Jump to content
SAU Community

Recommended Posts

speedo won't work as i'm pretty sure the r32 speedo is cable driven while the later models are electronic. could probably overcome this by using the r34 gearbox, but will then have issues with the fact that the r34 sends the signal through the ecu and the r32 does it differently.

not sure about tacho

People forget one thing about the RB20.

Wind up the boost + basic mods till something goes pop and then jst drop another one in.

Their pretty cheap these days

so are rb25s and they last longer

NA section always provides a good lol :/:)

Edited by 32_Dave
I beleive that it isn't legal to put a motor from an older car into a newer one??

not certain though.

Certainly isn't allowed in SA; Not sure about other states tho ... I'd be contacting appropriate transport authorities and checking - but I'd doubt it'd be allowed (given ADRs, emissions, etc)

only difference is that to then go faster the rb20 is easier to extract more power out of. but that said, i'd go a rb25 because they will put out with the very basic mods (exhaust, cooler and a bit more boost) than what an rb20 will with more mods.

There was someone on this forum with an orange R34 4 Door with an SR20DET. The idea was that the SR20's could pull a lot of power with a smaller (2litre) engine which also reduced the weight and improved weight distribution.

I'm not sure how this compares to an RB20DET? One thing for sure is that you'll save on injectors, sparks, coilpacks etc.. with there only being 4 instead of 6.

If you were going to go to the effort of an engine swap, at leaste do it once do it right and put a larger displacement RB25 engine in, or why not turbocharge the RB25DE NEO?

Thanks all for the input :) running on rb20de neo is really a pain in the arse ... underpower! was thinking of TC it but have thought of throwing in a rb20det from a r32 will be much easy. seems like it not a great idea comparing to TC my rb20de neo. i am looking for those bolt-on kit for my r34 now but was advised to get parts from r33 will be cheaper ...

Thanks all for the input :) running on rb20de neo is really a pain in the arse ... underpower! was thinking of TC it but have thought of throwing in a rb20det from a r32 will be much easy. seems like it not a great idea comparing to TC my rb20de neo. i am looking for those bolt-on kit for my r34 now but was advised to get parts from r33 will be cheaper ...

Dude all i can say is research research research... I researched for over a year about what my better options were, and only now am i going through with the engine swap in my car, basically turning it into a GTT. It is one hell of a pain in the ass, easiest option by far would be to sell and buy a GTT. Reasons I didnt do that are because the body of my car is in very good condition, and i have spent over $10000 in upgrading the brakes, suspension, body kit, paint, everything. So really the only thing i was missing was the GTT engine, gearbox and drivetrain; decided that if i was to start again and buy a stock GTT, i would be back to square one, where the only thing i liked about the car would be the engine, etc. and i would have to spend money everywhere else again. Also I am just very attached to my car :D

There is a thread on here about how to turbocharge your NA, have a read of that and also speak to N-DAWG and 666Dan as they have been through it themselves and gave me some good advice about it.

Before you go looking for more power though, have you upgraded your brakes and suspension? Because if you stinge on those things, your power upgrade will not be very much fun at all...

My 2c

If you mod your car it'll probably be illegal and even if it isn't, you can still be defected for it and engineer's can still be reluctant to put their name on it (especially if the owner is clever enough to 'opt' for an RB20). I believe there's actually some legal problem with putting a smaller engine into a car too (at least in the sensible state of Vic).

I have been told by guys who've swapped RB20s into Silvias that it's the worst decision they ever made and when their budgets get back up to strength they usually reverse the swap or sell and buy another. A Silvia for sale with an RB20 is like a girl with the Jack. SR20s are capable of much more power, much more durable, better on fuel if that's on your list and more reliable.

But, you've got an R34, there's a reason Nissan dropped the RB20 when they thought of the RB25; and all your engine mounting points, gearbox mounts, driveline, aircon, other electrics etc. I would assume would mostly match up with an RB25DET. I think you'll find money you spend on the RB25DET will be way less than the cost difference or time consumption if you diy of putting in an RB20. If you just wanna be unique, try a 2JZ (Supra) or something?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Bit of a pity we don't have good images of the back/front of the PCB ~ that said, I found a YT vid of a teardown to replace dicky clock switches, and got enough of a glimpse to realize this PCB is the front-end to a connected to what I'll call PCBA, and as such this is all digital on this PCB..ergo, battery voltage probably doesn't make an appearance here ; that is, I'd expect them to do something on PCBA wrt power conditioning for the adjustment/display/switch PCB.... ....given what's transpired..ie; some permutation of 12vdc on a 5vdc with or without correct polarity...would explain why the zener said "no" and exploded. The transistor Q5 (M33) is likely to be a digital switching transistor...that is, package has builtin bias resistors to ensure it saturates as soon as base threshold voltage is reached (minimal rise/fall time)....and wrt the question 'what else could've fried?' ....well, I know there's an MCU on this board (display, I/O at a guess), and you hope they isolated it from this scenario...I got my crayons out, it looks a bit like this...   ...not a lot to see, or rather, everything you'd like to see disappears down a via to the other side...base drive for the transistor comes from somewhere else, what this transistor is switching is somewhere else...but the zener circuit is exclusive to all this ~ it's providing a set voltage (current limited by the 1K3 resistor R19)...and disappears somewhere else down the via I marked V out ; if the errant voltage 'jumped' the diode in the millisecond before it exploded, whatever that V out via feeds may have seen a spike... ....I'll just imagine that Q5 was switched off at the time, thus no damage should've been done....but whatever that zener feeds has to be checked... HTH
    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
×
×
  • Create New...