Jump to content
SAU Community

Recommended Posts

Hi folks, I have a fairly mild R33. Mods are limited to a full 3inch catback exhaust, std airbox with custom ram air scoop and BMC filter as well as an R34 intercooler.

I plan to doing the free boost mod in the short term to get 7-8psi the whole time. (maybe 9-10 given my supporting mods?)

Will the std fuel pump flow enough for this setup or will it need to be upgraded? If so what is the reommended part numbers?

My current fuel pump appears in good nick, not noisy, and the car does not appear to be running out of fiel up top, pulls strong and no missing or running issues.

Thanks

Jason

it will be fine to around 230rwkw from memory.... you could/should replace it if you want piece of mind as fuel is very very important and it will be 15 years old by now

If it ain't broke don't fix it doesn't apply to old fuel pumps. If it leans out or fails at high revs bang goes your motor. There is a Walbro with the skyline fitting kit:

http://www.nzperformance.co.nz/store/walbr...mp/prod_80.html

or the Bosch 040 in tank.

i had a strange miss at idle one day so it put a new Walbro fuel pump in and has been great fixed up the miss at idle i was pretty sure it was on its way out :)

there are a lot of fake walbros though so be careful but for $180 bucks its cheap upgreade knowing your not going to run out of fuel

If it ain't broke don't fix it doesn't apply to old fuel pumps. If it leans out or fails at high revs bang goes your motor. There is a Walbro with the skyline fitting kit:

http://www.nzperformance.co.nz/store/walbr...mp/prod_80.html

or the Bosch 040 in tank.

Had it 4 years like this

Any part on a car can fail at any time be it new or old

Edited by jjskyline79

The problem with fuel pumps is if they go from working to failure instantly while driving around normally it's usually fine as the car will usually just stall on you or simply won't start as others have said. It's when they slowly begin to fail and it gradually leans out more and more due to a loss in fuel pressure or when you start giving the car a bit of a thrashing, that's when it can take an engine with it.

PM-R33 is spot on. if it fails this is OK as the engine stalls

its only when you are pushing power out of it, and it cant keep enough

the engine has enough fuel to run, but not enough to be safe, so it leans out

your engine goes bang

we've seen a GTR R34 do this with a pump that couldn't keep up, costly rebuild and dangerous fire

i have basically the same mods as you and my pump is fine.

even though it is still working ok i am going to change it very soon.

i figure for $150-$180 it is a very cheap assurance.

and going by the recommendation of well known skyline mechanic, the walbro is fine to use.

there is one guy in this country who has gone through 4 engines in the last 3 months. he kept rebuilding the engine and was not interested in searching for the reason it is happening.

He is now asking for my help. Pump will be replaced and AFR's will be checked now ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...