Jump to content
SAU Community

Recommended Posts

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

not willing to seperate at this stage mate, but if i do i'll let you know.

Power Fc and z32 will sell for $1350 together.

Forgot some things

Standard ECU rb25det SERIES 1 manual: $50

Kicker L7 sub in box: $400 ono

This sub took up the whole boot in the 33 coupe. Sounds awesome. A few scuff marks on the back of the box only on the outside...

sitting on top of 18 inch tyres to give you an idea of the size

post-29115-1276494556_thumb.jpgpost-29115-1276494534_thumb.jpg

Edited by mattis96

Hello, please let me know if your willing to sell the power fc ecu, dont need hand controller. thanks, :D

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

ill give you a call tonight before qld starts kicking ass or tomorrow? let us know what time suits you as i work night shift and dont my mobi is playing up, so will call you off home phone which is private number what ever time suits you... if buying multiple parts will do cheaper to...

As topic states im trying to sell some gear due to upgrading. All parts were working fine when removed from R33 GTS-T SERIES 1

1: Apexi Power FC with hand controller suits r33 series 1 & 2: $1250

2: Z32 afm with plug: $170

3: Stock Turbo, good condition, only went to 10psi with this: $150

4: rb25 fuel injectors, (can come with rail if needed and injector wiring and o-rings for $150): $100

5: Stock coilpacks RB25det series 1 (fine before removed): $100

6: Standard RB25 exhaust manifold: $20

7: R33 fuel pump: $30

8: Charcoal Canister: $20

9: Top half of intake manifold: $30

10: Intake manifold bottom half (will sell top and bottom for $50): $30

11: Brand new gasket for joining manifold together: $20

12: Turbosmart boost controller 1 way manual tee: $40

13: Apexi pod filter, bolts to standard afm (not sure about the z32 though, never tried): $40

14: Stock blow off valve: $20

15: Stock throttle body (without tps sensor): $30

16: Coil pack harness to ignitor for R33 series 1: $15

17: Front mount cooler piping 2 and a half inch: $80

18: 80mm to Standard size throttle bottle adapter: $30

19: Speco mechanical water temp gauge with sensor: $20

20: Standard boost controller solenoid with connector plug :$30

21: Standard Rotors front(29mm) and rear(17mm) bit of surface rust: $100

free pads with rotors if wanted, fronts not the best, rears are bendix ulimate(pretty much brand new): $20

22: Standear bolt on engine parts i havent listed i should have, just ask, eg: rubber intake hose

Will get pictures if needed but all parts are pretty coming and you should know what they look like

Can email pics straight away, just to lazy to resize them and upload them on here atm.

Pick Up is from North Brisbane, Caboolture.

i think prices are fair but willing to negotiate on some things

I will post if serious about parts, due to no transport atm though only ask if your serious please, i will only charge whatever it costs to send.

hey mate is the z32 still up for grabs and wat size and condition is it in ? pm me back im in syd if your interested in shippin if the condition is right :D thanks mate

tried calling this morning no answer and no voicemail so couldnt leave a message. had interest but no buyers yet. am negotiable on some things...

Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

Edited by mattis96
Dont know how to edit original post.

PRICE DROP on POWER FC: $1200 Delivered

PRICE DROP on Z32: $160 Delivered

TOGETHER: $1320 Delivered

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

hey m8 sory about late reply but yes i am still very interested ive just been trying to track down a NAB send me a pm and i will do a deposit at 11:00am wednesday morning

very interested pm me if not already sold

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

hey buddy, deposit recieved thanks, will send out first thing thursday morning, do you want it express or registered?

update on whats sold.

power fc

front mount piping kit

turbosmart boost controller

standard blow off valve

z32 afm pending payment / collection

coilpacks

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Even more fun, leave all the ADAS stuff plugged in, but in different locations, hopefully avoid any codes!   And honestly, all these new cars with their weird electronics. Pull all the electronics out Duncan, and just shove an aftermarket ECU and if needed a trans controller in, along with a PDM. Make it run basic but race car styled!
    • To follow up a question from earlier too since I had the front bar off again (fking!) This is what is between the bumper and the drivers side wheel And this is the navigator side, only one thing but its a biggy! So basically....no putting coolers in the wheel arches without a lot of moving other stuff. Assuming I move to properly race prepping this car I'll take that job on and see how the computers respond to removing a whole bunch of ADAS modules
    • So I prepped the car for another track day on Wednesday (will be interesting to see coolant temps post flushing out and the larger reservoir, with a forecast of 3-14 being 20o cooler than last time I took it out). Couple of things to mention; since I am just driving the car and not taking a support vehicle, I took the rear seats out and just loaded the back up Team Trackday style. Look at all that space! To cover off removing the rear seat....it is weird (note the hybrid is probably different because it wouldn't have folding rear seats) Basically, you remove the lower seat base, very similar to a r series but it is a clip that pulls forward to release the base rather than it being bolted down. Easy Then, you need to remove the side section of the rear seat on each side. There is a 14mm head nut at the bottom of the side piece, the it slides upwards off a hook at the top to release; you also need to unhook the seatbelt from the loop at the top. Then the centre piece is weird. You need to release/fold the seats forward with the tab in the boot on each side From there, there are 2,x12mm headed bolts holding the rear of each seat to the folding bracket, under the trim between the rear seat and the boot (4x christmas tree clips there, they suck). The seat is out but you can see where the bolts attach to the bracket
    • As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
×
×
  • Create New...