Jump to content
SAU Community

Recommended Posts

Just get a new one. I got mine replaced at a windscreen place. Ring around, I found prices varied from $300-$500. I ended up getting it for $200 because they screwed up the invoice and forgot to add labour on to the price.

Aftermarket ones are ment to be better because they have the lamination inside and usually have a strip of tint on the top, plus you get all nice new seals around it.

Edited by PM-R33
Just get a new one.

Aftermarket ones are ment to be better because they have the lamination inside and usually have a strip of tint on the top, plus you get all nice new seals around it.

+1

Windscreen Service from Blue Mtns to the sea 1300369400

or Eddy Windscreens around Sydney 0414184584 or 95848504

otherwise the large commercial operations like O'Briens at higher prices due to their advertising costs

a mate who had his windscreen replaced in his 33 once told me that they are the same as a locally sold nissan, but i'm not sure which it is though. not sure if it was a 300zx or a r31 or something like that. either way it ended up only costing him about $200.

R33 and R34 windscreens are now locally made by PGI, so much cheaper than they used to be. My one was ~$300 and the guy came out to my house to do it.

PGI Glass

SKYLINE R33 2 DR COUPE 1993 - 1998 Catalogue number DN084 rrp $168

Edited by 666DAN

i paid around 400 i think - but one thing i did notice is on the replacement windscreen there is no little wire for front demister...

im not sure if nissan stock the ones with this or not though :domokun:

front demister?

do you mean the radio antenna like in an R32? I looked at a replacement windscreem for my old r32 gtst and it was about $300 for an aftermarket one (no inbuilt radio) or $800+ for a genuine one with the radio antenna wires.

I looked at a replacement windscreem for my old r32 gtst and it was about $300 for an aftermarket one (no inbuilt radio) or $800+ for a genuine one with the radio antenna wires.

I don't know what they were smoking but I rang Nissan for a price on a windscreen for my 32 GTST & they said there were two types available.

One was around $800 & one was a bit over $2000! No idea what it was that made it so expensive...

Then the guy who came to our shop to install windscreens quoted me $200 (no antenna) as he is good mates with the boss.

Ended up getting a dodgy roadworthy from the workshop next door to where I worked so never worrried.

Don't work there anymore. Should have got the $200 windscreen when I had the chance!

Do prefer the neat, inbuilt antenna but a mates S15 has a nice little antenna inside the car which you can hardly see.

Seems like the best option when the time comes

  • 1 year later...

+1

Windscreen Service from Blue Mtns to the sea 1300369400

or Eddy Windscreens around Sydney 0414184584 or 95848504

otherwise the large commercial operations like O'Briens at higher prices due to their advertising costs

EDDY IS GOOD, BUT YOU SHOULD USE HIS TEACHER GLENN AT PLATINUM WINDSCREENS WHO HAS MORE THAN 25 YEARS EXP. CALL HIM ON 0419228163 HE IS NOT THE CHEAPEST BUT IS THE BEST!

EDDY IS GOOD, BUT YOU SHOULD USE HIS TEACHER GLENN AT PLATINUM WINDSCREENS WHO HAS MORE THAN 25 YEARS EXP. CALL HIM ON 0419228163 HE IS NOT THE CHEAPEST BUT IS THE BEST!

Nothing wrong with a bit of self advertisement mate, but you should have been quicker! The op already had it done. Plus the third person speak isnt really necessary.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
×
×
  • Create New...