Jump to content
SAU Community

Recommended Posts

Motor has to come out to be built anyway.

SIF live with 2 years of a laggy 300rwkw.

Eat $1000 on the turbo change (sell/repurchase). Best $1000 you'll spend really

+1. Laggy crap setups suck. In the grand scheme of thing's $1000 is nothing.

I knew that you would like that.

I'm only doing the essentials basically.

Fuel pump, injectors, PFC, high flow cat, big front pipe.

I think that's it

if you are keeping AFMs might need to upgrade but have seen ppl get around this, dont ask me how hahaha

Big dump pipes would help too :thumbsup:

I heard afms reach their limit around the 300 mark. We'll just see how it goes.

But heard that 33 gtr dumps should be fine. Once again let's find out. Gaha. I'll report back as soon as its all on and tuned. First week of march will be the time.

I heard afms reach their limit around the 300 mark. We'll just see how it goes.

But heard that 33 gtr dumps should be fine. Once again let's find out. Gaha. I'll report back as soon as its all on and tuned. First week of march will be the time.

Looking fwd to the results

  • 1 month later...

My results during today's tuning session, will hopefully get the car tomorrow after a little more tinkering.

But,

312kw at 19psi

303kw at 18psi

287kw at 16psi

Will be posting graph and took some videos as well.

First I want my car back.

But basically the run down is, my cat is being a bitch, 4" 100cell. I have a big front pipe, 2x3" 1x3.5". Stock 33 dumps though. They are most likely causing the most restriction. Also afms are maxing out.

All in all, happy :). I just want to drive it already.

33GTR dumps wont be an issue.

I was making 340rwkw on -9s with ~22psi using R33 dumps.

Upgraded to Tomei dumps when putting on -5s... The only comparative difference was exhaust note.

Cars with stock dumps and -5s made the same power/response as my Tomei equipped set-up.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...