Jump to content
SAU Community

Recommended Posts

I have lightened the stereo setup in the boot & concerntrated the weight more toward the axle. yet to finish it off.

New Wolf V4 to go in.

Lightweight Flywheel & pretty blue pressure plate all thanks to ERD & NPC Clutches

300km/h speedo to go in next week

  • 4 weeks later...

I was driving on the RS-R tyre the other day and I cant believe how grippy they are and how well they hung in there after 10minutes of understeering-over driving and our braking myself, ie they would have been way hot!

Shame I cant update the lap times in the Motorsport section, only Admin people can go back and update now :)

  • 3 weeks later...

I forgot to get the print out when I was ther last, will grab it when the wolf goes in, plenty of scope for the Turbo left, can run the thing at 24-26psi I have been told by garrett & MTQ

I wont be using that much boost until I forge the motor tho, & even then I will probably be happy with 300-320rwhp as it is only a 2L & it goes like hell now with 280-ish @ 15psi & that should 300+ be with around 18-20psi

  • 3 months later...

Hey mate just wondering how the lil rb20 goes with the disco potato responsive? Goox mid range? Good top end? Am looking into buying one for my lil 20 the gt35r that was on it was a terrible choice on the last owners behalf

  • 3 weeks later...

New goodies en-route

Velo Fixed back bucket seat-ADR & FIA approved.

External Oil Cooler

New wiring loom

Dimpled & Slotted Rotors(RDA)

Hawk Brake Pads R Series(Rear)

Lightweight 17x8 Rims offset 30

300kph Speedo cluster

LED Tail light kit

Autometer Oil Temp & Oil Pressure Guages

Autometer Water Temp Guage

Turbo Smart Boost Controller

Shortened Length I/C Piping

Water Methanol Injection Kit

I am on a project in Virginia and looking at bringing my car up in March to do some track work up in QLD...do you have any plans of doing any track days in the coming 4-6 weeks?

Certainly do Roy, give me a bell when you know which days you will be up mate

  • 4 months later...
  • 6 months later...

RB25Det NEO Engine/GBox/ECU has just been fitted & Mod Plated into the Lil War Machine :) so she is no longer a humble RB20.

Pushed the old gurl a little too hard at the last Time Attack Raceday & busted the Engine big-time. Cylinder 6 held compression when cold & leakdown test but as soon as the engine warmed up all sorts of nonsense started-loss in compression & leakdown failure. The engine idled rougher than a hairy goat.

So after careful deliberation & pondering what engine to replace the 20 with (ie 25, 26 or 25Neo) I decided on the RB25DET Neo Motor & Gearbox option-due to more modern tech & parts availability for future rebuilds.

Engine & Gearbox is installed & runs like a dream. Much fatter torque curve down low & with all the ancillary mods around it we got a respectible 222.9rwhp out of the Stock Neo trim with increased fuel pressure(pump®).

Big plans are in mix for her now with larger Turbo, Seimens injectors & that Wolf ECU I have lying around here somewhere. Also a half cage just to keep things relatively safe in cabin for the nutcase driver too :)

Overall goal is 350rwhp & final upgrade of Wolf V4 to a Wolf V550 as to run 2 fuel maps (98Ron & E85) perhaps to around 400-450Rwhp.

Only minors to fix like leaky power steering pump & we will soon see it back to bedlam mwahahaha.thumbsup.gif

use the mounts that come with the engine. they will sit the engine in the right spot. I did the same with mine.

todd ,

need to go for a strap with in it at some point.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...