Jump to content
SAU Community

Recommended Posts

Hey guys,

Anyone here had any experience with K-Sport coilovers?

Im looking at getting new suspension and i came across some of the K-Sport height adjustable coilovers?

Are they worth getting or are they crap?

cheers

Link to comment
https://www.sau.com.au/forums/topic/326957-k-sport-coilovers/
Share on other sites

Hey guys,

Anyone here had any experience with K-Sport coilovers?

Im looking at getting new suspension and i came across some of the K-Sport height adjustable coilovers?

Are they worth getting or are they crap?

cheers

Have you thought about contacting Ryan from ISC Performance. He sells the N1 coilovers and they're noice for the price. :rofl2:

He's also a club sponsor with 10% discount ... just show your membership card. And he's local, so he's quick with service and answering you questions.

I've had a set of these coilovers on my Stag for over 18 months now and no complaints.

http://www.isc-warehouse.com/index.php?mai...ff5534bfc0b60be

:D

i have ISC coilovers my only complaint is there too stiff BUT you can choose the spring rates however i bought mine 2nd hand so had to put up with what the previous owner got

that being said when i got them the end caps didn't fit my application and Ryan changed them to suit without even thinking

EDIT

Ryan is this what the new N1's look like or are they still blue

isc_strut2.jpg

Yeah steve that's what they look like now, they are pretty stiff for standard coiloves spring rates (8/6), consider bc coils if it's used mostly as a daily. Cheap and comfy while Doing the same as othe base level coils

I work as an Automotive engineer, and certify coil overs as for road use required by transports SA. Of all the ones I have Seen K-sport were the worst. The vehicle was a Z32 Fairlady (300ZX) the total suspension stroke was 70 mm approximately 1/2 of that was droop travel so from normal ride height to fully compressed there was about 35mm travel before the shock bottomed out and 30mm of that was taken up by bump rubbers.

so awesome 5mm of suspension travel before hitting bump rubbers.

And wouldn't you know it all 4 shocks had blown seals and were leaking and from memory he had them in for less than a year. Not surprising that they were all blown seens as they were bottoming out all the time

I work as an Automotive engineer, and certify coil overs as for road use required by transports SA. Of all the ones I have Seen K-sport were the worst. The vehicle was a Z32 Fairlady (300ZX) the total suspension stroke was 70 mm approximately 1/2 of that was droop travel so from normal ride height to fully compressed there was about 35mm travel before the shock bottomed out and 30mm of that was taken up by bump rubbers.

so awesome 5mm of suspension travel before hitting bump rubbers.

And wouldn't you know it all 4 shocks had blown seals and were leaking and from memory he had them in for less than a year. Not surprising that they were all blown seens as they were bottoming out all the time

So when you say you work for dtei do you engineer cars for the general public?

Yes that is the new version of the ISC N1. They are also valaved approx 10-15% softer then the older blue N1 spec coilovers, this along with a suitable spring rate and 32 steps of damper adjust will see a reasonably comftable ride on the street whilst still being firm enough to head out to your local track days etc.

I bought a new set of K-sport coilovers for my 2006 STI , they lasted about 25000km of road driving and the odd track . both rears started spitting out fluid and started cluncking - shit themselves , performance and ride was average as well . i will never buy anything K-sport again .....

i think its a bit shit how people rate their coilovers. They are only as stiff as the chosen spring rates allow?

With local support and parts heaven forbid anything breaks, ISC!

Too true.......there so many half decent shocks out there that are ruined with nasty springs.......even my beloved Bilsteins can feel like crap if mated them with the wrong springs.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • How dare you sell your unreliable Skyline and buy a reliable, Toyota/Yamaha car with a strong gearbox, torsen LSD and Toyota reliability. At least you won't need to worry about oil pumps, big catch can, oil restrictors, blowing off power steering belts, sheering off 3rd gear, failing ABS relays/pumps, etc.
    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
×
×
  • Create New...