Jump to content
SAU Community

Recommended Posts

  • Replies 44
  • Created
  • Last Reply

Top Posters In This Topic

speaking of mitsubishi, you can put me down for an Evo7!

why are you only limiting yourself to gtt's and bnr34's and rx7's?

why can't you do all cars on demand?

Franks, why Evo7. WHy not go for the latest, eVo VIII....i heard it rock! but will not roll. hehe

Nah don't bring 34's in...I want to stay at least semi-exclusive :P

Seriously though as far as bringing in 34's....I'll believe it when I see it. I was expecting my R34 replacement back in September, when I was assured it was

"only" 4 weeks away.

Since then I've put a turbo on my one, and I'm now quite happy to keep it.

Dan

4500 sounds a little bit more reasonable for a JZX100 Chaser. How much is the Stagea compliance? I dunno if this is the right place to ask, but what are the variants of Stagea? I know there are 4wd and twin turbo RB26DETT ones.... Newest model Stagea looks wicked. Would be awesome for a family car, chaser included.

SCREW THE AVALON!!!

Stagea should be around the same price but contact Frank for exact info he is doing the cars already for the eastern states, freight out of here is realy cheap.

All Stageas that can currently come in are 4WD 2.5 turbo auto (very few 5 speed) add 600,000 yen if 5 speed

RB26DETT is later down the line,

I will get mine soon and this is what will happen,

GTR diff front and rear $650 each, GTR 5 speed $1,500 and they bolt straight up or just put a RB26DETT into a auto car it all fits as it is R33 running gear.

Look at what Jeff at www.c-red.com.au did to his one.

Or auction lists at www.j-spec.com.au to view options.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...