Jump to content
SAU Community

How To Get Impurities Out Of My Wheels

Harey

By Harey,
in Exterior & Interior Styling

 Share

Recommended Posts

Harey Veteran

Harey

Posted
Posted

Hi Guys,

I am trying to clean up my wheels. The middle part of the wheel cleans up nice with some wheel cleaner. However the dish remains stained. I have tried different wheel cleaners but it seems to be within the metal now. I also tried quickly some metal polish but no luck either.

Any ideas?

Here is a pic, needs to be closer but you get the idea.

post-29432-1276648538_thumb.jpg

GTR-N1 Grand Master

GTR-N1

Posted
Posted

Tried "Upper Engine Cleaner" from Subaru?

It could remove all the sh/t that was on my OEM wheels from Japan.

It works if Zymol wheel cleaner doesn't.

When it's all off, you may need to respray the wheels with 'clear'.

Harey Veteran

Harey

Posted
  • Author
Posted

Ah ok yup thats the next step if I cant do it pretty easily myself.

After some google searching I found two products, ALUPLUS and ALUBRITE. It is an acid that is supposed to clean aluminium and then polish it really well.

Think I will try that and then resort to a rim repair shop if it doesnt work.

75coupe Grand Master

75coupe

Posted
Posted

That ALUBRITE is a pretty harsh acid, Ive used it to clean the outside of the head, the cross over pipe and stuff like that.

ALUBRITE will burn your hands if you dont wear gloves its that strong, it will eat the duco as well and anything else that gets in its way... Ive used it in conjunction with a toothbrush to clean all sorts of things... it'll clean brake dust build up off rims, but it will also scar the paint and leave shiny alloy dull, I havnt tried it on powdercoat...

Harey Veteran

Harey

Posted
  • Author
Posted (edited)

But it should work on the aluminium dish of my rims as long as I dont get it anywhere else?

I will just try a very small part of the dish with a toothbrush to start off with.

Edited by Harey
wlspn Proficient

wlspn

Posted
Posted (edited)

As mentioned alloy brightener can make shiny alloy dull but if you then polish it you should be ok...

Be careful with the stuff. Wear a mask or don't breathe, & wear gloves. I use it at work to clean transmission cases & it's strong stuff!

You'll know when you breathe it in...

Edited by wlspn
Mr Eps Grand Master

Mr Eps

Posted
Posted

hey... okay here's what you do.

first of all.. this method sounds strange and it will be MOST noticable with bad rims (i mean RIM rims... not "wheels")

go to bunnings

get a very fine steel wool.

no. not that dishwashing crap that you use to get black stuff off pots. this is steel. wool. SIFA make it.

2175040__32055_thumb.jpg

looks like that.

rip a chunk off. big chunk. the bigger the chunk, the more surface area you have to scrub with. the more surface area. the less pressure. less pressure, less chance of scratching. get it?

use either water - or olive oil as a lubricant... i suggest olive oil as it won't ake the steel wool RUST. use a lot of it.

gently rub the steel wool on the wheel. if the stains won't come out, apply a little bit more pressure etc

the basic premise of this is... steel wool is soft as butter. but it is still a METAL. your aluminium / steel rims are a harder metal, and will not "give in" to the steel wool easilly

the steel wool sacrifices itself to clean the metal.

give it a go if you so wish - i imagine that there is a certain element of risk doing this method... but i've done it plenty of times on my wheels which - at one stage were VERY badly corroded.

steel wool is about 8/9 bucks

everyone else take note.

oh and wash the olive oil off the rim using a soap / detergent / shampoo (dah)

  • 1 month later...
Harey Veteran

Harey

Posted
  • Author
Posted
i think you need to determine if the dish area is clearcoated from factory - if it is, you will most likely need to remove that before being able to polish it.

Your right on the money here, the dish does have a clear coat.

I started with the steel wool and it wasnt doing much, so I went a bit harder and I could see it take the clear coat off and go down to metal. I have only done this in one small area.

What issues does removing the clear coat raise? Should I remove it or just leave it there and give up.

Harey Veteran

Harey

Posted
  • Author
Posted (edited)

These guys seem use aircraft stripper to remove the clear coat:

http://forums.corral.net/forums/showthread.php?t=763405

They just say it takes a bit more effort to keep em clean. Its only the dish of my wheels so dont have little nooks and crannys that would be tricky to keep clean.

Would love the rims to have a super shiny dish :happy:

I am leaning towards removing the clear coat.

Edited by Harey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      I get that taking off the head is best but that's a bit much for "just" valve seals. I was just under the impression that one would be able to rotate to TDC and be able to temporarily drop the valve without losing it and effectively having to remove the head to then recover it. I never knew people actually pushed rope into the cylinder to do valve seals hahaha So just to confirm, just going to TDC will not work? In that case I know when I do valve seals I'll maybe just remove the head and do some other things while I'm there, or just wait until I do an engine build.
    • GTSBoy
      Blue/grey smoke after idle

      By GTSBoy · Posted

      The old approach was to fill the cylinder/chamber with a length of rope pushed in through the sparkplug hole. The new approach is to connect compressed air to the sparkplug hole and fill it with enough pressure to push the valves up. Doing either of these things with the head on and the engine in the car is a lot less pleasant than doing it properly.
    • sunsetR33
      Blue/grey smoke after idle

      By sunsetR33 · Posted

      Can't you put the pistons to TDC and then do the valve seals? Or will the drop down too far to pull them back up?
    • sunsetR33
      Replacing turbo water line - any recommendations or advice?

      By sunsetR33 · Posted

      One thing I can tell you is, do it properly the first time. If you encounter unexpected problems just let the car sit for a week or two if you have to get some other parts or figure stuff out.  I'd have said go and use as many OEM parts as possible but since you want to change the turbo later on a custom kit is probably the better choice. Since I have no experience with RB25 just compare parts diagrams and images before buying a line kit and it should be easy to see if it has everything you need. Amayama has very good parts diagrams and part number lists, that is what I used a bunch to figure out what I might need. And don't forget to plan ahead and possibly renew other stuff that's easy to get to while you're in there doing the turbo lines. Happy wrenching
    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      Update 4:   Hi all, good news. Engine is running and all the gaskets and seals seem to be working as intended. No leaks so far, even the JB Weld seems to hold. I flushed out the old coolant a few times and put in fresh coolant, not Nissan stuff, I decided to try the Ravenol Protect FL22, they claim it works for a wide variety of JDM cars and the opinions on it by some people were pretty good. And it has the nice poison green color! And man am I glad I bought a coolant system tester earlier this year, vacuum filling works wonders on this engine. I can definitely recommend this to anyone still doing it the old school way. All you need is compressed air supply. Will have to do a small test drive as soon as I can, I removed the gauge cluster again as the tacho needle was still bouncing around a bit but it was much better than before already.  I also found some cracks on all 4 tires inner and outer sidewalls. Apparently these tires should 't be parked on for extended periods or be kept under 0 degrees during storage, which I did not know. Clearly the previous owner didn't look into those details either, he probably bought them just cause they are cool semi-slicks. I'm just wondering how tf I am supposed to reach 30-80 degree tire temperatures on the public road consistenly, these tires were never going to work for my use case. I'll probably order Continental SportContact7 ones as these are the best allround summer tire available right now and I don't think I'll need anything crazier for now. Do let me know if you have experience with various tires and which ones you recommend.
×
×
  • Create New...