Jump to content
SAU Community

Recommended Posts

i put a rb25det version1 in a r32 sky...i kept the rb20det loom exept for the injector clip,i trim to fit the rb25 injector plug in my rb20 wiring to fit the rb25 injector...so now the trouble is when i crank i have spark on plug and signal on injectors but wont open for fueling in engine. the fuel pressure is good only if i put visegrip on the return line(yes the fuel line are connect right way)55lbs fuel pressure

i try both computer rb20 and 25,other cas but no fuel again

please help

so if you keep the vise grips on the return hose will it start?

doesnt the RB20 have a dropping resistor for the injectors in the harness?

no the only thing the vise grip do is maintin the fuel pressure to 50-55psi and for the resistor i dont know thats why im asking

thanks

the fuel pressure is good only if i put visegrip on the return line(yes the fuel line are connect right way)55lbs fuel pressure
Then the regulator is stuffed. Try swapping the regulator from your 20.

spray some carby cleaner or start ya bastard into the throttle body while cranking and see if it fires.

take off the fuel pressure line and put into a bottle and check that there is plenty of flow from the fuel pump. might be too weak.

check power to the injectors and negative pulse at the injectors with a LED test light,

if thats good then more than likely the injectors are seized

ok so i have good pression from the fuel pump and she working in my 240 sr20det without prob.

i have pusle at the injector but dosent click loud

if this possible that the 6 injectors are seized????

if a shoot carbcleaner in the intake the motor want but dosent start

and what the matter with pin 112 and 114 : i need to cross them or not...anyway both way dosent start

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...