Jump to content
SAU Community

Recommended Posts

has anyone ever opend their bonnet after driving in rain? especially heavy rain? everything is soaking wet, the vents will be fine no water will get anywhere.

most people hose their engine bay down to clean it, i do most times i wash the car, its fine

  • Replies 76
  • Created
  • Last Reply

Top Posters In This Topic

just excessively spray ALL the electrical wires and connectors etc with WD40 or some other type of water dispersant

then degrease the shit outta it, then hose it all off

make sure engine is warm when you do it

then go for a 15min drive

and if need be spray electricals with WD40 again

As for CF bonnets,

i wouldnt buy one with a forward facing vent personally, not unless it had a mesh/filter or something

vents that face the driver are the best, wind is streamlined across the bonnet going over the vent, and creating a vacuum thus sucking out hot air from the engine

Yesterday was the first time the weather got the better of my bonnet but it came up on top like mentioned previously the bonnet are designed to overcome weather conditions .As for the bonnet being illegal yeah they have been illegal from dot. But most police will get out the book if they really want to come down on you . I drive mine most days and haven’t had much trouble at all that doesn’t go to say I never will, but I think it comes down too you doing stoopid things in certain places to attract the wrong attention police or otherwise. So with that in mind I would be careful in what you do and where you go if you want something more unique then conventional.

what i meant was it was the first time i really put my put bonnet against the elements it hasnt rained since iv had it on the car but the other day i had to take it out and it rained , youll be happy to know it didnt melt

I have been thinking about getting my bonnet modified with some cold air vents and have been worried about the water thing too.

I want to get a vent right on top of the pod.

Dont know exactly how yet but I am going to get something on the underside of the bonnet that will allow me to shut off the vent in wet weather.

  • 2 weeks later...
Well just after having the cf bonnet on for a few weeks, I got defected. No fines, just to have it cleared.

that has to suck :P , your probably the first i know that got done for cfb just out of curiosity where you from ?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
    • Not sure yet.  Was considering speedtek because it was rated to 800hp, but when I did some research about him I don't think I will go for that🤣 So maybe giken gear set, but I'm afraid it won't be strong enough🙄
×
×
  • Create New...