Jump to content
SAU Community

Recommended Posts

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

not willing to seperate at this stage mate, but if i do i'll let you know.

Power Fc and z32 will sell for $1350 together.

Forgot some things

Standard ECU rb25det SERIES 1 manual: $50

Kicker L7 sub in box: $400 ono

This sub took up the whole boot in the 33 coupe. Sounds awesome. A few scuff marks on the back of the box only on the outside...

sitting on top of 18 inch tyres to give you an idea of the size

post-29115-1276494556_thumb.jpgpost-29115-1276494534_thumb.jpg

Edited by mattis96

Hello, please let me know if your willing to sell the power fc ecu, dont need hand controller. thanks, :D

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

ill give you a call tonight before qld starts kicking ass or tomorrow? let us know what time suits you as i work night shift and dont my mobi is playing up, so will call you off home phone which is private number what ever time suits you... if buying multiple parts will do cheaper to...

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

hey mate is the z32 still up for grabs and wat size and condition is it in ? pm me back im in syd if your interested in shippin if the condition is right :D thanks mate

tried calling this morning no answer and no voicemail so couldnt leave a message. had interest but no buyers yet. am negotiable on some things...

Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

Edited by mattis96
Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

very interested pm me if not already sold

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...