Jump to content
SAU Community

2-peice Rotors; What's Out There?

_Wing_
 Share

Recommended Posts

Kaido_RR Grand Master

Kaido_RR

Posted
Posted (edited)
Looking for GOOD 2 piece rotors to suit R32 GTR and/or R34 GTT.

Two that I know of are:

Project Mu, but they're not curved vane just regular pillars, costs about $650 each...

Endless, looks vaned but can't fine any info on them, costs about $750 each...

Is there anything else?

Endless do 2 style in there 2 piece rotors

endow.jpg

Racing Curving

Racing E

They are available for R32 GTR however they only list for R32 GTS-T not R34 GT-T

Edited by Kaido_RR
djr81 Grand Master

djr81

Posted
Posted
Looking for GOOD 2 piece rotors to suit R32 GTR and/or R34 GTT.

Two that I know of are:

Project Mu, but they're not curved vane just regular pillars, costs about $650 each...

Endless, looks vaned but can't fine any info on them, costs about $750 each...

Is there anything else?

The project Mu rotors aren't regular pillars in the same sense as the stuff you get from RDA. In terms of how much air they pump the order would be:

RDA (ie pillar design).

DBA (dogbone design)

Project Mu (whatever you may like to call what they fit to the 2 piece rotor)

Fully vaned rotors, obviously the more vanes the more air they move, also the heavier they are.

There are others - oddball stuff - but in terms of what you may reasonably get locally (or import) the list is pretty much Project Mu, Endless, Biot & APP. Of those an imported Project Mu rotor is probably going to be the cheapest. Having used them they are very good.

_Wing_ Proficient

_Wing_

Posted
  • Author
Posted

I'm leaning towards endless or pmu but keeping my eyes open at the moment.

Endless is curved vane from what I can see, has wanky e-slit design and a duralumin bell... I wonder how well the duralumin holds up in this application? Dural is amazingly light and it's used by Rays Engineering for their lug nuts amongst lots of other stuff.

Project Mu are popular and it's interesting to see that pmu has a funny way of pillaring/vaning in that the better the rotor, the less vane'y it gets and the more pillar'y it gets (check out the bottom of this image):

Image10.jpg

Biot and APP are very oddball so they're not on top of my list, although biot does have 3-piece rear rotors which is very interesting :P

djr81 Grand Master

djr81

Posted
Posted
I'm leaning towards endless or pmu but keeping my eyes open at the moment.

Endless is curved vane from what I can see, has wanky e-slit design and a duralumin bell... I wonder how well the duralumin holds up in this application? Dural is amazingly light and it's used by Rays Engineering for their lug nuts amongst lots of other stuff.

Project Mu are popular and it's interesting to see that pmu has a funny way of pillaring/vaning in that the better the rotor, the less vane'y it gets and the more pillar'y it gets (check out the bottom of this image):

Biot and APP are very oddball so they're not on top of my list, although biot does have 3-piece rear rotors which is very interesting :P

Last time I checked Endless rotors were not a cheap night out. You may be able to do better, however.

Duralium is just a type of aluminium. The hats stand up fine & will outlast the rotors. They are usually anodised. What happens is that it usually works just as cheap to get the whole hat/rotor combination that it is to buy a rotor & the bobbins seperately.

If you are interested I have a couple of second hand Project Mu 2 piece rotors for a R32 R in my shed that are for sale.

badhairdave Proficient

badhairdave

Posted
Posted (edited)

We all know they do something extra for roy...

I'm running the 310mm scr pros and really can't fault them. I've gone through a set of HC+ and SBS carbon ceramics and the rotors still have a lot of meat on them with minimal lip.

Edited by badhairdave

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...