Jump to content
SAU Community

Recommended Posts

Did the same conversion in mine but mines a r33 4 door but the rb26 was worked, forged pistons, acl bottom end bearings the works. I love it, i rekon its the best thing ive eva did to the car,i put a 34gtt gearbox in, lots of wheel spin and fun. :thumbsup:

For sure the rb26 is a great engine conversion for any Nissan I've seen them go in 260z's would have been nice if Nissan had made them 2.8 or 3l from the factory but they are still a great engine at 2.6

For sure the rb26 is a great engine conversion for any Nissan I've seen them go in 260z's would have been nice if Nissan had made them 2.8 or 3l from the factory but they are still a great engine at 2.6

HKS V-Cam!

:thumbsup:

Got the car up and runing last night fixed the few issues it had and test drove it. Test drove very good even at 8-9 psi moves nice. Will get it on the dyno and tune it up

Nice, post up dyno chart when done.

  • 2 weeks later...

Finally got the car onto the dyno only had enough time to get some prelim tuning done up to 10psi as the client wanted the car back so didnt get enough time to install the boost controller.

Here is a video of the car on the dyno, as i said earlier that we used the RB20 gearbox and as you can here in the video the 4th gear syncro is worn and has seen better days.

Enjoy some RB sounds on the dyno.

  • 3 weeks later...

The new E1280s from adaptronic is pretty sweet isnt it? even the old boxy version was pretty sweet for basic applications. The new one will probably replace the d-jetro PFC in our race car soon for a bit more R&D

Hey Trent

It's a nice bit of gear for the price far more advanced then a dejetro for a track car you have all the nice little features plus the ve tuning i started out with the e420c without ve then upgraded the firmware to ve and was much nicer.

Have you played with and mega squirts?? A mate of mine in qld swears by them the new ms3 has got some good features for a dirt cheap ecu the only downside you have to stick them together but a few place in the states put them together as a built unit.

Been playing around with your favourite ecu tonight pnp wolf v4 on a 33.

To be honest I Carnt go past nistune for any Nissan I really love to use them.

Ahh fair enough good excuse. Would like to get to the states one day check out the cars we are heaing to japan in October after Bathurst tho.

We are going to try do a full Vic season next yeah in the 31

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...