Jump to content
SAU Community

Recommended Posts

Hi guys,

Im looking at turbo'ing my car. At the moment i have limited money and i've sussed out all of the options available.

Firstly i don't want to buy a turbo 33 because ive spent so much time and money on my car at the moment. I would just rather turbo mine.

I have looked at the option of buying an engine but costs are holding me back!

Do you reckon i could efficiently turbo my car for a fraction of the price of a turbo engine?

At the moment i'm prepared to turbo it and take it easy in order to wait it out until i get the parts!

What are the essential items in which i need to turbo it instead of the stupid extras which are just power additions to the conversion?

What do you guys think?

cheers

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/
Share on other sites

just one think to keep in mind mate.....small things add up pretty quickly.....personally i would just wack a RB25DET motor in there....would be the best thing to do and see if you can sell you NA motor....might have to wait a bit longer but then you wont have the head ache of little things letting go on you...

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5270111
Share on other sites

I have looked at the option of buying an engine but costs are holding me back!

Do you reckon i could efficiently turbo my car for a fraction of the price of a turbo engine?

No. Close thread. Dude unless you own a workshop or can do EVERYTHING yourself, and plan to steal all the necessary parts, then no. Sell it and buy a turbo.

It's not that it's overly complex, it's just that it's far from "a cheap way".

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5270136
Share on other sites

No. Close thread. Dude unless you own a workshop or can do EVERYTHING yourself, and plan to steal all the necessary parts, then no. Sell it and buy a turbo.

It's not that it's overly complex, it's just that it's far from "a cheap way".

sorry mate just wondering what your opinions were

cheers

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5270146
Share on other sites

There is heaps about doing this in the Naturally Aspirated Performance forum section.

I had an R34 NA with a plan of making it turbs, after quotes and research, the costs and risk associated with it were not worth it. (just have a read in the NA section)

If you were going to do it, then swapping the entire engine is the best bet, you will probably need Regency approval on it id imagine.

It will probably work out the same, if not cheaper to sell your car and buy a turbo one straight out.

Not what you want to hear, and not what I wanted to hear when I wanted to do it.

Good luck.

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5270831
Share on other sites

it will start off as a very expensive thing to do and the costs will just pile up from there on mate.....do what penny did.....sell the skyline and get a WRX :).......from where i look at this is....your options are:

1 - sell yours and get a 33 GTST

2 - swap the motor, do the brakes and go via regency

3 - turbo your motor (very very expensive)

personally i would go with either 1 or 2 :)

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5271077
Share on other sites

it will start off as a very expensive thing to do and the costs will just pile up from there on mate.....do what penny did.....sell the skyline and get a WRX :) .......

WIN!! Hahaha

It was hard to let go of those sexy curves and hot plate lights.... but the power and handeling of the rex is more then compensation.

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5271106
Share on other sites

Dom, from what most are saying in here, it's not only a $$ thing that you have to factor in your decision but also the heartache involved in the whole process (ie. brake upgrade etc).

Unless you have time on your hands and the drive to do it, the easiest option is to start again.

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5271444
Share on other sites

After just having finished the final bits of a 25DET transplant in my cousins 33; listen to Pete and everybody else here, take the easy option Dom... sell and buy a gtst.

I know you don't want to get rid of your car because you've put time and effort into it, but it will be worth it in the end. You'll end up spending more on all the parts needed, labour (if you're not going to do it yourself), etc than what you will if you sold your car and paid a few $k in difference for a gtst.

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5271536
Share on other sites

cheers for your opinions guyss

i am looking at the moment for a new car

theres a few but looking at buying in Melbourne..

Heaps cheaper and better quality (from what can be seen by pictures).

I will keep you guys updated

cheers guys

Link to comment
https://www.sau.com.au/forums/topic/323270-turbo-or-buy/#findComment-5272829
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Stock ECU (or more accurately stock tune) absolutely refuses to go over 10psi and behaves like you have seen. The Nistune is the same if it is the stock tune. If the Nistune chip has been tuned, the resulting tune could be literally anything for any combination of parts. The Nistune just makes the stock ECU Tunable.
    • So stock ECU does not like anything above 10 psi?  That Nistune one is just for "try" if it will be any different, I know it need to be tune for that. I know but YOU may know about these problem but i/we dont. They few little Skylines here let alone people who know anything about tham so that is why iam asking here  
    • So now we have a radiator with no attachments whatsoever. It lifts up with a particularly tight spot between the drivers side air box mount and the lower radiator outlet, but if you've got this far you will sort that too. This is the lower mounts with the rad out so you can see where the rubber bushes go, it is a straight shot upwards Done! Assembly is the reverse of disassembly, with blood less likely to be shed.
    • Right, onto the second last trick. The Air Con condenser is mounted to the front of the radiator and stays in the car when the radiator is removed. There are 2x 10mm headed self tappers holding the top of the condenser to the radiator, remove those The bottom of the condenser is attached to the radiator with clips. You need to lift the condenser out of those clips and clear (up, then forward). f**ked if  could work out how to do that last bit with the front bumper on. I hope you can, and you share the trick.  Bumper removal probably deserves its own thread one day once I've recovered the will to live, but basically you need to remove the wheels, front inner guard liners (clips and 10mm headed bolts), the self tapper between the guard and the bumper at the rearmost point of the bumper (same as an R32 that bit), any remaining clips at the top/front of the grill, an absolute bastard design with a plate that holds the top of the bumper above the headlight each side (only 1 bolt which is tricky to get to, but the plate catches 2 places on the bumper and must be removed....carefully!) and push clips between the bumper and guard under the headlight. If you've done all that you will be faced with wiring for the fog lights on both sides and in ADM Q50 RS at least, 4 nasty tight plugs on the driver's side for the ADAS stuff. So, the clips at the bottom look like this on drivers side (looking from the front) And on the passenger side (also from the front), you can see this one is already out Clearance on both of these are super tight; the condenser needs to move up but the upper rad support mount prevents that, and the radiator can't move down far because it is (rubber) mounted. Once you achieve the impossible and drop the condenser off those mounts so it does not stop the rad moving, you are good to go
    • OK, next the shroud needs to come off and there are a couple of tricks. Firstly, there is a loom from near the passenger side headlight to the fans, coolant temp sensor etc and there is no plug to undo.  In my case I was OK to leave the shroud on top of the engine so I just undid the passenger side fan plug and about 10 of the clips which gave enough free wire to put it aside. The fan plugs were super tight, the trick I used was a small falt screwdriver to push down on the release tab, then a larger flat screwdriver to lever the plug out of the fan unit....be careful with how much force you apply! If you need to remove the shroud altogether for some reason you will have to deal with all the plugs (tight) and clips (brittle)....good luck. I removed all of the clips and replaced them with cable ties that I will just cut next time. Also, in the Red Sport / 400R at least, the intake heat exchanger reservoir hose is bolted to the shroud in 2 places with 10mm headed bolts; so remove them (the hose stays in the car; no need to undo it at the t fittings down at the radiator lower mount. Once you've dealt with the HX hose and the wiring loom, there are 3x 10mm headed self tappers holding the top of the shroud to the radiator; remove those.   The shroud then lifts out of the bottom mounts where it sits on the radiator, up and onto the engine out of the way. Simples
×
×
  • Create New...