Jump to content
SAU Community

Recommended Posts

Hey folks.

I had my Stagea out at my parents for the past few weeks.

Recently the fuel got really low, light on and everyhting.

Dad put five litres of fuel in to get it started and take it to fill it up, but the car wont start.

He said it just cranks over and over, but won't actually start up.

He suggested it may have sucked up some bad fuel, or a sensor is playing up or something, but I'm not exactly as I am at work still...

Any ideas what to check to get this thing running again?

Link to comment
https://www.sau.com.au/forums/topic/321913-stagea-wont-start/
Share on other sites

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Hey folks.

I had my Stagea out at my parents for the past few weeks.

Recently the fuel got really low, light on and everyhting.

Dad put five litres of fuel in to get it started and take it to fill it up, but the car wont start.

He said it just cranks over and over, but won't actually start up.

He suggested it may have sucked up some bad fuel, or a sensor is playing up or something, but I'm not exactly as I am at work still...

Any ideas what to check to get this thing running again?

Sounds like the fuel pump but it could also be your alarm......don't keep cranking it....the starters in these are hard to come by and easy to stuff!

Edited by Jetwreck
Sounds like the fuel pump but it could also be your alarm......don't keep cranking it....the starters in these are hard to come by and easy to stuff!

Ok, what could be the alarm?

I'll make sure he doesn't keep cranking...

is car on FLAT ground . fuel tank is a big flat shape and 5 litres might not be enough

Yeah, its on flat ground. I will see if he can add more fuel?

If its like a C34 pickup is on the right hand side and steeply cambered road can be enough to starve the pump. Try more petrol. Also could have sucked up cr*p from the bottom of tank. Fuel filter in engine bay is easy to change ...the one in the tank a little more work. Can you hear the pump trying to prime when you turn the key to the ignition on without cranking the starter??

If its like a C34 pickup is on the right hand side and steeply cambered road can be enough to starve the pump. Try more petrol. Also could have sucked up cr*p from the bottom of tank. Fuel filter in engine bay is easy to change ...the one in the tank a little more work. Can you hear the pump trying to prime when you turn the key to the ignition on without cranking the starter??

I'm not 100% sure if he can hear it. Just speaking back and forth with him whilst he is playing round...

He is just checking the fuel pump situation now, as he spoke to a mate who is a mechanic and plays on lots of Nissan Imports, and he suggested the Fuel Pump also.

Thanks for the replies guys...

If its like a C34 pickup is on the right hand side and steeply cambered road can be enough to starve the pump. Try more petrol. Also could have sucked up cr*p from the bottom of tank. Fuel filter in engine bay is easy to change ...the one in the tank a little more work. Can you hear the pump trying to prime when you turn the key to the ignition on without cranking the starter??

No fuel filter in M35. Pickup sock is it.

I have a spare pump if its stuffed 3PointJ as I replaced mine with a Tomei R33 gtr unit.

No fuel filter in M35. Pickup sock is it.

I have a spare pump if its stuffed 3PointJ as I replaced mine with a Tomei R33 gtr unit.

Haha, awesome, well I'll let you know how we go...

Appreciate the offer :blink:

Nah, no more cranking lol...

He is pretty good with cars, and was an Auto-Electrician by trade for a few years, but just hasn't dealt with some of the newer cars and doesn't want to f**k anything lol...

Anyway, he said found the fuel pump, but it doesn't seem to be getting any power...

He asked could there be some alarm stopping the Fuel Pump getting power? or if a Relay has died where he could locate it, or if any other info may be able to help us out...

Big thanks...

You could just run direct battery power from the ignition, through a relay the to the pump if need be, even as a test.

Could be the stock immobiliser if you don't have an alarm.

Yeah he is trying to bypass and give power to the Pump to test.

Well it does not have an Aftermarket Immobilisers/Alarm that I am aware of...

If it is the stock one, anyway around it ?

Alright.

Put power to the fuel pump and it worked fine...

So, we are thinking it is something electronic.

Asked if someone could tell us the location of the Fuel Pump Relay, save pulling the car apart...

Or if anyone knows what maybe preventing power going to the Fuel pump and has inside info, that'd be great..

Thanks.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • LOL, all of the CAI like Craig I just need to put a hole saw through my bumper Done and dusted, the car runs, which is nice, I'll take it for a spin when the weather clears up Just need to put the bumper back on for good
    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
×
×
  • Create New...