Jump to content
SAU Community

Recommended Posts

Hey all.

I want to get some Deep bright blue Headlights for my nissan skyline R33. I want parkers, low beam and high beam,

I tried the repco ones " Ultra Blue".

But no luck, they aren't as blue as i want them,

And yes i know Blue is illegal,

Does anyone know where i can buy these from? Any Help would be great

Thank you

Link to comment
https://www.sau.com.au/forums/topic/322790-blue-headlightscan-anyone-help/
Share on other sites

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

I was waiting for someone to say that, Lol,

To be honest, i just like them, like the look of blue and the view they give you

it's also good how they glare into the eyes of oncoming driver NOT!!!!!

hence why they are illegal

Also you many have a problems using 8000K + i have seen peoples headlights melt because they are such a hot light.

Skylines healights are only plastic not glass or of high quality plastics like Merc and such. i know 6000k is safe but 8000k is a pretty hot light and they can melt the plastic in the headlight if your not careful with the Kelvin rating you pick.

Also you many have a problems using 8000K + i have seen peoples headlights melt because they are such a hot light.

Skylines healights are only plastic not glass or of high quality plastics like Merc and such. i know 6000k is safe but 8000k is a pretty hot light and they can melt the plastic in the headlight if your not careful with the Kelvin rating you pick.

Thanks for letting me know

all over ebay

eg; http://cgi.ebay.com.au/H1-8000K-HID-Philip...=item2ea92be28f

get ready to be pulled over and defected though. also, dont drive anywhere it's too dark, coz you wont be able to see shit.

+1. i've driven a skyline that had really blue lights as the high beams. it was terrible. while they lit up a decent distance, trying to actually make anything out was hard. low beams were actually better for seeing off into the distance than the highbeams were.

once you go above 4000k in a conventional bulb you start losing light.

my advice is to stop being a ricer and get lights that allow you to actually see where you are going

Also you many have a problems using 8000K + i have seen peoples headlights melt because they are such a hot light.

Skylines healights are only plastic not glass or of high quality plastics like Merc and such. i know 6000k is safe but 8000k is a pretty hot light and they can melt the plastic in the headlight if your not careful with the Kelvin rating you pick.

Kelvin rating has nothing to do with heat. You have no idea what you are on about.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...