Jump to content
SAU Community

Recommended Posts

Hey,

Needed to replace my engine fan due to larger radiator.

Went down the thermo-fan path and now need a controller!

I am after a thermo fan controller which reads water temp sensor (better to get another water temp sensor), can define a turn-on temperature (85degrees) and turns off when reaches another temperature (80degrees)

and turns on constantly when AC is on.

What is the best option to do this?

I have found;

http://www.spalusa.com/store/main.aspx?p=i...item=FAN-PWM-V3 but they want $160usd for it O_o

Thanks for the help

Link to comment
https://www.sau.com.au/forums/topic/323396-thermo-fan-controller/
Share on other sites

Drift have a pretty nice looking fan controller & at a very reasonable price...

Haven't used one myself but have heard good things about them. Check it out on their website.

As for the a/c side of things I think you're on the right track. May need a 5-pin relay with two switch points, one for fan controller, one for a/c...

Drift have a pretty nice looking fan controller & at a very reasonable price...

Haven't used one myself but have heard good things about them. Check it out on their website.

As for the a/c side of things I think you're on the right track. May need a 5-pin relay with two switch points, one for fan controller, one for a/c...

Cant find an instruction manual for it. The site doesnt say much about its functions which is a pain.

i have a hks fan controller, comes with loom etc, it gives in-car temp reading etc, never used, u just need to download the user manual and ur good to go

exactly like this

http://www.frsport.com/HKS-Universal-Elect...ller_p_875.html

120 bucks delivered anywhere in aus u may be :)

i have a hks fan controller, comes with loom etc, it gives in-car temp reading etc, never used, u just need to download the user manual and ur good to go

exactly like this

http://www.frsport.com/HKS-Universal-Elect...ller_p_875.html

120 bucks delivered anywhere in aus u may be :)

Hey,

Thanks for that, let me do some reading up on it to see if it can do what I am after.

Ill try and find a user manual.

Cheers

Thanks for the links Trent.

Cant find user manual for the Drift controller so unsure how it exactly works. Im leaning towards the Spal thermo controller which can control two fans independently and loads them up gradually from 50% to 100% if temperature increases. Stops two thermos turning on at 100% and draining my car of electricity haha.

Looking into fitting an AU thermo shroud as many have done in the past. If it doesnt fit, ill go down the path of your flex-a-lite low profiles.

Oh how i wish you still did mechanical work ;)

on another note (if you see this reply);

had to replace the gtr injectors 440cc with 550cc due to leaks!. Is there a way I can limp the car down to your place for a tune?

Cheers

sounds like an easy job for a small microcontroller and a relay/thyristor... could even run it on PWM using a thyristor to keep a more constant temp.

haha well you seem to know whats going on. Make one up and earn some quick cash :(

Maybe i should. wonder if anyone else would want one.

The first one would be a very rough prototype, if i was to make one. Not too pretty to look at...

I'll have a look at water temp sensors, do ya know where the stock one is located?

Maybe i should. wonder if anyone else would want one.

The first one would be a very rough prototype, if i was to make one. Not too pretty to look at...

I'll have a look at water temp sensors, do ya know where the stock one is located?

this is where it is for the r32, not sure on any other model skyline

post-a274047-water-coolantsensor.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
    • My experience with Rising Sun Exports Before agreeing to the sale I tried to do as much research as I could (obviously), his Facebook reviews are 98% and he goes Live at least once or twice a week. I contacted 2 people in the UK who had used him for their imports, both had positive feedback. His explanation and talk through of the import process was thorough, answering any query no matter how stupid it was. It felt as soon as the money was sent, communication dropped off. I asked for shipping updates every 2 weeks or so, not wanting to pester him, he never had any updates. I wasn't informed the car had been dropped off at the port, I only found out by his Facebook story. I asked for the photos taken at the port, knowing he would need some for insurance purposes. I received a few 5 second clips and that's it. When asked again, he said his staff had them. Weeks later I asked again, he tells me he doesn't have any, but does have 50 photos from the original advert. I never received them. I eventually got the documents sent via WhatsApp after I mentioned the port was requesting them. I purchased a CarVX report, to find out the vehicle is a Grade R with recorded accident damage, first recorded in 2017 when it was first auctioned. He never told me the grade, then again I didn't ask. His response was "Grade R means nothing, it wasn't chassis damage". Still, I would have liked to have been informed about it. Jon prides himself on being open and honest when it comes to inspecting cars, it's his main job doing so at the auctions for customers. When the vehicle arrived in the UK I noticed a few little cosmetic issues. It's a 21 year old car so it wasn't going to be mint condition. The side skirts are cracked on each corner and the sealant is failing. The front grill on the bonnet/hood isn't secured very well, mounting studs are missing. Both minor things, but again, it would have been nice to be told. During a Facebook Live walk around video of the vehicle, he mentioned it has a front Whiteline anti roll bar/sway bar. While on the inspection ramp, I noticed the stock item has been installed. When first questioned, his response was "the ARB? Switched? Since when, it never had them". Since sending video and photo evidence I've not received a response. I'm probably being over critical of the overall condition of an old car, but all I wanted was honesty (which he claims to have). I'm aware I wasn't his only customer, he's busy doing XYZ but other reviews praise him for great communication with regular updates and photos, I felt I didn't receive the same treatment. 
    • I was able to get some underside photos while the car was on the ramp The suspension is all Altezza/IS200/IS300 so getting part's will hopefully be less of a headache
    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
×
×
  • Create New...