Jump to content
SAU Community

Recommended Posts

You need a retune to make use.

Just changing fuel will not realise the full benefits.

There is extra timing and fuel mappings that need changes to see the gains that are to be had.

That's what I thought, but is there any danger?

ie due to the ethanol content not flowing enough fuel on the PULP98 tune? Or is 10% ethanol not enough to drastically change the flow requirements?

Should be ok, I tried it a while back for its higher octane but I found little difference in knock protection between that and BP98. If you want benefits re-tune for E85, more pumps should become available very soon.

Should be ok, I tried it a while back for its higher octane but I found little difference in knock protection between that and BP98. If you want benefits re-tune for E85, more pumps should become available very soon.

No worries. Yeah i plan on getting a netbook to plug into the Haltech and tuning a map for E85 so i can switch between the two as need arises... Just dropped $10k+ on the car though so perhaps i'll leave it a while.. ;)

That's what I thought, but is there any danger?

ie due to the ethanol content not flowing enough fuel on the PULP98 tune? Or is 10% ethanol not enough to drastically change the flow requirements?

Well not overtly major other than the "why?" ;)

Just use as is until you are tuned for it.

Well not overtly major other than the "why?" :down:

Just use as is until you are tuned for it.

I just happened to be at the airport and needed some petty. United had E10/100 and as i'm not sure what their 98 is like i thought i'd chuck half a tank in.

Just wanted to make sure it wasn't going to break anything :blink:

i use E10/100 ron and i certainly rate it. its about 1.20 a L most days and ive tuned my car to suit the fuel. awesome torque gains from few degrees extra timing.

Would tuning for it be that easy - just bung in another couple degrees and run it up on the dyno to make sure it's still not near detonation?

after all the dollars you spent on a custom tune I would just run 98. I would only run the E10/100 ron fuel if you took it back for a quick retune.

I tried the E10/100 ron fuel a while ago and I got 5L/100km worse fuel economy for no gain in power (because I didnt get a tune). So I quickly changed back to 98.

Just wait for E85 and get a custom tune done then.

Edited by Harey
after all the dollars you spent on a custom tune I would just run 98. I would only run the E10/100 ron fuel if you took it back for a quick retune.

I tried the E10/100 ron fuel a while ago and I got 5L/100km worse fuel economy for no gain in power (because I didnt get a tune). So I quickly changed back to 98.

Just wait for E85 and get a custom tune done then.

Aight :blink:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...