Jump to content
SAU Community

Fluid Reservoir In Boot

Hanso

By Hanso,
in Four Door Family & Wagoneers

 Share

Recommended Posts

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

If your "S" is 2wd then the reservoir should be for the hicas. Presumably you still check it with the engine running and use a quality atf.

Or you can fit a hicas lock bar and rip all that stuff out.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted
Mine is 4wd
Sorry its the "V"thats 2wd. Instructions as above! If you let the level get low enough the 4wd light will come on. Stagea Atessa is hydraulically actuated and controlled by a seperate computer. Earlier Skyline ones were mechanical.
Punk72 Community Regular

Punk72

Posted
Posted

before adding or going out and buying some fluid just check to see if it actually does need some because when you look at the reservoir it looks darker on the bottom due to a filter or something in there which makes

it look empty but it is actually full, you need to open the lid and check or shack the reservoir,

And as KiwiRS4T said check with engine running

Race__24 Experienced

Race__24

Posted
Posted
If your "S" is 2wd then the reservoir should be for the hicas. Presumably you still check it with the engine running and use a quality atf.

Or you can fit a hicas lock bar and rip all that stuff out.

Only the R32s had hydrolic HICAS, they scrapped it when they moved to the R33 and "Super HICAS" which is 100% electronic. Pretty sure the 32s fed from the power steering reservoir.

lilcrash Veteran

lilcrash

Posted
Posted
Sorry its the "V"thats 2wd. Instructions as above! If you let the level get low enough the 4wd light will come on. Stagea Atessa is hydraulically actuated and controlled by a seperate computer. Earlier Skyline ones were mechanical.

sorry off topic but i always thought the "V" is for auto

32TAXI Experienced

32TAXI

Posted
Posted (edited)
sorry off topic but i always thought the "V" is for auto

S2 stagea's

RS-V 2wd auto

RS4-V 4wd auto

RS4-S 4wd manual.

Top up ATF and bleed whilst engine running, also check slave on rear of gearbox for leak/weep!

Edited by RED513

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Is it alright to top up with just another green coolant?
    • Songo
      New kid on the block

      By Songo · Posted

      thanks GTSboy. My confusion at the moment is i am trying to locate the ignition, ECU battery power and the ECU negative The closest thing i can find is the for the S15 on Page 8 of the Wiring Specialties web page https://drive.google.com/file/d/0B9F33_M_GgENQnZ6STMxVmVNd1E/view?resourcekey=0-eZ4nNRwRoqa1qvKlWWHm8A I cannot find the same diagram for the R33 RB25DET Series 2 dash plug pin out.... Do you know what the Pins? or know where i can find the same pinout diagram for the RB dash plug? Thanks for the advice on the box... i like a 6 speed so might be on the lookout or the box now.. a topic of discussion for another post...
    • Chupapy
      Coolant leak?

      By Chupapy · Posted

      Will have a look at that. I cant see any leaks 
    • GTSBoy
      Coolant leak?

      By GTSBoy · Posted

      Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • GTSBoy
      New kid on the block

      By GTSBoy · Posted

      Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
×
×
  • Create New...