters on moto x bikes the general consesus is oiled cotton and oiled foam are on par with each other while clean but when dirty the k&n will outflow the foam ones due to more surface area

although rush goes some way towards fixing this with its contoued outer surface

http://www.uniflow.com.au/contents/media/A...sh%20Filter.jpg

Years ago Xspeed tested all the big name Filters on my Dyno, the $20 dollar specials were the highest power outputs and now afte all the years theres been no damage from poor filtration. Many of the mega Dollar stainless mesh big name jobs catch small animals and rocks and nothing else.

dont know with you other guys that are running these filters, do yous have really loud induction noise and some flutter too. with my 180 i have this filter and sounds like the turbo is spooling up and its not even boosting, sounds cool tho.

Yeh i personally don't believe it. I take these tests with as much seriousness as tests of flow on catalytic converters. It is very easy to over clock the flow rate and then quote the filter rate at the bench flow rate. Everybody looks at the flow rate and goes oh wow it MUST be good, but then don't stop to think that the quoted filterage could be taken at a lower flow rate.

I used to have a 3A filter on my car. Replaced it with an Apexi and i could definitely feel the improved response, plus i have to clean the Apexi filter more often than i did the 3A, which tells me it is picking up more of the dirt rather than letting it through.

thanks for the info. New for me. gonna get one for my 33 :)

LOL looks like i am advertising for 3A... personally didnt belive such cheap pod can do better than any other brands but with my opinion, the price of the brand name is there for a reason, so lastly i had choose Apexi pod for my 33. for whatever reason it just seems like a scam to me lol no offense but just unbelieveabe. I would say i can give it a try but not on my 33 or may be my daily (In case to see how it goes) haha.

Im fitting 1 to my GTiR Racecar, Good power, good filtering and cheap enough to replace often. Ive seen the results 1st hand and can think of lots of other places the extra money could really help. The money saved is the difference between good DS3000 Brake pads and sensational RS14 Pagid for example.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...