Jump to content
SAU Community

Recommended Posts

  • Replies 77
  • Created
  • Last Reply

Top Posters In This Topic

Leewah on here is running 526rwkw with big ass single garrett and shot of NOS and has ran a 10.6 1/4.  

Congrats on the big number. Don't forget peoples that the run was done in Shootout mode too which generally speaking will give a slightly higher reading than a dyno run on a calibrated setting.

My run was done on the standard settings for DD dyno. Shootout mode would have produced a bigger number.

http://iceperformance.com.au/LeeWahGTRNOSRun.jpeg

The best for my car so far was a 10.47@137MPH when it only had 446rwkw. We have not had a clean NOS run yet as the clutch was slipping when we went out last. The best so far with the NOS was a 10.7@132MPH but we have seen a MPH of 140 but the time was still only a 10.7 coz I bogged the launch :P

Good luck at the track and hope to see some good times.

Merli - haha... your signature is cracking me up...  

how long are you planning on haunting the poor bastard? :D

I was only going to leave it up for 2 days or so, but he pissed me off by being a gutless wonder and deleting the thread, so I might leave it for a bit longer :P

I was only going to leave it up for 2 days or so, but he pissed me off by being a gutless wonder and deleting the thread, so I might leave it for a bit longer :P

I say leave it till you see him driving a gemini around.

Leewah

On that dyno run where did u have the nos come in?

the fact of the matter is if you can get confused between a black skyline and a white one you must be pretty dumb.

Mate, the 'black' car in the video is BLUE! now who's confused :Oops:

Seriously though, they guys were a bit hard on you. But don't tell 'em to lighten up, then go and take their comments to heart and have a tantrum.

Richard

Wise words from a 20 year old kid from the UK, trying to tell an Australian Skylines Forum about one of the most famous GTRs in Australia  uh.gif

Yes i am 20, yes i'm from the UK. Wow, you really got me there.

What does my age have to do with it? I'm in my final year at uni and completely self dependent. I'm hardly what you'd call a 'kid'.

Granted i didn't know that skyline was one of the most famous in Australia, i didn't even know where it was from. As far as i'm concerned somebody posted some dyno results and i thought i'd add to the thread by adding that video - after all it was another skyline on another dyno.

... and you should really take your own advice. We didn't even flame you for it, we just commented how your post came out of nowhere and didn't really pertain to the thread at all.

You didn't need to flame me for it. Imagine you posted something interesting in a forum where you hardly know anyone and all of a sudden people are saying, "why the hell did you post that?"

You'd be a little peeved and a little embarrassed.

Mate, the 'black' car in the video is BLUE! now who's confused  

Seriously though, they guys were a bit hard on you. But don't tell 'em to lighten up, then go and take their comments to heart and have a tantrum.

You're right, i didn't notice before but it is a very dark blue. Still, my point remains. I don't see how people were getting confused between "the skyline in the pics" and "the skyline in the vid", or "the dark skyline" and "the white skyline".

:)

Anyways, i'm not here to make enemies. Maybe i was out of order, maybe they were out of order. It's just a stupid argument at the end of the day.

Nothing more to say.

Yes i am 20, yes i'm from the UK. Wow, you really got me there.

What does my age have to do with it? I'm in my final year at uni and completely self dependent. I'm hardly what you'd call a 'kid'.

Granted i didn't know that skyline was one of the most famous in Australia, i didn't even know where it was from. As far as i'm concerned somebody posted some dyno results and i thought i'd add to the thread by adding that video - after all it was another skyline on another dyno.

You didn't need to flame me for it. Imagine you posted something interesting in a forum where you hardly know anyone and all of a sudden people are saying, "why the hell did you post that?"

You'd be a little peeved and a little embarrassed.  

You're right, i didn't notice before but it is a very dark blue. Still, my point remains. I don't see how people were getting confused between "the skyline in the pics" and "the skyline in the vid", or "the dark skyline" and "the white skyline".

:)  

Anyways, i'm not here to make enemies. Maybe i was out of order, maybe they were out of order. It's just a stupid argument at the end of the day.

Nothing more to say.

You are right... Arguing on the internet is like competing in the special Olympics. You may win, but you are still retarded...

Thanks for the dyno clip.

Guys the dyno is correct, it has not been edited on photoshop or anything like that. He is running GT2530 turbos and there is no nos kit on it.

I think for that run of 526 kws they used a massive amount of boost 25+psi just to break the 500kw barrier. It is normally setup for 450kws or something like that.

And stacy is the guys girlfriend who the car is registered through.

GT2530s? No nitrous? 526kw@wheels? I hate to be the first one to say it, but...... no.

If 526kw is a real figure, he should clear 140mph at Eastern Creek, and dip into 9s, and I predict that isn't going to happen with just GT2530s and no nitrous.

I'd love to see it run though and prove me wrong :(:)

Damo, i think your friend should book himself in as an entrant for the next nobel prize for physics, as he sure hell have proven the laws of basic aero-physic are wrong. 526kw@w

on those turbos? Some how i don't think so.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...