Jump to content
SAU Community

Recommended Posts

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

not willing to seperate at this stage mate, but if i do i'll let you know.

Power Fc and z32 will sell for $1350 together.

Forgot some things

Standard ECU rb25det SERIES 1 manual: $50

Kicker L7 sub in box: $400 ono

This sub took up the whole boot in the 33 coupe. Sounds awesome. A few scuff marks on the back of the box only on the outside...

sitting on top of 18 inch tyres to give you an idea of the size

post-29115-1276494556_thumb.jpgpost-29115-1276494534_thumb.jpg

Edited by mattis96

Hello, please let me know if your willing to sell the power fc ecu, dont need hand controller. thanks, :D

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

ill give you a call tonight before qld starts kicking ass or tomorrow? let us know what time suits you as i work night shift and dont my mobi is playing up, so will call you off home phone which is private number what ever time suits you... if buying multiple parts will do cheaper to...

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

hey mate is the z32 still up for grabs and wat size and condition is it in ? pm me back im in syd if your interested in shippin if the condition is right :D thanks mate

tried calling this morning no answer and no voicemail so couldnt leave a message. had interest but no buyers yet. am negotiable on some things...

Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

Edited by mattis96
Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

very interested pm me if not already sold

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So could it be assumed it has been installed intentionally with potentially a power FC boost controller kit? 
    • Had my rig on Matt's dyno at PITS the other day. After a few years between tunes I added a few sensors and swapped intercoolers. Result. 553hp at 26psi. Not bad for an FJ20 that was built in 2007. The problem.. It filled the overflow bottle on hard runs which leads me to believe the head gasket isn't sealing. I have a coolant pressure sensor which was reading cap pressure at 22psi and occasionally overrunning to 23/24 psi on deceleration after a pull. It was not spiking. It has arp2000 head studs and a cometic gasket. As its been 18 years in service, I pulled the engine out and head off. Everything looks good but we obviously have an issue. Where I'm at.. Years ago I had the same issue, I checked the stud tension and they were all over the place. Some at 60 to 70 and some up near 90. I nipped them all to 100ft lbs and this stopped the water push until now. I believe this compromised the gasket back then. What do I do? 2 options are..  1) I bought arp 625+s, which I could put in with a new gasket. Thinking Kameari this time, reassemble and try again. 2) strip the block, get fire rings machined in with copper gasket and try that. I do not want to push it more than 28 to 30psi. I think the turbo will be out by then anyway. (G30-770). My other concern is the long term ability of a copper head gasket. Are they streetable for years? I feel like a new gasket with the new studs will probably suffice, but I don't know. Any thoughts welcome and advice on copper gaskets and fire rings. Thanks!
    • I'm a fan of the JZX110, and the Aristo. Big cruiser cars, and with the factory cars, super comfortable and feel like you're driving an armchair! And the JZ motors are a pretty nice engine too, especially with some basic mods.   The import process, and the need to be able to trust people, and the fact there's so many scammers around is what ever puts me off wanting to go through that ordeal!
    • I don't care for these at all, but at least the underside looks straight and not rusty. A good basis for a long life. Many cars from Japan have been lifted with forklifts and f**ked almost irrepairably.
    • Yes, but it's not dumb or dodgy. You can build a perfectly good boost controller from a pressure reg, a relief valve (looks same same as a reg if all from Norgren or SMC, for example) and a check valve. I ran one for years. Only superceded with  EBC because I could get one for cheaps and wanted finer control.   THis mod is certainly not a sketchy boost mod, provided the boost is kept below the "spin to death" threshold of the turbos.
×
×
  • Create New...