Jump to content
SAU Community

Recommended Posts

Gday wagoneeirs,

Ive just taking my stagea off the road for a few days to upgrade the front brakes and replace all my wheel studs (had 1 snapped),

its up on axle stands at the moment and i was doing some curiosity looking around and found this problem

basically my front passenger wheel does not drive, the other 3 wheels where spinning, i then locked the diff and this didnt help,

the inner CV is a little cracked and from what i could see it didnt look very "greasy", i dont think it would be something as easy as jsut grease her up mate haha,

so any thoughts?

im hoping im not up for a diff or something like that, i would hate that,

cheers lads

Link to comment
https://www.sau.com.au/forums/topic/325201-front-wheel-not-turning/
Share on other sites

I'll preface my comment with the disclaimer "I could be wrong, but" generally with open centre diffs (which the front one should be) it is common for only one wheel to spin,when driven unloaded, I.e.;off the ground. If there is a slight difference in resistance across the axle, for example a dragging caliper, tight wheel bearing; the torque will take the path of least resistance; the wheel with the least drag/resistance. This is exactly what a differential is supposed to do. If both wheels had EXACTLY the same amount oF grip (resistance), both wheels would spin.This is also why a open centre diff will spin one wheel; this wheel has less grip than the other.

I like the sound of that theory cause it means nothing wrong hahaha, i dont know if it would explain it, because i locked the diff and it made no differnece, but fingers crossed that its that simple haha, thanks mate

Further to last post, if you were to stop the rotating front wheel from turning (DO NOT do this whilst the hub is turning; broken fingers are not nice!) you would likely find the stationary front wheel would now be the path of least resistance and would now be turning. the reason both rear wheels are turning is likely because you have an lsd in the rear diff and the internal friction of this will force both rear wheels to rotate.

Someone else is likely to be able to explain this in much simpler terms, but that's it; in a nutshell...

Hope its nothing to do with those R33 wheels i sold you! lol

How are ya Paul?

hahha nah mate, ive got R34 GTR rims now :D,

im alright aye, just starting to get serious about doing mods again now that my house is almost finished, been walking around on concrete floors for 6 months now haha,

hows the xtrail goin mate?

I like the sound of that theory cause it means nothing wrong hahaha, i dont know if it would explain it, because i locked the diff and it made no differnece, but fingers crossed that its that simple haha, thanks mate
What do you mean you "locked the diff"? How? If you mean you turned on the synchro button that just ensures that some drive goes to the front diff. I don't know of any way to lock the front diff.

Try to find a bit of road with a loose metal shoulder. Drop the LH wheels in to the loose metal and boot it (with the synchro button on) and then turn the car around and repeat . get someone outside the car to observe whether you are getting drive from both front wheels.

can you imagine how hard it would be to turn if you didnt have an open centre front diff?

Just grab the wheel that wasnt turning and spin it by hand, if the front drive shaft or other wheel doesnt rotate then you have a problem.

Couldn't you just turn it on and " drive" it on the stands?
hmm good idea, but the vibrations of the engine/drivetrain would make it pretty unsafe IMO. I could be wrong though...

It should be fine as long as you DON'T try and drive the car as if it was on a dyno run. Keep the wheel speeds low just to check if everything is working okay, and the vibration shouldn't be an issue.

yeah its just the open diff

start it up and put it in first gear

all 4 will spin . mine did .

if only the drivers front spins it will be going twice as fast as the rears

the left one drags beecause it has to pass through the sump (an extra bearing and seal)

NO STAGEA OR SKYLINE HAS EVER HAD A CENTRE DIFF .

IT HAS A FRONT DIFF AND A REAR DIFF

AND A TRANSFER CASE CONTAINING A ELECTRONICALLY CONTROLED HYDRAULICLY ACTUATED WET MULTI PLATE CLUTCH

all front diffs are open

wrxs and evos and sss bluebirds have centre diffs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • What does it look like with highway driving? And yes, I had a similar thought as Duncan. It looks quite similar in my Stagea and I have made myself accept it as normal. Might have to look into it some day  
    • While I was waiting for the new parts to come in for the charge pipe and radiator I decided to do some turbo modification. The drive pressure (exhaust backpressure) was a lot higher that I thought it should be. For 32lbs of boost drive was 55lbs. The turbine housing is a 1.10AR and my turbo builder has suggested to go to a 1.25AR. To test if a larger AR would do anything to reduce drive pressure AND not spend any money I decided to hog out the divider in my current housing. I removed it from the inlet and the whole way through the housing.  After reassembly and testing it doesn't look like this modification did anything for reducing drive pressure or requiring more fuel (making more power). Oh well, it was worth a shot. We'll get some data at the track if it makes it past the 60ft. I also machined a $7 shift knob off Amazon to fit my Stillway shifter since I didn't like the Stillway shift knob. Next on the list was the radiator replacement and fabrication of a new intercooler tube that had no silicon coupler. No pictures of this - I was short on time each night after work to get this done and didn't stop to take pictures.  Next was to get the clutch disks out and replaced. Previously when installing the dogbox I had ordered a set of the same sintered iron disks I had been running because I switched to the 26-spline input shaft. I thought it was odd that they didn't have any markings or brand name on them like all my old disks had but installed them anyway. At the track I could not get the clutch to lock up using my normal strategies. After two track nights I reached out to the clutch manufacturer and ask their thoughts. They said they had to switch the material out because they were having trouble getting the original material and that this new material would not take to being slipped very well.  So out with the first set of 26-spline disks and in with the correct material 26-spline disks. While I had the trans out I added an inspection/service hole. I've wanted one of these for a while. Now I can have a look at things and change the front cover shimming when needed (clutch wear). I hustled and got the clutch change done in a few hours on a Saturday. Hopped in the car and drove home. On the way home I did a 1-3 pull. When shifting from 2nd to 3rd the core plug in the back of the cylinder head popped out and dumped all the coolant. Thankfully I was only 30 seconds from home and coasted it there. Datalog showed nothing unusual and 2.5psi of coolant pressure. That plug has been in there since 1992 but I guess it worked its way out. Pulled the trans AGAIN and replaced the plug, JB welded it in, and made a brace. Also deleted the head drain I had added in during the bearing issue fiasco.  I am currently changing my boost control plumbing to make it cleaner. After that is done I'll make another attempt at getting past the 60.
    • Are you 100% sure this isn't tune related?
    • 140-150 across the board. At this point hoping the grounding harness fixes it. My grounds are all tied to the chassis and none to the battery. For SR and KA that’s never been a problem for me but had a few other guys here and Reddit who told me RB really like a very solid ground setup tied to the battery so going to try that next, I’m stumped if that doesn’t do it. Never had a car have spark and fuel and not fire off before. Only thing I can think is the spark is intermittent/weak because of grounds nothing else really makes sense at this point 
    • I am having close to the same issue. Can you help me with what wire you grounded to get your pump to trigger?
×
×
  • Create New...