Jump to content
SAU Community

Recommended Posts

Hi Guys,

I am trying to clean up my wheels. The middle part of the wheel cleans up nice with some wheel cleaner. However the dish remains stained. I have tried different wheel cleaners but it seems to be within the metal now. I also tried quickly some metal polish but no luck either.

Any ideas?

Here is a pic, needs to be closer but you get the idea.

post-29432-1276648538_thumb.jpg

Tried "Upper Engine Cleaner" from Subaru?

It could remove all the sh/t that was on my OEM wheels from Japan.

It works if Zymol wheel cleaner doesn't.

When it's all off, you may need to respray the wheels with 'clear'.

Ah ok yup thats the next step if I cant do it pretty easily myself.

After some google searching I found two products, ALUPLUS and ALUBRITE. It is an acid that is supposed to clean aluminium and then polish it really well.

Think I will try that and then resort to a rim repair shop if it doesnt work.

That ALUBRITE is a pretty harsh acid, Ive used it to clean the outside of the head, the cross over pipe and stuff like that.

ALUBRITE will burn your hands if you dont wear gloves its that strong, it will eat the duco as well and anything else that gets in its way... Ive used it in conjunction with a toothbrush to clean all sorts of things... it'll clean brake dust build up off rims, but it will also scar the paint and leave shiny alloy dull, I havnt tried it on powdercoat...

But it should work on the aluminium dish of my rims as long as I dont get it anywhere else?

I will just try a very small part of the dish with a toothbrush to start off with.

Edited by Harey

As mentioned alloy brightener can make shiny alloy dull but if you then polish it you should be ok...

Be careful with the stuff. Wear a mask or don't breathe, & wear gloves. I use it at work to clean transmission cases & it's strong stuff!

You'll know when you breathe it in...

Edited by wlspn

hey... okay here's what you do.

first of all.. this method sounds strange and it will be MOST noticable with bad rims (i mean RIM rims... not "wheels")

go to bunnings

get a very fine steel wool.

no. not that dishwashing crap that you use to get black stuff off pots. this is steel. wool. SIFA make it.

2175040__32055_thumb.jpg

looks like that.

rip a chunk off. big chunk. the bigger the chunk, the more surface area you have to scrub with. the more surface area. the less pressure. less pressure, less chance of scratching. get it?

use either water - or olive oil as a lubricant... i suggest olive oil as it won't ake the steel wool RUST. use a lot of it.

gently rub the steel wool on the wheel. if the stains won't come out, apply a little bit more pressure etc

the basic premise of this is... steel wool is soft as butter. but it is still a METAL. your aluminium / steel rims are a harder metal, and will not "give in" to the steel wool easilly

the steel wool sacrifices itself to clean the metal.

give it a go if you so wish - i imagine that there is a certain element of risk doing this method... but i've done it plenty of times on my wheels which - at one stage were VERY badly corroded.

steel wool is about 8/9 bucks

everyone else take note.

oh and wash the olive oil off the rim using a soap / detergent / shampoo (dah)

  • 1 month later...
i think you need to determine if the dish area is clearcoated from factory - if it is, you will most likely need to remove that before being able to polish it.

Your right on the money here, the dish does have a clear coat.

I started with the steel wool and it wasnt doing much, so I went a bit harder and I could see it take the clear coat off and go down to metal. I have only done this in one small area.

What issues does removing the clear coat raise? Should I remove it or just leave it there and give up.

These guys seem use aircraft stripper to remove the clear coat:

http://forums.corral.net/forums/showthread.php?t=763405

They just say it takes a bit more effort to keep em clean. Its only the dish of my wheels so dont have little nooks and crannys that would be tricky to keep clean.

Would love the rims to have a super shiny dish :happy:

I am leaning towards removing the clear coat.

Edited by Harey

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...